From: Daniel Baluta <daniel.baluta@nxp.com>
To: "robh+dt@kernel.org" <robh+dt@kernel.org>,
"shawnguo@kernel.org" <shawnguo@kernel.org>,
"timur@kernel.org" <timur@kernel.org>,
"nicoleotsuka@gmail.com" <nicoleotsuka@gmail.com>,
"broonie@kernel.org" <broonie@kernel.org>
Cc: "mark.rutland@arm.com" <mark.rutland@arm.com>,
"kernel@pengutronix.de" <kernel@pengutronix.de>,
"s.hauer@pengutronix.de" <s.hauer@pengutronix.de>,
"festevam@gmail.com" <festevam@gmail.com>,
dl-linux-imx <linux-imx@nxp.com>,
"devicetree@vger.kernel.org" <devicetree@vger.kernel.org>,
"linux-arm-kernel@lists.infradead.org"
<linux-arm-kernel@lists.infradead.org>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
"Xiubo.Lee@gmail.com" <Xiubo.Lee@gmail.com>,
"lgirdwood@gmail.com" <lgirdwood@gmail.com>,
"tiwai@suse.com" <tiwai@suse.com>,
"alsa-devel@alsa-project.org" <alsa-devel@alsa-project.org>,
"S.j. Wang" <shengjiu.wang@nxp.com>,
Daniel Baluta <daniel.baluta@nxp.com>
Subject: [PATCH 1/3] ARM: dts: imx: Add mclk0 clock for SAI
Date: Tue, 28 May 2019 13:21:00 +0000 [thread overview]
Message-ID: <20190528132034.3908-2-daniel.baluta@nxp.com> (raw)
In-Reply-To: <20190528132034.3908-1-daniel.baluta@nxp.com>
From: Shengjiu Wang <shengjiu.wang@nxp.com>
Audio MCLK source option is selected with a 4:1 MUX
controller using MCLK Select bits in SAI xCR2 register.
On imx6/7 mclk0 and mclk1 always point to the same clock
source. Anyhow, this is no longer true for imx8.
For this reason, we need to add mclk0 and handle it
in a generic way in SAI driver.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
---
arch/arm/boot/dts/imx6sx.dtsi | 6 ++++--
arch/arm/boot/dts/imx6ul.dtsi | 9 ++++++---
arch/arm/boot/dts/imx7s.dtsi | 9 ++++++---
3 files changed, 16 insertions(+), 8 deletions(-)
diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi
index b16a123990a2..682207b5d868 100644
--- a/arch/arm/boot/dts/imx6sx.dtsi
+++ b/arch/arm/boot/dts/imx6sx.dtsi
@@ -1071,9 +1071,10 @@
reg = <0x021d4000 0x4000>;
interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SX_CLK_SAI1_IPG>,
+ <&clks IMX6SX_CLK_SAI1>,
<&clks IMX6SX_CLK_SAI1>,
<&clks 0>, <&clks 0>;
- clock-names = "bus", "mclk1", "mclk2", "mclk3";
+ clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
dma-names = "rx", "tx";
dmas = <&sdma 31 24 0>, <&sdma 32 24 0>;
status = "disabled";
@@ -1090,9 +1091,10 @@
reg = <0x021dc000 0x4000>;
interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SX_CLK_SAI2_IPG>,
+ <&clks IMX6SX_CLK_SAI2>,
<&clks IMX6SX_CLK_SAI2>,
<&clks 0>, <&clks 0>;
- clock-names = "bus", "mclk1", "mclk2", "mclk3";
+ clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
dma-names = "rx", "tx";
dmas = <&sdma 33 24 0>, <&sdma 34 24 0>;
status = "disabled";
diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi
index bbf010c73336..e9691306f557 100644
--- a/arch/arm/boot/dts/imx6ul.dtsi
+++ b/arch/arm/boot/dts/imx6ul.dtsi
@@ -304,9 +304,10 @@
reg = <0x02028000 0x4000>;
interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6UL_CLK_SAI1_IPG>,
+ <&clks IMX6UL_CLK_SAI1>,
<&clks IMX6UL_CLK_SAI1>,
<&clks IMX6UL_CLK_DUMMY>, <&clks IMX6UL_CLK_DUMMY>;
- clock-names = "bus", "mclk1", "mclk2", "mclk3";
+ clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
dmas = <&sdma 35 24 0>,
<&sdma 36 24 0>;
dma-names = "rx", "tx";
@@ -319,9 +320,10 @@
reg = <0x0202c000 0x4000>;
interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6UL_CLK_SAI2_IPG>,
+ <&clks IMX6UL_CLK_SAI2>,
<&clks IMX6UL_CLK_SAI2>,
<&clks IMX6UL_CLK_DUMMY>, <&clks IMX6UL_CLK_DUMMY>;
- clock-names = "bus", "mclk1", "mclk2", "mclk3";
+ clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
dmas = <&sdma 37 24 0>,
<&sdma 38 24 0>;
dma-names = "rx", "tx";
@@ -334,9 +336,10 @@
reg = <0x02030000 0x4000>;
interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6UL_CLK_SAI3_IPG>,
+ <&clks IMX6UL_CLK_SAI3>,
<&clks IMX6UL_CLK_SAI3>,
<&clks IMX6UL_CLK_DUMMY>, <&clks IMX6UL_CLK_DUMMY>;
- clock-names = "bus", "mclk1", "mclk2", "mclk3";
+ clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
dmas = <&sdma 39 24 0>,
<&sdma 40 24 0>;
dma-names = "rx", "tx";
diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi
index 106711d2c01b..c345a2e6d824 100644
--- a/arch/arm/boot/dts/imx7s.dtsi
+++ b/arch/arm/boot/dts/imx7s.dtsi
@@ -886,10 +886,11 @@
reg = <0x308a0000 0x10000>;
interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX7D_SAI1_IPG_CLK>,
+ <&clks IMX7D_SAI1_ROOT_CLK>,
<&clks IMX7D_SAI1_ROOT_CLK>,
<&clks IMX7D_CLK_DUMMY>,
<&clks IMX7D_CLK_DUMMY>;
- clock-names = "bus", "mclk1", "mclk2", "mclk3";
+ clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
dma-names = "rx", "tx";
dmas = <&sdma 8 24 0>, <&sdma 9 24 0>;
status = "disabled";
@@ -901,10 +902,11 @@
reg = <0x308b0000 0x10000>;
interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX7D_SAI2_IPG_CLK>,
+ <&clks IMX7D_SAI2_ROOT_CLK>,
<&clks IMX7D_SAI2_ROOT_CLK>,
<&clks IMX7D_CLK_DUMMY>,
<&clks IMX7D_CLK_DUMMY>;
- clock-names = "bus", "mclk1", "mclk2", "mclk3";
+ clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
dma-names = "rx", "tx";
dmas = <&sdma 10 24 0>, <&sdma 11 24 0>;
status = "disabled";
@@ -916,10 +918,11 @@
reg = <0x308c0000 0x10000>;
interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX7D_SAI3_IPG_CLK>,
+ <&clks IMX7D_SAI3_ROOT_CLK>,
<&clks IMX7D_SAI3_ROOT_CLK>,
<&clks IMX7D_CLK_DUMMY>,
<&clks IMX7D_CLK_DUMMY>;
- clock-names = "bus", "mclk1", "mclk2", "mclk3";
+ clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
dma-names = "rx", "tx";
dmas = <&sdma 12 24 0>, <&sdma 13 24 0>;
status = "disabled";
--
2.17.1
next prev parent reply other threads:[~2019-05-28 13:21 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-05-28 13:20 [PATCH 0/3] Add mclk0 clock source for SAI Daniel Baluta
2019-05-28 13:21 ` Daniel Baluta [this message]
2019-05-29 22:57 ` [PATCH 1/3] ARM: dts: imx: Add mclk0 clock " Nicolin Chen
2019-05-28 13:21 ` [PATCH 2/3] dt-bindings: sound: Clarify the usage of clocks in SAI Daniel Baluta
2019-06-14 20:00 ` Rob Herring
2019-05-28 13:21 ` [PATCH 3/3] ASoC: fsl_sai: Read SAI clock source 0 from DT Daniel Baluta
2019-05-29 23:03 ` [PATCH 0/3] Add mclk0 clock source for SAI Nicolin Chen
2019-05-30 8:32 ` Daniel Baluta
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190528132034.3908-2-daniel.baluta@nxp.com \
--to=daniel.baluta@nxp.com \
--cc=Xiubo.Lee@gmail.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=kernel@pengutronix.de \
--cc=lgirdwood@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=nicoleotsuka@gmail.com \
--cc=robh+dt@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
--cc=shengjiu.wang@nxp.com \
--cc=timur@kernel.org \
--cc=tiwai@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).