[RFC,2/2] crypto: mxs-dcp: Implement reference keys
diff mbox series

Message ID 20190529224844.25203-2-richard@nod.at
State New
Headers show
Series
  • [RFC,1/2] crypto: Allow working with key references
Related show

Commit Message

Richard Weinberger May 29, 2019, 10:48 p.m. UTC
DCP allows working with secure keys. These keys can reside in a
protected memory region of the crypto accelerator, burned in
eFuses or being an internal chip key. To use these keys a key
reference is transferred to the chip instead of a AES key.
For DCP these references can be:
0x00 to 0x03: Key slot number in the secure memory region
0xfe: Unique device key
0xff: OTP key (burned in eFuse)

To utilize this functionality we check for the
CRYPTO_TFM_REQ_REF_KEY flag, if it is set the key as provided
via mxs_dcp_aes_setkey() is used as reference.

Signed-off-by: Richard Weinberger <richard@nod.at>
---
 drivers/crypto/mxs-dcp.c | 77 +++++++++++++++++++++++++++++++++++++++---------
 1 file changed, 63 insertions(+), 14 deletions(-)

Patch
diff mbox series

diff --git a/drivers/crypto/mxs-dcp.c b/drivers/crypto/mxs-dcp.c
index b4429891e368..22b048a3a91b 100644
--- a/drivers/crypto/mxs-dcp.c
+++ b/drivers/crypto/mxs-dcp.c
@@ -147,6 +147,10 @@  static struct dcp *global_sdcp;
 
 #define MXS_DCP_CONTEXT				0x50
 
+#define MXS_DCP_KEY				0x60
+#define MXS_DCP_KEY_IDX(id, word)		(((id) << 4) | (word))
+#define MXS_DCP_KEYDATA				0x70
+
 #define MXS_DCP_CH_N_CMDPTR(n)			(0x100 + ((n) * 0x40))
 
 #define MXS_DCP_CH_N_SEMA(n)			(0x110 + ((n) * 0x40))
@@ -158,6 +162,7 @@  static struct dcp *global_sdcp;
 #define MXS_DCP_CONTROL0_HASH_TERM		(1 << 13)
 #define MXS_DCP_CONTROL0_HASH_INIT		(1 << 12)
 #define MXS_DCP_CONTROL0_PAYLOAD_KEY		(1 << 11)
+#define MXS_DCP_CONTROL0_OTP_KEY		(1 << 10)
 #define MXS_DCP_CONTROL0_CIPHER_ENCRYPT		(1 << 8)
 #define MXS_DCP_CONTROL0_CIPHER_INIT		(1 << 9)
 #define MXS_DCP_CONTROL0_ENABLE_HASH		(1 << 6)
@@ -222,15 +227,22 @@  static int mxs_dcp_run_aes(struct dcp_async_ctx *actx,
 	struct dcp *sdcp = global_sdcp;
 	struct dcp_dma_desc *desc = &sdcp->coh->desc[actx->chan];
 	struct dcp_aes_req_ctx *rctx = ablkcipher_request_ctx(req);
+	struct crypto_async_request *arq = &req->base;
+	bool key_referenced = !!(crypto_tfm_get_flags(arq->tfm) &
+				 CRYPTO_TFM_REQ_REF_KEY);
+	dma_addr_t src_phys, dst_phys, key_phys = {0};
 	int ret;
 
-	dma_addr_t key_phys = dma_map_single(sdcp->dev, sdcp->coh->aes_key,
-					     2 * AES_KEYSIZE_128,
-					     DMA_TO_DEVICE);
-	dma_addr_t src_phys = dma_map_single(sdcp->dev, sdcp->coh->aes_in_buf,
-					     DCP_BUF_SZ, DMA_TO_DEVICE);
-	dma_addr_t dst_phys = dma_map_single(sdcp->dev, sdcp->coh->aes_out_buf,
-					     DCP_BUF_SZ, DMA_FROM_DEVICE);
+	if (!key_referenced) {
+		key_phys = dma_map_single(sdcp->dev, sdcp->coh->aes_key,
+						     2 * AES_KEYSIZE_128,
+						     DMA_TO_DEVICE);
+	}
+
+	src_phys = dma_map_single(sdcp->dev, sdcp->coh->aes_in_buf,
+				  DCP_BUF_SZ, DMA_TO_DEVICE);
+	dst_phys = dma_map_single(sdcp->dev, sdcp->coh->aes_out_buf,
+				  DCP_BUF_SZ, DMA_FROM_DEVICE);
 
