[v2,1/2] hwmon: pmbus: Add Infineon PXE1610 VR driver
diff mbox series

Message ID 20190530231159.222188-1-vijaykhemka@fb.com
State New
Headers show
Series
  • [v2,1/2] hwmon: pmbus: Add Infineon PXE1610 VR driver
Related show

Commit Message

Vijay Khemka May 30, 2019, 11:11 p.m. UTC
Added pmbus driver for the new device Infineon pxe1610
voltage regulator. It also supports similar family device
PXE1110 and PXM1310.

Signed-off-by: Vijay Khemka <vijaykhemka@fb.com>
---
Changes in v2:
incorporated all the feedback from Guenter Roeck <linux@roeck-us.net>

 drivers/hwmon/pmbus/Kconfig   |   9 +++
 drivers/hwmon/pmbus/Makefile  |   1 +
 drivers/hwmon/pmbus/pxe1610.c | 139 ++++++++++++++++++++++++++++++++++
 3 files changed, 149 insertions(+)
 create mode 100644 drivers/hwmon/pmbus/pxe1610.c

Comments

Guenter Roeck June 5, 2019, 8:46 p.m. UTC | #1
On Thu, May 30, 2019 at 04:11:56PM -0700, Vijay Khemka wrote:
> Added pmbus driver for the new device Infineon pxe1610
> voltage regulator. It also supports similar family device
> PXE1110 and PXM1310.
> 
> Signed-off-by: Vijay Khemka <vijaykhemka@fb.com>

Applied.

