From: Dmitry Osipenko <digetx@gmail.com>
To: Daniel Lezcano <daniel.lezcano@linaro.org>,
Joseph Lo <josephl@nvidia.com>,
Thierry Reding <thierry.reding@gmail.com>,
Jonathan Hunter <jonathanh@nvidia.com>,
Peter De Schrijver <pdeschrijver@nvidia.com>
Cc: linux-tegra@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v4 02/10] clocksource/drivers/tegra: Unify timer code
Date: Mon, 3 Jun 2019 21:59:40 +0300 [thread overview]
Message-ID: <20190603185948.30438-3-digetx@gmail.com> (raw)
In-Reply-To: <20190603185948.30438-1-digetx@gmail.com>
Tegra132 is 64bit platform and it has the tegra20-timer hardware unit.
Right now the corresponding timer code isn't compiled for ARM64, remove
ifdef'iness from the code and compile tegra20-timer for both 32 and 64 bit
platforms. Also note that like the older generations, Tegra210 has the
microseconds counter, hence the timer_us clocksource is now made available
for Tegra210 as well.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
---
drivers/clocksource/timer-tegra20.c | 111 +++++++++++++++-------------
1 file changed, 60 insertions(+), 51 deletions(-)
diff --git a/drivers/clocksource/timer-tegra20.c b/drivers/clocksource/timer-tegra20.c
index 58e8bb6deac9..57e7aa2b80a3 100644
--- a/drivers/clocksource/timer-tegra20.c
+++ b/drivers/clocksource/timer-tegra20.c
@@ -30,10 +30,6 @@
#include "timer-of.h"
-#ifdef CONFIG_ARM
-#include <asm/mach/time.h>
-#endif
-
#define RTC_SECONDS 0x08
#define RTC_SHADOW_SECONDS 0x0c
#define RTC_MILLISECONDS 0x10
@@ -48,25 +44,17 @@
#define TIMER_PCR 0x4
#define TIMER_PCR_INTR_CLR BIT(30)
-#ifdef CONFIG_ARM
-#define TIMER_CPU0 0x00 /* TIMER1 */
-#define TIMER_CPU2 0x50 /* TIMER3 */
+#define TIMER1_BASE 0x00
+#define TIMER2_BASE 0x08
+#define TIMER3_BASE 0x50
+#define TIMER4_BASE 0x58
+#define TIMER10_BASE 0x90
+
#define TIMER1_IRQ_IDX 0
-#define IRQ_IDX_FOR_CPU(cpu) (TIMER1_IRQ_IDX + cpu)
-#define TIMER_BASE_FOR_CPU(cpu) \
- (((cpu) & 1) * 8 + ((cpu) < 2 ? TIMER_CPU0 : TIMER_CPU2))
-#else
-#define TIMER_CPU0 0x90 /* TIMER10 */
#define TIMER10_IRQ_IDX 10
-#define IRQ_IDX_FOR_CPU(cpu) (TIMER10_IRQ_IDX + cpu)
-#define TIMER_BASE_FOR_CPU(cpu) (TIMER_CPU0 + (cpu) * 8)
-#endif
static u32 usec_config;
static void __iomem *timer_reg_base;
-#ifdef CONFIG_ARM
-static struct delay_timer tegra_delay_timer;
-#endif
static int tegra_timer_set_next_event(unsigned long cycles,
struct clock_event_device *evt)
@@ -164,17 +152,23 @@ static int tegra_timer_stop(unsigned int cpu)
return 0;
}
-#ifdef CONFIG_ARM
static u64 notrace tegra_read_sched_clock(void)
{
return readl(timer_reg_base + TIMERUS_CNTR_1US);
}
+#ifdef CONFIG_ARM
static unsigned long tegra_delay_timer_read_counter_long(void)
{
return readl(timer_reg_base + TIMERUS_CNTR_1US);
}
+static struct delay_timer tegra_delay_timer = {
