From: Paul Walmsley <paul.walmsley@sifive.com>
To: linux-kernel@vger.kernel.org, linux-riscv@lists.infradead.org
Cc: Paul Walmsley <paul@pwsan.com>, Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Palmer Dabbelt <palmer@sifive.com>,
Albert Ou <aou@eecs.berkeley.edu>,
ShihPo Hung <shihpo.hung@sifive.com>,
devicetree@vger.kernel.org
Subject: [PATCH 4/5] riscv: dts: add initial support for the SiFive FU540-C000 SoC
Date: Sun, 2 Jun 2019 01:01:25 -0700 [thread overview]
Message-ID: <20190602080126.31075-5-paul.walmsley@sifive.com> (raw)
In-Reply-To: <20190602080126.31075-1-paul.walmsley@sifive.com>
Add initial support for the SiFive FU540-C000 SoC. This is a 28nm SoC
based around the SiFive U54-MC core complex and a TileLink
interconnect.
This file is expected to grow as more device drivers are added to the
kernel.
This patch includes a fix to the QSPI memory map due to a
documentation bug, found by ShihPo Hung <shihpo.hung@sifive.com>, adds
entries for the I2C controller, and merges all DT changes that
formerly were made dynamically by the riscv-pk BBL proxy kernel.
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: ShihPo Hung <shihpo.hung@sifive.com>
Cc: devicetree@vger.kernel.org
Cc: linux-riscv@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
---
arch/riscv/boot/dts/sifive/fu540-c000.dtsi | 215 +++++++++++++++++++++
1 file changed, 215 insertions(+)
create mode 100644 arch/riscv/boot/dts/sifive/fu540-c000.dtsi
diff --git a/arch/riscv/boot/dts/sifive/fu540-c000.dtsi b/arch/riscv/boot/dts/sifive/fu540-c000.dtsi
new file mode 100644
index 000000000000..3c06ee4b2b29
--- /dev/null
+++ b/arch/riscv/boot/dts/sifive/fu540-c000.dtsi
@@ -0,0 +1,215 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/* Copyright (c) 2018-2019 SiFive, Inc */
+
+/dts-v1/;
+
+#include <dt-bindings/clock/sifive-fu540-prci.h>
+
+/ {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ compatible = "sifive,fu540-c000", "sifive,fu540";
+
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart1;
+ };
+
+ chosen {
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ timebase-frequency = <1000000>;
+ cpu0: cpu@0 {
+ compatible = "sifive,e51", "sifive,rocket0", "riscv";
+ device_type = "cpu";
+ i-cache-block-size = <64>;
+ i-cache-sets = <128>;
+ i-cache-size = <16384>;
+ reg = <0>;
+ riscv,isa = "rv64imac";
+ status = "disabled";
+ cpu0_intc: interrupt-controller {
+ #interrupt-cells = <1>;
+ compatible = "riscv,cpu-intc";
+ interrupt-controller;
+ };
+ };
+ cpu1: cpu@1 {
+ compatible = "sifive,u54-mc", "sifive,rocket0", "riscv";
+ d-cache-block-size = <64>;
+ d-cache-sets = <64>;
+ d-cache-size = <32768>;
+ d-tlb-sets = <1>;
+ d-tlb-size = <32>;
+ device_type = "cpu";
+ i-cache-block-size = <64>;
+ i-cache-sets = <64>;
+ i-cache-size = <32768>;
+ i-tlb-sets = <1>;
+ i-tlb-size = <32>;
+ mmu-type = "riscv,sv39";
+ reg = <1>;
+ riscv,isa = "rv64imafdc";
+ tlb-split;
+ cpu1_intc: interrupt-controller {
+ #interrupt-cells = <1>;
+ compatible = "riscv,cpu-intc";
+ interrupt-controller;
+ };
+ };
+ cpu2: cpu@2 {
+ clock-frequency = <0>;
+ compatible = "sifive,u54-mc", "sifive,rocket0", "riscv";
+ d-cache-block-size = <64>;
+ d-cache-sets = <64>;
+ d-cache-size = <32768>;
+ d-tlb-sets = <1>;
+ d-tlb-size = <32>;
+ device_type = "cpu";
+ i-cache-block-size = <64>;
+ i-cache-sets = <64>;
+ i-cache-size = <32768>;
+ i-tlb-sets = <1>;
+ i-tlb-size = <32>;
+ mmu-type = "riscv,sv39";
+ reg = <2>;
+ riscv,isa = "rv64imafdc";
+ tlb-split;
+ cpu2_intc: interrupt-controller {
+ #interrupt-cells = <1>;
+ compatible = "riscv,cpu-intc";
+ interrupt-controller;
+ };
+ };
+ cpu3: cpu@3 {
+ clock-frequency = <0>;
+ compatible = "sifive,u54-mc", "sifive,rocket0", "riscv";
+ d-cache-block-size = <64>;
+ d-cache-sets = <64>;
+ d-cache-size = <32768>;
+ d-tlb-sets = <1>;
+ d-tlb-size = <32>;
+ device_type = "cpu";
+ i-cache-block-size = <64>;
+ i-cache-sets = <64>;
+ i-cache-size = <32768>;
+ i-tlb-sets = <1>;
+ i-tlb-size = <32>;
+ mmu-type = "riscv,sv39";
+ reg = <3>;
+ riscv,isa = "rv64imafdc";
+ tlb-split;
+ cpu3_intc: interrupt-controller {
+ #interrupt-cells = <1>;