Thanks,
Guenter

> ---
> Changes in v2:
> incorporated all the feedback from Guenter Roeck <linux@roeck-us.net>
> 
>  drivers/hwmon/pmbus/Kconfig   |   9 +++
>  drivers/hwmon/pmbus/Makefile  |   1 +
>  drivers/hwmon/pmbus/pxe1610.c | 139 ++++++++++++++++++++++++++++++++++
>  3 files changed, 149 insertions(+)
>  create mode 100644 drivers/hwmon/pmbus/pxe1610.c
> 
> diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig
> index 30751eb9550a..338ef9b5a395 100644
> --- a/drivers/hwmon/pmbus/Kconfig
> +++ b/drivers/hwmon/pmbus/Kconfig
> @@ -154,6 +154,15 @@ config SENSORS_MAX8688
>  	  This driver can also be built as a module. If so, the module will
>  	  be called max8688.
>  
> +config SENSORS_PXE1610
> +	tristate "Infineon PXE1610"
> +	help
> +	  If you say yes here you get hardware monitoring support for Infineon
> +	  PXE1610.
> +
> +	  This driver can also be built as a module. If so, the module will
> +	  be called pxe1610.
> +
>  config SENSORS_TPS40422
>  	tristate "TI TPS40422"
>  	help
> diff --git a/drivers/hwmon/pmbus/Makefile b/drivers/hwmon/pmbus/Makefile
> index 2219b9300316..b0fbd017a91a 100644
> --- a/drivers/hwmon/pmbus/Makefile
> +++ b/drivers/hwmon/pmbus/Makefile
> @@ -18,6 +18,7 @@ obj-$(CONFIG_SENSORS_MAX20751)	+= max20751.o
>  obj-$(CONFIG_SENSORS_MAX31785)	+= max31785.o
>  obj-$(CONFIG_SENSORS_MAX34440)	+= max34440.o
>  obj-$(CONFIG_SENSORS_MAX8688)	+= max8688.o
> +obj-$(CONFIG_SENSORS_PXE1610)	+= pxe1610.o
>  obj-$(CONFIG_SENSORS_TPS40422)	+= tps40422.o
>  obj-$(CONFIG_SENSORS_TPS53679)	+= tps53679.o
>  obj-$(CONFIG_SENSORS_UCD9000)	+= ucd9000.o
> diff --git a/drivers/hwmon/pmbus/pxe1610.c b/drivers/hwmon/pmbus/pxe1610.c
> new file mode 100644
> index 000000000000..ebe3f023f840
> --- /dev/null
> +++ b/drivers/hwmon/pmbus/pxe1610.c
> @@ -0,0 +1,139 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Hardware monitoring driver for Infineon PXE1610
> + *
> + * Copyright (c) 2019 Facebook Inc
> + *
> + */
> +
> +#include <linux/err.h>
> +#include <linux/i2c.h>
> +#include <linux/init.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include "pmbus.h"
> +
> +#define PXE1610_NUM_PAGES 3
> +
> +/* Identify chip parameters. */
> +static int pxe1610_identify(struct i2c_client *client,
> +			     struct pmbus_driver_info *info)
> +{
> +	if (pmbus_check_byte_register(client, 0, PMBUS_VOUT_MODE)) {
> +		u8 vout_mode;
> +		int ret;
> +
> +		/* Read the register with VOUT scaling value.*/
> +		ret = pmbus_read_byte_data(client, 0, PMBUS_VOUT_MODE);
> +		if (ret < 0)
> +			return ret;
> +
> +		vout_mode = ret & GENMASK(4, 0);
> +
> +		switch (vout_mode) {
> +		case 1:
> +			info->vrm_version = vr12;
> +			break;
> +		case 2:
> +			info->vrm_version = vr13;
> +			break;
> +		default:
> +			return -ENODEV;
> +		}
> +	}
> +
> +	return 0;
> +}
> +
> +static struct pmbus_driver_info pxe1610_info = {
> +	.pages = PXE1610_NUM_PAGES,
