linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Jagan Teki <jagan@amarulasolutions.com>
To: Maxime Ripard <maxime.ripard@bootlin.com>,
	David Airlie <airlied@linux.ie>, Daniel Vetter <daniel@ffwll.ch>,
	Chen-Yu Tsai <wens@csie.org>,
	dri-devel@lists.freedesktop.org,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org
Cc: Michael Trimarchi <michael@amarulasolutions.com>,
	devicetree@vger.kernel.org, linux-sunxi@googlegroups.com,
	linux-amarula@amarulasolutions.com,
	Sergey Suloev <ssuloev@orpaltech.com>,
	Ryan Pannell <ryan@osukl.com>,
	bshah@mykolab.com, Jagan Teki <jagan@amarulasolutions.com>
Subject: [PATCH v9 6/9] arm64: dts: allwinner: a64-amarula-relic: Add Techstar TS8550B MIPI-DSI panel
Date: Wed, 29 May 2019 16:26:12 +0530	[thread overview]
Message-ID: <20190529105615.14027-7-jagan@amarulasolutions.com> (raw)
In-Reply-To: <20190529105615.14027-1-jagan@amarulasolutions.com>

Amarula A64-Relic board by default bound with Techstar TS8550B
MIPI-DSI panel, add support for it.

DSI panel connected via board DSI port with,
- DLDO1 as VCC-DSI supply
- DLDO2 as VCC supply
- DLDO2 as IOVCC supply
- PD24 gpio for reset pin
- PD23 gpio for backlight enable pin

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
 .../allwinner/sun50i-a64-amarula-relic.dts    | 35 +++++++++++++++++++
 1 file changed, 35 insertions(+)

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-amarula-relic.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-amarula-relic.dts
index 5634245d11db..5109c3258a2f 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-amarula-relic.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-amarula-relic.dts
@@ -9,6 +9,7 @@
 #include "sun50i-a64.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pwm/pwm.h>
 
 / {
 	model = "Amarula A64-Relic";
@@ -18,6 +19,14 @@
 		serial0 = &uart0;
 	};
 
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
+		brightness-levels = <1 2 4 8 16 32 64 128 255>;
+		default-brightness-level = <2>;
+		enable-gpios = <&pio 3 23 GPIO_ACTIVE_HIGH>; /* LCD-BL-EN: PD23 */
+	};
+
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
@@ -80,6 +89,28 @@
 	};
 };
 
+&de {
+	status = "okay";
+};
+
+&dphy {
+	status = "okay";
+};
+
+&dsi {
+	vcc-dsi-supply = <&reg_dldo1>;		/* VCC-DSI */
+	status = "okay";
+
+	panel@0 {
+		compatible = "techstar,ts8550b", "sitronix,st7701";
+		reg = <0>;
+		VCC-supply = <&reg_dldo2>;	/* VCC-MIPI */
+		IOVCC-supply = <&reg_dldo2>;	/* VCC-MIPI */
+		reset-gpios = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* LCD-RST: PD24 */
+		backlight = <&backlight>;
+	};
+};
+
 &ehci0 {
 	status = "okay";
 };
@@ -151,6 +182,10 @@
 	status = "okay";
 };
 
+&pwm {
+	status = "okay";
+};
+
 &r_rsb {
 	status = "okay";
 
-- 
2.18.0.321.gffc6fa0e3


  parent reply	other threads:[~2019-05-29 10:57 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-05-29 10:56 [PATCH v9 0/9] drm/sun4i: Allwinner A64 MIPI-DSI support Jagan Teki
2019-05-29 10:56 ` [PATCH v9 1/9] dt-bindings: sun6i-dsi: Add A64 MIPI-DSI compatible Jagan Teki
2019-05-31  6:59   ` Maxime Ripard
2019-05-31  7:21     ` Jagan Teki
2019-05-29 10:56 ` [PATCH v9 2/9] dt-bindings: sun6i-dsi: Add A64 DPHY compatible (w/ A31 fallback) Jagan Teki
2019-05-31  7:00   ` Maxime Ripard
2019-05-29 10:56 ` [PATCH v9 3/9] drm/sun4i: dsi: Add has_mod_clk quirk Jagan Teki
2019-05-29 10:56 ` [PATCH v9 4/9] drm/sun4i: dsi: Add Allwinner A64 MIPI DSI support Jagan Teki
2019-05-29 10:56 ` [PATCH v9 5/9] arm64: dts: allwinner: a64: Add MIPI DSI pipeline Jagan Teki
2019-05-29 10:56 ` Jagan Teki [this message]
2019-05-29 10:56 ` [DO NOT MERGE] [PATCH v9 7/9] arm64: dts: allwinner: bananapi-m64: Enable Bananapi S070WV20-CT16 DSI panel Jagan Teki
2019-05-29 10:56 ` [DO NOT MERGE] [PATCH v9 8/9] arm64: dts: allwinner: a64-pine64-lts: Enable Feiyang FY07024DI26A30-D " Jagan Teki
2019-05-29 10:56 ` [DO NOT MERGE] [PATCH v9 9/9] arm64: dts: allwinner: oceanic-5205-5inmfd: Enable Microtech MTF050FHDI-03 panel Jagan Teki
2019-05-31  6:58 ` [PATCH v9 0/9] drm/sun4i: Allwinner A64 MIPI-DSI support Maxime Ripard
2019-05-31  7:25   ` Jagan Teki

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190529105615.14027-7-jagan@amarulasolutions.com \
    --to=jagan@amarulasolutions.com \
    --cc=airlied@linux.ie \
    --cc=bshah@mykolab.com \
    --cc=daniel@ffwll.ch \
    --cc=devicetree@vger.kernel.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=linux-amarula@amarulasolutions.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-sunxi@googlegroups.com \
    --cc=maxime.ripard@bootlin.com \
    --cc=michael@amarulasolutions.com \
    --cc=ryan@osukl.com \
    --cc=ssuloev@orpaltech.com \
    --cc=wens@csie.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).