From: Robert Richter <rrichter@marvell.com>
To: Borislav Petkov <bp@alien8.de>, Tony Luck <tony.luck@intel.com>,
"James Morse" <james.morse@arm.com>,
Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: "linux-edac@vger.kernel.org" <linux-edac@vger.kernel.org>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
Robert Richter <rrichter@marvell.com>
Subject: [PATCH 17/21] EDAC, ghes: Fill sysfs with the DMI DIMM label information
Date: Wed, 29 May 2019 08:44:41 +0000 [thread overview]
Message-ID: <20190529084344.28562-18-rrichter@marvell.com> (raw)
In-Reply-To: <20190529084344.28562-1-rrichter@marvell.com>
This patch extracts the DIMM label from the DMI table and puts this
information into sysfs. E.g. on a ThunderX2 system we found this now:
# grep . /sys/devices/system/edac/mc/mc*/dimm*/dimm_label
/sys/devices/system/edac/mc/mc0/dimm0/dimm_label:N0 DIMM_A0
/sys/devices/system/edac/mc/mc0/dimm1/dimm_label:N0 DIMM_B0
/sys/devices/system/edac/mc/mc0/dimm2/dimm_label:N0 DIMM_C0
/sys/devices/system/edac/mc/mc0/dimm3/dimm_label:N0 DIMM_D0
/sys/devices/system/edac/mc/mc0/dimm4/dimm_label:N0 DIMM_E0
/sys/devices/system/edac/mc/mc0/dimm5/dimm_label:N0 DIMM_F0
/sys/devices/system/edac/mc/mc0/dimm6/dimm_label:N0 DIMM_G0
/sys/devices/system/edac/mc/mc0/dimm7/dimm_label:N0 DIMM_H0
/sys/devices/system/edac/mc/mc1/dimm0/dimm_label:N1 DIMM_I0
/sys/devices/system/edac/mc/mc1/dimm1/dimm_label:N1 DIMM_J0
/sys/devices/system/edac/mc/mc1/dimm2/dimm_label:N1 DIMM_K0
/sys/devices/system/edac/mc/mc1/dimm3/dimm_label:N1 DIMM_L0
/sys/devices/system/edac/mc/mc1/dimm4/dimm_label:N1 DIMM_M0
/sys/devices/system/edac/mc/mc1/dimm5/dimm_label:N1 DIMM_N0
/sys/devices/system/edac/mc/mc1/dimm6/dimm_label:N1 DIMM_O0
/sys/devices/system/edac/mc/mc1/dimm7/dimm_label:N1 DIMM_P0
Signed-off-by: Robert Richter <rrichter@marvell.com>
---
drivers/edac/ghes_edac.c | 26 ++++++++++++++++++++------
1 file changed, 20 insertions(+), 6 deletions(-)
diff --git a/drivers/edac/ghes_edac.c b/drivers/edac/ghes_edac.c
index e5fa977bcfd9..b8878ff498d1 100644
--- a/drivers/edac/ghes_edac.c
+++ b/drivers/edac/ghes_edac.c
@@ -254,10 +254,6 @@ static void ghes_edac_dmidecode(const struct dmi_header *dh, void *arg)
dimm->dtype = DEV_UNKNOWN;
dimm->grain = 128; /* Likely, worse case */
- /*
- * FIXME: It shouldn't be hard to also fill the DIMM labels
- */
-
if (dimm->nr_pages) {
edac_dbg(1, "DIMM%i: %s size = %d MB%s\n",
mi->idx, edac_mem_types[dimm->mtype],
@@ -293,6 +289,7 @@ static int mem_info_setup(void)
{
struct ghes_dimm_info *dimm;
bool enable_numa = true;
+ const char *bank, *device;
int idx = 0;
memset(&mem_info, 0, sizeof(mem_info));
@@ -312,6 +309,17 @@ static int mem_info_setup(void)
dmi_walk(ghes_edac_set_nid, NULL);
for_each_dimm(dimm) {
+ bank = device = NULL;
+ dmi_memdev_name(dimm->dimm_info.smbios_handle,
+ &bank, &device);
+ if (bank && device) {
+ snprintf(dimm->dimm_info.label,
+ sizeof(dimm->dimm_info.label),
+ "%s %s", bank, device);
+ } else {
+ *dimm->dimm_info.label = '\0';
+ }
+
if (dimm->numa_node == NUMA_NO_NODE) {
enable_numa = false;
} else {
@@ -320,8 +328,11 @@ static int mem_info_setup(void)
mem_info.num_per_node[dimm->numa_node]++;
}
- edac_dbg(1, "DIMM%i: Found mem range [%pa-%pa] on node %d\n",
- dimm->idx, &dimm->start, &dimm->end, dimm->numa_node);
+ edac_dbg(1, "DIMM%i: Found mem range [%pa-%pa] on node %d, handle: 0x%.4x%s%s\n",
+ dimm->idx, &dimm->start, &dimm->end, dimm->numa_node,
+ dimm->dimm_info.smbios_handle,
+ *dimm->dimm_info.label ? ", label: " : "",
+ dimm->dimm_info.label);
}
mem_info.enable_numa = enable_numa;
@@ -387,6 +398,9 @@ static void mci_add_dimm_info(struct mem_ctl_info *mci)