> +	.format[PSC_VOLTAGE_IN] = linear,
> +	.format[PSC_VOLTAGE_OUT] = vid,
> +	.format[PSC_CURRENT_IN] = linear,
> +	.format[PSC_CURRENT_OUT] = linear,
> +	.format[PSC_TEMPERATURE] = linear,
> +	.format[PSC_POWER] = linear,
> +	.func[0] = PMBUS_HAVE_VIN
> +		| PMBUS_HAVE_VOUT | PMBUS_HAVE_IIN
> +		| PMBUS_HAVE_IOUT | PMBUS_HAVE_PIN
> +		| PMBUS_HAVE_POUT | PMBUS_HAVE_TEMP
> +		| PMBUS_HAVE_STATUS_VOUT | PMBUS_HAVE_STATUS_IOUT
> +		| PMBUS_HAVE_STATUS_INPUT | PMBUS_HAVE_STATUS_TEMP,
> +	.func[1] = PMBUS_HAVE_VIN
> +		| PMBUS_HAVE_VOUT | PMBUS_HAVE_IIN
> +		| PMBUS_HAVE_IOUT | PMBUS_HAVE_PIN
> +		| PMBUS_HAVE_POUT | PMBUS_HAVE_TEMP
> +		| PMBUS_HAVE_STATUS_VOUT | PMBUS_HAVE_STATUS_IOUT
> +		| PMBUS_HAVE_STATUS_INPUT | PMBUS_HAVE_STATUS_TEMP,
> +	.func[2] = PMBUS_HAVE_VIN
> +		| PMBUS_HAVE_VOUT | PMBUS_HAVE_IIN
> +		| PMBUS_HAVE_IOUT | PMBUS_HAVE_PIN
> +		| PMBUS_HAVE_POUT | PMBUS_HAVE_TEMP
> +		| PMBUS_HAVE_STATUS_VOUT | PMBUS_HAVE_STATUS_IOUT
> +		| PMBUS_HAVE_STATUS_INPUT | PMBUS_HAVE_STATUS_TEMP,
> +	.identify = pxe1610_identify,
> +};
> +
> +static int pxe1610_probe(struct i2c_client *client,
> +			  const struct i2c_device_id *id)
> +{
> +	struct pmbus_driver_info *info;
> +	u8 buf[I2C_SMBUS_BLOCK_MAX];
> +	int ret;
> +
> +	if (!i2c_check_functionality(
> +			client->adapter,
> +			I2C_FUNC_SMBUS_READ_BYTE_DATA
> +			| I2C_FUNC_SMBUS_READ_WORD_DATA
> +			| I2C_FUNC_SMBUS_READ_BLOCK_DATA))
> +		return -ENODEV;
> +
> +	/*
> +	 * By default this device doesn't boot to page 0, so set page 0
> +	 * to access all pmbus registers.
> +	 */
> +	i2c_smbus_write_byte_data(client, PMBUS_PAGE, 0);
> +
> +	/* Read Manufacturer id */
> +	ret = i2c_smbus_read_block_data(client, PMBUS_MFR_ID, buf);
> +	if (ret < 0) {
> +		dev_err(&client->dev, "Failed to read PMBUS_MFR_ID\n");
> +		return ret;
> +	}
> +	if (ret != 2 || strncmp(buf, "XP", 2)) {
> +		dev_err(&client->dev, "MFR_ID unrecognized\n");
> +		return -ENODEV;
> +	}
> +
> +	info = devm_kmemdup(&client->dev, &pxe1610_info,
> +			    sizeof(struct pmbus_driver_info),
> +			    GFP_KERNEL);
> +	if (!info)
> +		return -ENOMEM;
> +
> +	return pmbus_do_probe(client, id, info);
> +}
> +
> +static const struct i2c_device_id pxe1610_id[] = {
> +	{"pxe1610", 0},
> +	{"pxe1110", 0},
> +	{"pxm1310", 0},
> +	{}
> +};
> +
> +MODULE_DEVICE_TABLE(i2c, pxe1610_id);
> +
> +static struct i2c_driver pxe1610_driver = {
> +	.driver = {
> +			.name = "pxe1610",
> +			},
> +	.probe = pxe1610_probe,
> +	.remove = pmbus_do_remove,
> +	.id_table = pxe1610_id,
> +};
> +
> +module_i2c_driver(pxe1610_driver);
> +
> +MODULE_AUTHOR("Vijay Khemka <vijaykhemka@fb.com>");
> +MODULE_DESCRIPTION("PMBus driver for Infineon PXE1610, PXE1110 and PXM1310");
> +MODULE_LICENSE("GPL");
Vijay Khemka June 6, 2019, 6:49 p.m. UTC | #2
´╗┐On 6/5/19, 1:47 PM, "Guenter Roeck" <groeck7@gmail.com on behalf of linux@roeck-us.net> wrote:

