From: Mason Yang <masonccyang@mxic.com.tw>
To: miquel.raynal@bootlin.com, marek.vasut@gmail.com,
linux-kernel@vger.kernel.org, bbrezillon@kernel.org,
richard@nod.at, dwmw2@infradead.org, computersforpeace@gmail.com,
linux-mtd@lists.infradead.org, vigneshr@ti.com,
tglx@linutronix.de, frieder.schrempf@kontron.de,
allison@lohutok.net
Cc: juliensu@mxic.com.tw, masonccyang@mxic.com.tw
Subject: [PATCH v3] mtd: rawnand: Add Macronix NAND read retry support
Date: Mon, 3 Jun 2019 10:42:04 +0800 [thread overview]
Message-ID: <1559529724-5454-1-git-send-email-masonccyang@mxic.com.tw> (raw)
Add support for Macronix NAND read retry.
Macronix NANDs support specific read operation for data recovery,
which can be enabled with a SET_FEATURE.
Driver checks byte 167 of Vendor Blocks in ONFI parameter page table
to see if this high-reliability function is supported.
Signed-off-by: Mason Yang <masonccyang@mxic.com.tw>
---
drivers/mtd/nand/raw/nand_macronix.c | 45 ++++++++++++++++++++++++++++++++++++
1 file changed, 45 insertions(+)
diff --git a/drivers/mtd/nand/raw/nand_macronix.c b/drivers/mtd/nand/raw/nand_macronix.c
index fad57c3..58511ae 100644
--- a/drivers/mtd/nand/raw/nand_macronix.c
+++ b/drivers/mtd/nand/raw/nand_macronix.c
@@ -8,6 +8,50 @@
#include "internals.h"
+#define MACRONIX_READ_RETRY_BIT BIT(0)
+#define MACRONIX_NUM_READ_RETRY_MODES 6
+
+struct nand_onfi_vendor_macronix {
+ u8 reserved;
+ u8 reliability_func;
+} __packed;
+
+static int macronix_nand_setup_read_retry(struct nand_chip *chip, int mode)
+{
+ u8 feature[ONFI_SUBFEATURE_PARAM_LEN];
+
+ if (!chip->parameters.supports_set_get_features ||
+ !test_bit(ONFI_FEATURE_ADDR_READ_RETRY,
+ chip->parameters.set_feature_list))
+ return -ENOTSUPP;
+
+ feature[0] = mode;
+ return nand_set_features(chip, ONFI_FEATURE_ADDR_READ_RETRY, feature);
+}
+
+static void macronix_nand_onfi_init(struct nand_chip *chip)
+{
+ struct nand_parameters *p = &chip->parameters;
+ struct nand_onfi_vendor_macronix *mxic;
+
+ if (!p->onfi)
+ return;
+
+ mxic = (struct nand_onfi_vendor_macronix *)p->onfi->vendor;
+ if ((mxic->reliability_func & MACRONIX_READ_RETRY_BIT) == 0)
+ return;
+
+ chip->read_retries = MACRONIX_NUM_READ_RETRY_MODES;
+ chip->setup_read_retry = macronix_nand_setup_read_retry;
+
+ if (p->supports_set_get_features) {
+ bitmap_set(p->set_feature_list,
+ ONFI_FEATURE_ADDR_READ_RETRY, 1);
+ bitmap_set(p->get_feature_list,
+ ONFI_FEATURE_ADDR_READ_RETRY, 1);
+ }
+}
+
/*
* Macronix AC series does not support using SET/GET_FEATURES to change
* the timings unlike what is declared in the parameter page. Unflag
@@ -56,6 +100,7 @@ static int macronix_nand_init(struct nand_chip *chip)
chip->options |= NAND_BBM_FIRSTPAGE | NAND_BBM_SECONDPAGE;
macronix_nand_fix_broken_get_timings(chip);
+ macronix_nand_onfi_init(chip);
return 0;
}
--
1.9.1
next reply other threads:[~2019-06-03 2:19 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-06-03 2:42 Mason Yang [this message]
2019-07-01 7:14 ` [PATCH v3] mtd: rawnand: Add Macronix NAND read retry support Miquel Raynal
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1559529724-5454-1-git-send-email-masonccyang@mxic.com.tw \
--to=masonccyang@mxic.com.tw \
--cc=allison@lohutok.net \
--cc=bbrezillon@kernel.org \
--cc=computersforpeace@gmail.com \
--cc=dwmw2@infradead.org \
--cc=frieder.schrempf@kontron.de \
--cc=juliensu@mxic.com.tw \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mtd@lists.infradead.org \
--cc=marek.vasut@gmail.com \
--cc=miquel.raynal@bootlin.com \
--cc=richard@nod.at \
--cc=tglx@linutronix.de \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).