+ .read_current_timer = tegra_delay_timer_read_counter_long,
+ .freq = 1000000,
+};
+#endif
+
static struct timer_of suspend_rtc_to = {
.flags = TIMER_OF_BASE | TIMER_OF_CLOCK,
};
@@ -199,9 +193,34 @@ static struct clocksource suspend_rtc_clocksource = {
.mask = CLOCKSOURCE_MASK(32),
.flags = CLOCK_SOURCE_IS_CONTINUOUS | CLOCK_SOURCE_SUSPEND_NONSTOP,
};
-#endif
-static int tegra_init_timer(struct device_node *np, bool tegra20)
+static inline unsigned int tegra_base_for_cpu(int cpu, bool tegra20)
+{
+ if (tegra20) {
+ switch (cpu) {
+ case 0:
+ return TIMER1_BASE;
+ case 1:
+ return TIMER2_BASE;
+ case 2:
+ return TIMER3_BASE;
+ default:
+ return TIMER4_BASE;
+ }
+ }
+
+ return TIMER10_BASE + cpu * 8;
+}
+
+static inline unsigned int tegra_irq_idx_for_cpu(int cpu, bool tegra20)
+{
+ if (tegra20)
+ return TIMER1_IRQ_IDX + cpu;
+
+ return TIMER10_IRQ_IDX + cpu;
+}
+
+static int __init tegra_init_timer(struct device_node *np, bool tegra20)
{
struct timer_of *to;
int cpu, ret;
@@ -252,6 +271,8 @@ static int tegra_init_timer(struct device_node *np, bool tegra20)
for_each_possible_cpu(cpu) {
struct timer_of *cpu_to = per_cpu_ptr(&tegra_to, cpu);
+ unsigned int base = tegra_base_for_cpu(cpu, tegra20);
+ unsigned int idx = tegra_irq_idx_for_cpu(cpu, tegra20);
/*
* TIMER1-9 are fixed to 1MHz, TIMER10-13 are running off the
@@ -260,10 +281,10 @@ static int tegra_init_timer(struct device_node *np, bool tegra20)
if (tegra20)
cpu_to->of_clk.rate = 1000000;
- cpu_to->of_base.base = timer_reg_base + TIMER_BASE_FOR_CPU(cpu);
+ cpu_to = per_cpu_ptr(&tegra_to, cpu);
+ cpu_to->of_base.base = timer_reg_base + base;
cpu_to->clkevt.cpumask = cpumask_of(cpu);
- cpu_to->clkevt.irq =
- irq_of_parse_and_map(np, IRQ_IDX_FOR_CPU(cpu));
+ cpu_to->clkevt.irq = irq_of_parse_and_map(np, idx);
if (!cpu_to->clkevt.irq) {
pr_err("%s: can't map IRQ for CPU%d\n",
__func__, cpu);
@@ -283,6 +304,18 @@ static int tegra_init_timer(struct device_node *np, bool tegra20)
}
}
+ sched_clock_register(tegra_read_sched_clock, 32, 1000000);
+
+ ret = clocksource_mmio_init(timer_reg_base + TIMERUS_CNTR_1US,
+ "timer_us", 1000000,
+ 300, 32, clocksource_mmio_readl_up);
+ if (ret)
+ pr_err("failed to register clocksource: %d\n", ret);
+
+#ifdef CONFIG_ARM
+ register_current_timer_delay(&tegra_delay_timer);
+#endif
+
cpuhp_setup_state(CPUHP_AP_TEGRA_TIMER_STARTING,
"AP_TEGRA_TIMER_STARTING", tegra_timer_setup,
tegra_timer_stop);
@@ -303,39 +336,17 @@ static int tegra_init_timer(struct device_node *np, bool tegra20)
return ret;
}
-#ifdef CONFIG_ARM64
static int __init tegra210_init_timer(struct device_node *np)
{
return tegra_init_timer(np, false);
}
TIMER_OF_DECLARE(tegra210_timer, "nvidia,tegra210-timer", tegra210_init_timer);
-#else /* CONFIG_ARM */
+
static int __init tegra20_init_timer(struct device_node *np)
{
- struct timer_of *to;