    On Thu, May 30, 2019 at 04:11:56PM -0700, Vijay Khemka wrote:
    > Added pmbus driver for the new device Infineon pxe1610
    > voltage regulator. It also supports similar family device
    > PXE1110 and PXM1310.
    > 
    > Signed-off-by: Vijay Khemka <vijaykhemka@fb.com>
    
    Applied.
Thanks
    
    Thanks,
    Guenter
    
    > ---
    > Changes in v2:
    > incorporated all the feedback from Guenter Roeck <linux@roeck-us.net>
    > 
    >  drivers/hwmon/pmbus/Kconfig   |   9 +++
    >  drivers/hwmon/pmbus/Makefile  |   1 +
    >  drivers/hwmon/pmbus/pxe1610.c | 139 ++++++++++++++++++++++++++++++++++
    >  3 files changed, 149 insertions(+)
    >  create mode 100644 drivers/hwmon/pmbus/pxe1610.c
    > 
    > diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig
    > index 30751eb9550a..338ef9b5a395 100644
    > --- a/drivers/hwmon/pmbus/Kconfig
    > +++ b/drivers/hwmon/pmbus/Kconfig
    > @@ -154,6 +154,15 @@ config SENSORS_MAX8688
    >  	  This driver can also be built as a module. If so, the module will
    >  	  be called max8688.
    >  
    > +config SENSORS_PXE1610
    > +	tristate "Infineon PXE1610"
    > +	help
    > +	  If you say yes here you get hardware monitoring support for Infineon
    > +	  PXE1610.
    > +
    > +	  This driver can also be built as a module. If so, the module will
    > +	  be called pxe1610.
    > +
    >  config SENSORS_TPS40422
    >  	tristate "TI TPS40422"
    >  	help
    > diff --git a/drivers/hwmon/pmbus/Makefile b/drivers/hwmon/pmbus/Makefile
    > index 2219b9300316..b0fbd017a91a 100644
    > --- a/drivers/hwmon/pmbus/Makefile
    > +++ b/drivers/hwmon/pmbus/Makefile
    > @@ -18,6 +18,7 @@ obj-$(CONFIG_SENSORS_MAX20751)	+= max20751.o
    >  obj-$(CONFIG_SENSORS_MAX31785)	+= max31785.o
    >  obj-$(CONFIG_SENSORS_MAX34440)	+= max34440.o
    >  obj-$(CONFIG_SENSORS_MAX8688)	+= max8688.o
    > +obj-$(CONFIG_SENSORS_PXE1610)	+= pxe1610.o
    >  obj-$(CONFIG_SENSORS_TPS40422)	+= tps40422.o
    >  obj-$(CONFIG_SENSORS_TPS53679)	+= tps53679.o
    >  obj-$(CONFIG_SENSORS_UCD9000)	+= ucd9000.o
    > diff --git a/drivers/hwmon/pmbus/pxe1610.c b/drivers/hwmon/pmbus/pxe1610.c
    > new file mode 100644
    > index 000000000000..ebe3f023f840
    > --- /dev/null
    > +++ b/drivers/hwmon/pmbus/pxe1610.c
    > @@ -0,0 +1,139 @@
    > +// SPDX-License-Identifier: GPL-2.0+
    > +/*
    > + * Hardware monitoring driver for Infineon PXE1610
    > + *
    > + * Copyright (c) 2019 Facebook Inc
    > + *
    > + */
    > +
    > +#include <linux/err.h>
    > +#include <linux/i2c.h>
    > +#include <linux/init.h>
    > +#include <linux/kernel.h>
    > +#include <linux/module.h>
    > +#include "pmbus.h"
    > +
    > +#define PXE1610_NUM_PAGES 3
    > +
    > +/* Identify chip parameters. */
    > +static int pxe1610_identify(struct i2c_client *client,
    > +			     struct pmbus_driver_info *info)
    > +{
    > +	if (pmbus_check_byte_register(client, 0, PMBUS_VOUT_MODE)) {
    > +		u8 vout_mode;
    > +		int ret;
    > +
    > +		/* Read the register with VOUT scaling value.*/
    > +		ret = pmbus_read_byte_data(client, 0, PMBUS_VOUT_MODE);
    > +		if (ret < 0)
    > +			return ret;
    > +
    > +		vout_mode = ret & GENMASK(4, 0);
    > +
    > +		switch (vout_mode) {
    > +		case 1:
    > +			info->vrm_version = vr12;
    > +			break;
