From: Alexey Dobriyan <adobriyan@gmail.com>
To: akpm@linux-foundation.org
Cc: linux-kernel@vger.kernel.org
Subject: [PATCH 2/2] proc: use typeof_member() macro
Date: Wed, 29 May 2019 22:11:10 +0300 [thread overview]
Message-ID: <20190529191110.GB5703@avx2> (raw)
In-Reply-To: <20190529190720.GA5703@avx2>
Don't repeat function signatures twice.
This is a kind-of-precursor for "struct proc_ops".
Note:
typeof(pde->proc_fops->...) ...;
can't be used because ->proc_fops is "const struct file_operations *".
"const" prevents assignment down the code and it can't be deleted
in the type system.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
---
Note 2: 100% false positives with checkpatch.pl :^)
fs/proc/inode.c | 27 +++++++++++++++++----------
1 file changed, 17 insertions(+), 10 deletions(-)
--- a/fs/proc/inode.c
+++ b/fs/proc/inode.c
@@ -200,7 +200,8 @@ static loff_t proc_reg_llseek(struct file *file, loff_t offset, int whence)
struct proc_dir_entry *pde = PDE(file_inode(file));
loff_t rv = -EINVAL;
if (use_pde(pde)) {
- loff_t (*llseek)(struct file *, loff_t, int);
+ typeof_member(struct file_operations, llseek) llseek;
+
llseek = pde->proc_fops->llseek;
if (!llseek)
llseek = default_llseek;
@@ -212,10 +213,11 @@ static loff_t proc_reg_llseek(struct file *file, loff_t offset, int whence)
static ssize_t proc_reg_read(struct file *file, char __user *buf, size_t count, loff_t *ppos)
{
- ssize_t (*read)(struct file *, char __user *, size_t, loff_t *);
struct proc_dir_entry *pde = PDE(file_inode(file));
ssize_t rv = -EIO;
if (use_pde(pde)) {
+ typeof_member(struct file_operations, read) read;
+
read = pde->proc_fops->read;
if (read)
rv = read(file, buf, count, ppos);
@@ -226,10 +228,11 @@ static ssize_t proc_reg_read(struct file *file, char __user *buf, size_t count,
static ssize_t proc_reg_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos)
{
- ssize_t (*write)(struct file *, const char __user *, size_t, loff_t *);
struct proc_dir_entry *pde = PDE(file_inode(file));
ssize_t rv = -EIO;
if (use_pde(pde)) {
+ typeof_member(struct file_operations, write) write;
+
write = pde->proc_fops->write;
if (write)
rv = write(file, buf, count, ppos);
@@ -242,8 +245,9 @@ static __poll_t proc_reg_poll(struct file *file, struct poll_table_struct *pts)
{
struct proc_dir_entry *pde = PDE(file_inode(file));
__poll_t rv = DEFAULT_POLLMASK;
- __poll_t (*poll)(struct file *, struct poll_table_struct *);
if (use_pde(pde)) {
+ typeof_member(struct file_operations, poll) poll;
+
poll = pde->proc_fops->poll;
if (poll)
rv = poll(file, pts);
@@ -256,8 +260,9 @@ static long proc_reg_unlocked_ioctl(struct file *file, unsigned int cmd, unsigne
{
struct proc_dir_entry *pde = PDE(file_inode(file));
long rv = -ENOTTY;
- long (*ioctl)(struct file *, unsigned int, unsigned long);
if (use_pde(pde)) {
+ typeof_member(struct file_operations, unlocked_ioctl) ioctl;
+
ioctl = pde->proc_fops->unlocked_ioctl;
if (ioctl)
rv = ioctl(file, cmd, arg);
@@ -271,8 +276,9 @@ static long proc_reg_compat_ioctl(struct file *file, unsigned int cmd, unsigned
{
struct proc_dir_entry *pde = PDE(file_inode(file));
long rv = -ENOTTY;
- long (*compat_ioctl)(struct file *, unsigned int, unsigned long);
if (use_pde(pde)) {
+ typeof_member(struct file_operations, compat_ioctl) compat_ioctl;
+
compat_ioctl = pde->proc_fops->compat_ioctl;
if (compat_ioctl)
rv = compat_ioctl(file, cmd, arg);
@@ -286,8 +292,9 @@ static int proc_reg_mmap(struct file *file, struct vm_area_struct *vma)
{
struct proc_dir_entry *pde = PDE(file_inode(file));
int rv = -EIO;
- int (*mmap)(struct file *, struct vm_area_struct *);
if (use_pde(pde)) {
+ typeof_member(struct file_operations, mmap) mmap;
+
mmap = pde->proc_fops->mmap;
if (mmap)
rv = mmap(file, vma);
@@ -305,7 +312,7 @@ proc_reg_get_unmapped_area(struct file *file, unsigned long orig_addr,
unsigned long rv = -EIO;
if (use_pde(pde)) {
- typeof(proc_reg_get_unmapped_area) *get_area;
+ typeof_member(struct file_operations, get_unmapped_area) get_area;
get_area = pde->proc_fops->get_unmapped_area;
#ifdef CONFIG_MMU
@@ -326,8 +333,8 @@ static int proc_reg_open(struct inode *inode, struct file *file)
{
struct proc_dir_entry *pde = PDE(inode);
int rv = 0;
- int (*open)(struct inode *, struct file *);
- int (*release)(struct inode *, struct file *);
+ typeof_member(struct file_operations, open) open;
+ typeof_member(struct file_operations, release) release;
struct pde_opener *pdeo;
/*
next prev parent reply other threads:[~2019-05-29 19:11 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-05-29 19:07 [PATCH 1/2] add typeof_member() macro Alexey Dobriyan
2019-05-29 19:11 ` Alexey Dobriyan [this message]
2019-05-29 22:33 ` [PATCH 2/2] proc: use " Andrew Morton
2019-05-30 11:37 ` [PATCH 1/2] add " David Laight
2019-05-30 11:53 ` Joe Perches
2019-05-30 19:57 ` Alexey Dobriyan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190529191110.GB5703@avx2 \
--to=adobriyan@gmail.com \
--cc=akpm@linux-foundation.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).