 	if (actx->fill % AES_BLOCK_SIZE) {
 		dev_err(sdcp->dev, "Invalid block size!\n");
@@ -243,8 +255,12 @@  static int mxs_dcp_run_aes(struct dcp_async_ctx *actx,
 		    MXS_DCP_CONTROL0_INTERRUPT |
 		    MXS_DCP_CONTROL0_ENABLE_CIPHER;
 
-	/* Payload contains the key. */
-	desc->control0 |= MXS_DCP_CONTROL0_PAYLOAD_KEY;
+	if (key_referenced) {
+		desc->control0 |= MXS_DCP_CONTROL0_OTP_KEY;
+	} else {
+		/* Payload contains the key. */
+		desc->control0 |= MXS_DCP_CONTROL0_PAYLOAD_KEY;
+	}
 
 	if (rctx->enc)
 		desc->control0 |= MXS_DCP_CONTROL0_CIPHER_ENCRYPT;
@@ -258,18 +274,26 @@  static int mxs_dcp_run_aes(struct dcp_async_ctx *actx,
 	else
 		desc->control1 |= MXS_DCP_CONTROL1_CIPHER_MODE_CBC;
 
+	if (key_referenced)
+		desc->control1 |= sdcp->coh->aes_key[0] << 8;
+
 	desc->next_cmd_addr = 0;
 	desc->source = src_phys;
 	desc->destination = dst_phys;
 	desc->size = actx->fill;
-	desc->payload = key_phys;
+	if (key_referenced)
+		desc->payload = 0;
+	else
+		desc->payload = key_phys;
 	desc->status = 0;
 
 	ret = mxs_dcp_start_dma(actx);
 
 aes_done_run:
-	dma_unmap_single(sdcp->dev, key_phys, 2 * AES_KEYSIZE_128,
-			 DMA_TO_DEVICE);
+	if (!key_referenced) {
+		dma_unmap_single(sdcp->dev, key_phys, 2 * AES_KEYSIZE_128,
+				 DMA_TO_DEVICE);
+	}
 	dma_unmap_single(sdcp->dev, src_phys, DCP_BUF_SZ, DMA_TO_DEVICE);
 	dma_unmap_single(sdcp->dev, dst_phys, DCP_BUF_SZ, DMA_FROM_DEVICE);
 
@@ -498,15 +522,40 @@  static int mxs_dcp_aes_setkey(struct crypto_ablkcipher *tfm, const u8 *key,
 			      unsigned int len)
 {
 	struct dcp_async_ctx *actx = crypto_ablkcipher_ctx(tfm);
+	bool key_referenced = !!(crypto_ablkcipher_get_flags(tfm) &
+				 CRYPTO_TFM_REQ_REF_KEY);
 	unsigned int ret;
 
 	/*
-	 * AES 128 is supposed by the hardware, store key into temporary
+	 * AES 128 is supported by the hardware, store key into temporary
 	 * buffer and exit. We must use the temporary buffer here, since
 	 * there can still be an operation in progress.
 	 */
 	actx->key_len = len;
-	if (len == AES_KEYSIZE_128) {
+
+	if (key_referenced) {
+		/*
+		 * If a hardware key is used, no software fallback is possible.
+		 */
+		if (len != AES_KEYSIZE_128)
+			return -EINVAL;
+
+		/*
+		 * DCP supports the following key slots.
+		 */
+		switch (key[0]) {
+		case 0x00:
+		case 0x01:
+		case 0x02:
+		case 0x03:
+		case 0xfe:
+		case 0xff:
+			memcpy(actx->key, key, len);
+			return 0;
+		default:
+			return -EINVAL;
+		}
+	} else if (len == AES_KEYSIZE_128) {
 		memcpy(actx->key, key, len);
 		return 0;
 	}