    > +		case 2:
    > +			info->vrm_version = vr13;
    > +			break;
    > +		default:
    > +			return -ENODEV;
    > +		}
    > +	}
    > +
    > +	return 0;
    > +}
    > +
    > +static struct pmbus_driver_info pxe1610_info = {
    > +	.pages = PXE1610_NUM_PAGES,
    > +	.format[PSC_VOLTAGE_IN] = linear,
    > +	.format[PSC_VOLTAGE_OUT] = vid,
    > +	.format[PSC_CURRENT_IN] = linear,
    > +	.format[PSC_CURRENT_OUT] = linear,
    > +	.format[PSC_TEMPERATURE] = linear,
    > +	.format[PSC_POWER] = linear,
    > +	.func[0] = PMBUS_HAVE_VIN
    > +		| PMBUS_HAVE_VOUT | PMBUS_HAVE_IIN
    > +		| PMBUS_HAVE_IOUT | PMBUS_HAVE_PIN
    > +		| PMBUS_HAVE_POUT | PMBUS_HAVE_TEMP
    > +		| PMBUS_HAVE_STATUS_VOUT | PMBUS_HAVE_STATUS_IOUT
    > +		| PMBUS_HAVE_STATUS_INPUT | PMBUS_HAVE_STATUS_TEMP,
    > +	.func[1] = PMBUS_HAVE_VIN
    > +		| PMBUS_HAVE_VOUT | PMBUS_HAVE_IIN
    > +		| PMBUS_HAVE_IOUT | PMBUS_HAVE_PIN
    > +		| PMBUS_HAVE_POUT | PMBUS_HAVE_TEMP
    > +		| PMBUS_HAVE_STATUS_VOUT | PMBUS_HAVE_STATUS_IOUT
    > +		| PMBUS_HAVE_STATUS_INPUT | PMBUS_HAVE_STATUS_TEMP,
    > +	.func[2] = PMBUS_HAVE_VIN
    > +		| PMBUS_HAVE_VOUT | PMBUS_HAVE_IIN
    > +		| PMBUS_HAVE_IOUT | PMBUS_HAVE_PIN
    > +		| PMBUS_HAVE_POUT | PMBUS_HAVE_TEMP
    > +		| PMBUS_HAVE_STATUS_VOUT | PMBUS_HAVE_STATUS_IOUT
    > +		| PMBUS_HAVE_STATUS_INPUT | PMBUS_HAVE_STATUS_TEMP,
    > +	.identify = pxe1610_identify,
    > +};
    > +
    > +static int pxe1610_probe(struct i2c_client *client,
    > +			  const struct i2c_device_id *id)
    > +{
    > +	struct pmbus_driver_info *info;
    > +	u8 buf[I2C_SMBUS_BLOCK_MAX];
    > +	int ret;
    > +
    > +	if (!i2c_check_functionality(
    > +			client->adapter,
    > +			I2C_FUNC_SMBUS_READ_BYTE_DATA
    > +			| I2C_FUNC_SMBUS_READ_WORD_DATA
    > +			| I2C_FUNC_SMBUS_READ_BLOCK_DATA))
    > +		return -ENODEV;
    > +
    > +	/*
    > +	 * By default this device doesn't boot to page 0, so set page 0
    > +	 * to access all pmbus registers.
    > +	 */
    > +	i2c_smbus_write_byte_data(client, PMBUS_PAGE, 0);
    > +
    > +	/* Read Manufacturer id */
    > +	ret = i2c_smbus_read_block_data(client, PMBUS_MFR_ID, buf);
    > +	if (ret < 0) {
    > +		dev_err(&client->dev, "Failed to read PMBUS_MFR_ID\n");
    > +		return ret;
    > +	}
    > +	if (ret != 2 || strncmp(buf, "XP", 2)) {
    > +		dev_err(&client->dev, "MFR_ID unrecognized\n");
    > +		return -ENODEV;
    > +	}
    > +
    > +	info = devm_kmemdup(&client->dev, &pxe1610_info,
    > +			    sizeof(struct pmbus_driver_info),
    > +			    GFP_KERNEL);
    > +	if (!info)
    > +		return -ENOMEM;
    > +
    > +	return pmbus_do_probe(client, id, info);
    > +}
    > +
    > +static const struct i2c_device_id pxe1610_id[] = {
    > +	{"pxe1610", 0},
    > +	{"pxe1110", 0},
    > +	{"pxm1310", 0},
    > +	{}
    > +};
    > +
    > +MODULE_DEVICE_TABLE(i2c, pxe1610_id);
    > +
    > +static struct i2c_driver pxe1610_driver = {
    > +	.driver = {
    > +			.name = "pxe1610",
    > +			},
    > +	.probe = pxe1610_probe,
    > +	.remove = pmbus_do_remove,
    > +	.id_table = pxe1610_id,
    > +};
    > +
    > +module_i2c_driver(pxe1610_driver);
    > +
    > +MODULE_AUTHOR("Vijay Khemka <vijaykhemka@fb.com>");
    > +MODULE_DESCRIPTION("PMBus driver for Infineon PXE1610, PXE1110 and PXM1310");
    > +MODULE_LICENSE("GPL");