+ compatible = "riscv,cpu-intc";
+ interrupt-controller;
+ };
+ };
+ cpu4: cpu@4 {
+ clock-frequency = <0>;
+ compatible = "sifive,u54-mc", "sifive,rocket0", "riscv";
+ d-cache-block-size = <64>;
+ d-cache-sets = <64>;
+ d-cache-size = <32768>;
+ d-tlb-sets = <1>;
+ d-tlb-size = <32>;
+ device_type = "cpu";
+ i-cache-block-size = <64>;
+ i-cache-sets = <64>;
+ i-cache-size = <32768>;
+ i-tlb-sets = <1>;
+ i-tlb-size = <32>;
+ mmu-type = "riscv,sv39";
+ reg = <4>;
+ riscv,isa = "rv64imafdc";
+ tlb-split;
+ cpu4_intc: interrupt-controller {
+ #interrupt-cells = <1>;
+ compatible = "riscv,cpu-intc";
+ interrupt-controller;
+ };
+ };
+ };
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ compatible = "sifive,fu540-c000", "sifive,fu540", "simple-bus";
+ ranges;
+ plic0: interrupt-controller@c000000 {
+ #interrupt-cells = <1>;
+ compatible = "sifive,plic-1.0.0";
+ reg = <0x0 0xc000000 0x0 0x4000000>;
+ riscv,ndev = <53>;
+ interrupt-controller;
+ interrupts-extended = <
+ &cpu0_intc 0xffffffff
+ &cpu1_intc 0xffffffff &cpu1_intc 9
+ &cpu2_intc 0xffffffff &cpu2_intc 9
+ &cpu3_intc 0xffffffff &cpu3_intc 9
+ &cpu4_intc 0xffffffff &cpu4_intc 9>;
+ };
+ prci: clock-controller@10000000 {
+ compatible = "sifive,fu540-c000-prci";
+ reg = <0x0 0x10000000 0x0 0x1000>;
+ clocks = <&hfclk>, <&rtcclk>;
+ #clock-cells = <1>;
+ };
+ uart0: serial@10010000 {
+ compatible = "sifive,fu540-c000-uart", "sifive,uart0";
+ reg = <0x0 0x10010000 0x0 0x1000>;
+ interrupt-parent = <&plic0>;
+ interrupts = <4>;
+ clocks = <&prci PRCI_CLK_TLCLK>;
+ };
+ uart1: serial@10011000 {
+ compatible = "sifive,fu540-c000-uart", "sifive,uart0";
+ reg = <0x0 0x10011000 0x0 0x1000>;
+ interrupt-parent = <&plic0>;
+ interrupts = <5>;
+ clocks = <&prci PRCI_CLK_TLCLK>;
+ };
+ i2c0: i2c@10030000 {
+ compatible = "sifive,fu540-c000-i2c", "sifive,i2c0";
+ reg = <0x0 0x10030000 0x0 0x1000>;
+ interrupt-parent = <&plic0>;
+ interrupts = <50>;
+ clocks = <&prci PRCI_CLK_TLCLK>;
+ reg-shift = <2>;
+ reg-io-width = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ qspi0: spi@10040000 {
+ compatible = "sifive,fu540-c000-spi", "sifive,spi0";
+ reg = <0x0 0x10040000 0x0 0x1000
+ 0x0 0x20000000 0x0 0x10000000>;
+ interrupt-parent = <&plic0>;
+ interrupts = <51>;
+ clocks = <&prci PRCI_CLK_TLCLK>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ qspi1: spi@10041000 {
+ compatible = "sifive,fu540-c000-spi", "sifive,spi0";
+ reg = <0x0 0x10041000 0x0 0x1000
+ 0x0 0x30000000 0x0 0x10000000>;
+ interrupt-parent = <&plic0>;
+ interrupts = <52>;
+ clocks = <&prci PRCI_CLK_TLCLK>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ qspi2: spi@10050000 {
+ compatible = "sifive,fu540-c000-spi", "sifive,spi0";
+ reg = <0x0 0x10050000 0x0 0x1000>;
+ interrupt-parent = <&plic0>;
+ interrupts = <6>;
+ clocks = <&prci PRCI_CLK_TLCLK>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+};
--
2.20.1
next prev parent reply other threads:[~2019-06-02 8:01 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-06-02 8:01 [PATCH 0/5] arch: riscv: add board and SoC DT file support Paul Walmsley
2019-06-02 8:01 ` [PATCH 1/5] arch: riscv: add support for building DTB files from DT source data Paul Walmsley
2019-06-02 8:01 ` [PATCH 2/5] dt-bindings: riscv: sifive: add YAML documentation for the SiFive FU540 Paul Walmsley
2019-06-02 8:01 ` [PATCH 3/5] dt-bindings: riscv: convert cpu binding to json-schema Paul Walmsley
2019-06-10 21:46 ` Rob Herring
2019-06-21 19:49 ` Rob Herring
2019-06-21 21:39 ` Paul Walmsley
2019-06-02 8:01 ` Paul Walmsley [this message]
2019-06-02 8:01 ` [PATCH 5/5] riscv: dts: add initial board data for the SiFive HiFive Unleashed Paul Walmsley
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190602080126.31075-5-paul.walmsley@sifive.com \
--to=paul.walmsley@sifive.com \
--cc=aou@eecs.berkeley.edu \
--cc=devicetree@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-riscv@lists.infradead.org \
--cc=mark.rutland@arm.com \
--cc=palmer@sifive.com \
--cc=paul@pwsan.com \
--cc=robh+dt@kernel.org \
--cc=shihpo.hung@sifive.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).