mci_dimm->dtype = dmi_dimm->dtype;
mci_dimm->grain = dmi_dimm->grain;
mci_dimm->smbios_handle = dmi_dimm->smbios_handle;
+
+ if (*dmi_dimm->label)
+ strcpy(mci_dimm->label, dmi_dimm->label);
}
if (index != mci->tot_dimms)
--
2.20.1
next prev parent reply other threads:[~2019-05-29 8:45 UTC|newest]
Thread overview: 43+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-05-29 8:44 [PATCH 00/21] EDAC, mc, ghes: Fixes and updates to improve memory error reporting Robert Richter
2019-05-29 8:44 ` [PATCH 01/21] EDAC, mc: Fix edac_mc_find() in case no device is found Robert Richter
2019-05-29 8:44 ` [PATCH 02/21] EDAC: Fixes to use put_device() after device_add() errors Robert Richter
2019-06-11 17:28 ` Borislav Petkov
2019-06-12 17:17 ` Robert Richter
2019-05-29 8:44 ` [PATCH 03/21] EDAC: Kill EDAC_DIMM_PTR() macro Robert Richter
2019-05-29 8:44 ` [PATCH 04/21] EDAC: Kill EDAC_DIMM_OFF() macro Robert Richter
2019-05-29 8:44 ` [PATCH 05/21] EDAC: Introduce mci_for_each_dimm() iterator Robert Richter
2019-05-29 8:44 ` [PATCH 06/21] EDAC, mc: Cleanup _edac_mc_free() code Robert Richter
2019-05-29 8:44 ` [PATCH 07/21] EDAC, mc: Remove per layer counters Robert Richter
2019-05-29 8:44 ` [PATCH 08/21] EDAC, mc: Rework edac_raw_mc_handle_error() to use struct dimm_info Robert Richter
2019-05-29 8:44 ` [PATCH 09/21] EDAC, ghes: Use standard kernel macros for page calculations Robert Richter
2019-05-29 15:13 ` James Morse
2019-05-29 8:44 ` [PATCH 10/21] EDAC, ghes: Remove pvt->detail_location string Robert Richter
2019-05-29 15:13 ` James Morse
2019-06-12 18:13 ` Robert Richter
2019-05-29 8:44 ` [PATCH 11/21] EDAC, ghes: Unify trace_mc_event() code with edac_mc driver Robert Richter
2019-05-29 15:12 ` James Morse
2019-06-03 13:10 ` Robert Richter
2019-06-04 17:15 ` James Morse
2019-06-13 22:23 ` Robert Richter
2019-05-29 8:44 ` [PATCH 12/21] EDAC, ghes: Add support for legacy API counters Robert Richter
2019-05-29 15:13 ` James Morse
2019-06-12 18:41 ` Robert Richter
2019-06-19 17:22 ` James Morse
2019-06-20 6:55 ` Robert Richter
2019-06-26 9:33 ` James Morse
2019-06-26 10:27 ` Robert Richter
2019-05-29 8:44 ` [PATCH 13/21] EDAC, ghes: Rework memory hierarchy detection Robert Richter
2019-05-29 15:06 ` James Morse
2019-05-31 13:41 ` Robert Richter
2019-05-29 8:44 ` [PATCH 14/21] EDAC, ghes: Extract numa node information for each dimm Robert Richter
2019-05-29 17:51 ` James Morse
2019-06-13 20:52 ` Robert Richter
2019-05-29 8:44 ` [PATCH 15/21] EDAC, ghes: Moving code around ghes_edac_register() Robert Richter
2019-05-29 8:44 ` [PATCH 16/21] EDAC, ghes: Create one memory controller device per node Robert Richter
2019-05-29 8:44 ` Robert Richter [this message]
2019-05-29 8:44 ` [PATCH 18/21] EDAC, mc: Introduce edac_mc_alloc_by_dimm() for per dimm allocation Robert Richter
2019-05-29 8:44 ` [PATCH 19/21] EDAC, ghes: Identify dimm by node, card, module and handle Robert Richter
2019-05-29 8:44 ` [PATCH 20/21] EDAC, ghes: Enable per-layer reporting based on card/module Robert Richter
2019-05-29 8:44 ` [PATCH 21/21] EDAC, Documentation: Describe CPER module definition and DIMM ranks Robert Richter
2019-05-29 14:54 ` [PATCH 00/21] EDAC, mc, ghes: Fixes and updates to improve memory error reporting Borislav Petkov
2019-05-31 14:48 ` Robert Richter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190529084344.28562-18-rrichter@marvell.com \
--to=rrichter@marvell.com \
--cc=bp@alien8.de \
--cc=james.morse@arm.com \
--cc=linux-edac@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=tony.luck@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).