Patch
diff mbox series

diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig
index 30751eb9550a..338ef9b5a395 100644
--- a/drivers/hwmon/pmbus/Kconfig
+++ b/drivers/hwmon/pmbus/Kconfig
@@ -154,6 +154,15 @@  config SENSORS_MAX8688
 	  This driver can also be built as a module. If so, the module will
 	  be called max8688.
 
+config SENSORS_PXE1610
+	tristate "Infineon PXE1610"
+	help
+	  If you say yes here you get hardware monitoring support for Infineon
+	  PXE1610.
+
+	  This driver can also be built as a module. If so, the module will
+	  be called pxe1610.
+
 config SENSORS_TPS40422
 	tristate "TI TPS40422"
 	help
diff --git a/drivers/hwmon/pmbus/Makefile b/drivers/hwmon/pmbus/Makefile
index 2219b9300316..b0fbd017a91a 100644
--- a/drivers/hwmon/pmbus/Makefile
+++ b/drivers/hwmon/pmbus/Makefile
@@ -18,6 +18,7 @@  obj-$(CONFIG_SENSORS_MAX20751)	+= max20751.o
 obj-$(CONFIG_SENSORS_MAX31785)	+= max31785.o
 obj-$(CONFIG_SENSORS_MAX34440)	+= max34440.o
 obj-$(CONFIG_SENSORS_MAX8688)	+= max8688.o
+obj-$(CONFIG_SENSORS_PXE1610)	+= pxe1610.o
 obj-$(CONFIG_SENSORS_TPS40422)	+= tps40422.o
 obj-$(CONFIG_SENSORS_TPS53679)	+= tps53679.o
 obj-$(CONFIG_SENSORS_UCD9000)	+= ucd9000.o
diff --git a/drivers/hwmon/pmbus/pxe1610.c b/drivers/hwmon/pmbus/pxe1610.c
new file mode 100644
index 000000000000..ebe3f023f840
--- /dev/null
+++ b/drivers/hwmon/pmbus/pxe1610.c
@@ -0,0 +1,139 @@ 
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Hardware monitoring driver for Infineon PXE1610
+ *
+ * Copyright (c) 2019 Facebook Inc
+ *
+ */
+
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include "pmbus.h"
+
+#define PXE1610_NUM_PAGES 3
+
+/* Identify chip parameters. */
+static int pxe1610_identify(struct i2c_client *client,
+			     struct pmbus_driver_info *info)
+{
+	if (pmbus_check_byte_register(client, 0, PMBUS_VOUT_MODE)) {
+		u8 vout_mode;
+		int ret;
+
+		/* Read the register with VOUT scaling value.*/
+		ret = pmbus_read_byte_data(client, 0, PMBUS_VOUT_MODE);
+		if (ret < 0)
+			return ret;
+
+		vout_mode = ret & GENMASK(4, 0);
+
+		switch (vout_mode) {
+		case 1:
+			info->vrm_version = vr12;
+			break;
+		case 2:
+			info->vrm_version = vr13;
+			break;
+		default:
+			return -ENODEV;
+		}
+	}
+
+	return 0;
+}
+
+static struct pmbus_driver_info pxe1610_info = {
+	.pages = PXE1610_NUM_PAGES,
+	.format[PSC_VOLTAGE_IN] = linear,
+	.format[PSC_VOLTAGE_OUT] = vid,
+	.format[PSC_CURRENT_IN] = linear,