- int err;
-
- err = tegra_init_timer(np, true);
- if (err)
- return err;
-
- to = this_cpu_ptr(&tegra_to);
-
- sched_clock_register(tegra_read_sched_clock, 32,
- timer_of_rate(to));
- err = clocksource_mmio_init(timer_reg_base + TIMERUS_CNTR_1US,
- "timer_us", timer_of_rate(to),
- 300, 32, clocksource_mmio_readl_up);
- if (err)
- pr_err("Failed to register clocksource: %d\n", err);
-
- tegra_delay_timer.read_current_timer =
- tegra_delay_timer_read_counter_long;
- tegra_delay_timer.freq = timer_of_rate(to);
- register_current_timer_delay(&tegra_delay_timer);
-
- return 0;
+ return tegra_init_timer(np, true);
}
+TIMER_OF_DECLARE(tegra20_timer, "nvidia,tegra20-timer", tegra20_init_timer);
static int __init tegra20_init_rtc(struct device_node *np)
{
@@ -350,5 +361,3 @@ static int __init tegra20_init_rtc(struct device_node *np)
return 0;
}
TIMER_OF_DECLARE(tegra20_rtc, "nvidia,tegra20-rtc", tegra20_init_rtc);
-TIMER_OF_DECLARE(tegra20_timer, "nvidia,tegra20-timer", tegra20_init_timer);
-#endif
--
2.21.0
next prev parent reply other threads:[~2019-06-03 19:04 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-06-03 18:59 [PATCH v4 00/10] NVIDIA Tegra clocksource driver improvements Dmitry Osipenko
2019-06-03 18:59 ` [PATCH v4 01/10] clocksource/drivers/tegra: Support per-CPU timers on all Tegra's Dmitry Osipenko
2019-06-03 18:59 ` Dmitry Osipenko [this message]
2019-06-03 18:59 ` [PATCH v4 03/10] clocksource/drivers/tegra: Reset hardware state on init Dmitry Osipenko
2019-06-03 18:59 ` [PATCH v4 04/10] clocksource/drivers/tegra: Replace readl/writel with relaxed versions Dmitry Osipenko
2019-06-03 18:59 ` [PATCH v4 05/10] clocksource/drivers/tegra: Release all IRQ's on request_irq() error Dmitry Osipenko
2019-06-03 18:59 ` [PATCH v4 06/10] clocksource/drivers/tegra: Minor code clean up Dmitry Osipenko
2019-06-03 18:59 ` [PATCH v4 07/10] clocksource/drivers/tegra: Use SPDX identifier Dmitry Osipenko
2019-06-03 18:59 ` [PATCH v4 08/10] clocksource/drivers/tegra: Support COMPILE_TEST universally Dmitry Osipenko
2019-06-03 18:59 ` [PATCH v4 09/10] clocksource/drivers/tegra: Lower clocksource rating for some Tegra's Dmitry Osipenko
2019-06-03 18:59 ` [PATCH v4 10/10] clocksource/drivers/tegra: Rename timer-tegra20.c to timer-tegra.c Dmitry Osipenko
2019-06-04 13:33 ` [PATCH v4 00/10] NVIDIA Tegra clocksource driver improvements Peter De Schrijver
2019-06-04 15:01 ` Dmitry Osipenko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190603185948.30438-3-digetx@gmail.com \
--to=digetx@gmail.com \
--cc=daniel.lezcano@linaro.org \
--cc=jonathanh@nvidia.com \
--cc=josephl@nvidia.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-tegra@vger.kernel.org \
--cc=pdeschrijver@nvidia.com \
--cc=thierry.reding@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).