+	.format[PSC_CURRENT_OUT] = linear,
+	.format[PSC_TEMPERATURE] = linear,
+	.format[PSC_POWER] = linear,
+	.func[0] = PMBUS_HAVE_VIN
+		| PMBUS_HAVE_VOUT | PMBUS_HAVE_IIN
+		| PMBUS_HAVE_IOUT | PMBUS_HAVE_PIN
+		| PMBUS_HAVE_POUT | PMBUS_HAVE_TEMP
+		| PMBUS_HAVE_STATUS_VOUT | PMBUS_HAVE_STATUS_IOUT
+		| PMBUS_HAVE_STATUS_INPUT | PMBUS_HAVE_STATUS_TEMP,
+	.func[1] = PMBUS_HAVE_VIN
+		| PMBUS_HAVE_VOUT | PMBUS_HAVE_IIN
+		| PMBUS_HAVE_IOUT | PMBUS_HAVE_PIN
+		| PMBUS_HAVE_POUT | PMBUS_HAVE_TEMP
+		| PMBUS_HAVE_STATUS_VOUT | PMBUS_HAVE_STATUS_IOUT
+		| PMBUS_HAVE_STATUS_INPUT | PMBUS_HAVE_STATUS_TEMP,
+	.func[2] = PMBUS_HAVE_VIN
+		| PMBUS_HAVE_VOUT | PMBUS_HAVE_IIN
+		| PMBUS_HAVE_IOUT | PMBUS_HAVE_PIN
+		| PMBUS_HAVE_POUT | PMBUS_HAVE_TEMP
+		| PMBUS_HAVE_STATUS_VOUT | PMBUS_HAVE_STATUS_IOUT
+		| PMBUS_HAVE_STATUS_INPUT | PMBUS_HAVE_STATUS_TEMP,
+	.identify = pxe1610_identify,
+};
+
+static int pxe1610_probe(struct i2c_client *client,
+			  const struct i2c_device_id *id)
+{
+	struct pmbus_driver_info *info;
+	u8 buf[I2C_SMBUS_BLOCK_MAX];
+	int ret;
+
+	if (!i2c_check_functionality(
+			client->adapter,
+			I2C_FUNC_SMBUS_READ_BYTE_DATA
+			| I2C_FUNC_SMBUS_READ_WORD_DATA
+			| I2C_FUNC_SMBUS_READ_BLOCK_DATA))
+		return -ENODEV;
+
+	/*
+	 * By default this device doesn't boot to page 0, so set page 0
+	 * to access all pmbus registers.
+	 */
+	i2c_smbus_write_byte_data(client, PMBUS_PAGE, 0);
+
+	/* Read Manufacturer id */
+	ret = i2c_smbus_read_block_data(client, PMBUS_MFR_ID, buf);
+	if (ret < 0) {
+		dev_err(&client->dev, "Failed to read PMBUS_MFR_ID\n");
+		return ret;
+	}
+	if (ret != 2 || strncmp(buf, "XP", 2)) {
+		dev_err(&client->dev, "MFR_ID unrecognized\n");
+		return -ENODEV;
+	}
+
+	info = devm_kmemdup(&client->dev, &pxe1610_info,
+			    sizeof(struct pmbus_driver_info),
+			    GFP_KERNEL);
+	if (!info)
+		return -ENOMEM;
+
+	return pmbus_do_probe(client, id, info);
+}
+
+static const struct i2c_device_id pxe1610_id[] = {
+	{"pxe1610", 0},
+	{"pxe1110", 0},
+	{"pxm1310", 0},
+	{}
+};
+
+MODULE_DEVICE_TABLE(i2c, pxe1610_id);
+
+static struct i2c_driver pxe1610_driver = {
+	.driver = {
+			.name = "pxe1610",
+			},
+	.probe = pxe1610_probe,
+	.remove = pmbus_do_remove,
+	.id_table = pxe1610_id,
+};
+
+module_i2c_driver(pxe1610_driver);
+
+MODULE_AUTHOR("Vijay Khemka <vijaykhemka@fb.com>");
+MODULE_DESCRIPTION("PMBus driver for Infineon PXE1610, PXE1110 and PXM1310");
+MODULE_LICENSE("GPL");