linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Johannes Weiner <hannes@cmpxchg.org>
To: Andrew Morton <akpm@linux-foundation.org>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>,
	Suren Baghdasaryan <surenb@google.com>,
	Michal Hocko <mhocko@suse.com>,
	linux-mm@kvack.org, cgroups@vger.kernel.org,
	linux-kernel@vger.kernel.org, kernel-team@fb.com
Subject: [PATCH 06/11] mm: vmscan: turn shrink_node_memcg() into shrink_lruvec()
Date: Mon,  3 Jun 2019 17:07:41 -0400	[thread overview]
Message-ID: <20190603210746.15800-7-hannes@cmpxchg.org> (raw)
In-Reply-To: <20190603210746.15800-1-hannes@cmpxchg.org>

A lruvec holds LRU pages owned by a certain NUMA node and cgroup.
Instead of awkwardly passing around a combination of a pgdat and a
memcg pointer, pass down the lruvec as soon as we can look it up.

Nested callers that need to access node or cgroup properties can look
them them up if necessary, but there are only a few cases.

Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
---
 mm/vmscan.c | 21 ++++++++++-----------
 1 file changed, 10 insertions(+), 11 deletions(-)

diff --git a/mm/vmscan.c b/mm/vmscan.c
index 304974481146..b85111474ee2 100644
--- a/mm/vmscan.c
+++ b/mm/vmscan.c
@@ -2210,9 +2210,10 @@ enum scan_balance {
  * nr[0] = anon inactive pages to scan; nr[1] = anon active pages to scan
  * nr[2] = file inactive pages to scan; nr[3] = file active pages to scan
  */
-static void get_scan_count(struct lruvec *lruvec, struct mem_cgroup *memcg,
-			   struct scan_control *sc, unsigned long *nr)
+static void get_scan_count(struct lruvec *lruvec, struct scan_control *sc,
+			   unsigned long *nr)
 {
+	struct mem_cgroup *memcg = lruvec_memcg(lruvec);
 	int swappiness = mem_cgroup_swappiness(memcg);
 	struct zone_reclaim_stat *reclaim_stat = &lruvec->reclaim_stat;
 	u64 fraction[2];
@@ -2460,13 +2461,8 @@ static void get_scan_count(struct lruvec *lruvec, struct mem_cgroup *memcg,
 	}
 }
 
-/*
- * This is a basic per-node page freer.  Used by both kswapd and direct reclaim.
- */
-static void shrink_node_memcg(struct pglist_data *pgdat, struct mem_cgroup *memcg,
-			      struct scan_control *sc)
+static void shrink_lruvec(struct lruvec *lruvec, struct scan_control *sc)
 {
-	struct lruvec *lruvec = mem_cgroup_lruvec(memcg, pgdat);
 	unsigned long nr[NR_LRU_LISTS];
 	unsigned long targets[NR_LRU_LISTS];
 	unsigned long nr_to_scan;
@@ -2476,7 +2472,7 @@ static void shrink_node_memcg(struct pglist_data *pgdat, struct mem_cgroup *memc
 	struct blk_plug plug;
 	bool scan_adjusted;
 
-	get_scan_count(lruvec, memcg, sc, nr);
+	get_scan_count(lruvec, sc, nr);
 
 	/* Record the original scan target for proportional adjustments later */
 	memcpy(targets, nr, sizeof(nr));
@@ -2689,6 +2685,7 @@ static bool shrink_node(pg_data_t *pgdat, struct scan_control *sc)
 
 	memcg = mem_cgroup_iter(root, NULL, &reclaim);
 	do {
+		struct lruvec *lruvec = mem_cgroup_lruvec(memcg, pgdat);
 		unsigned long reclaimed;
 		unsigned long scanned;
 
@@ -2725,7 +2722,8 @@ static bool shrink_node(pg_data_t *pgdat, struct scan_control *sc)
 
 		reclaimed = sc->nr_reclaimed;
 		scanned = sc->nr_scanned;
-		shrink_node_memcg(pgdat, memcg, sc);
+
+		shrink_lruvec(lruvec, sc);
 
 		if (sc->may_shrinkslab) {
 			shrink_slab(sc->gfp_mask, pgdat->node_id,
@@ -3243,6 +3241,7 @@ unsigned long mem_cgroup_shrink_node(struct mem_cgroup *memcg,
 						pg_data_t *pgdat,
 						unsigned long *nr_scanned)
 {
+	struct lruvec *lruvec = mem_cgroup_lruvec(memcg, pgdat);
 	struct scan_control sc = {
 		.nr_to_reclaim = SWAP_CLUSTER_MAX,
 		.target_mem_cgroup = memcg,
@@ -3268,7 +3267,7 @@ unsigned long mem_cgroup_shrink_node(struct mem_cgroup *memcg,
 	 * will pick up pages from other mem cgroup's as well. We hack
 	 * the priority and make it zero.
 	 */
-	shrink_node_memcg(pgdat, memcg, &sc);
+	shrink_lruvec(lruvec, &sc);
 
 	trace_mm_vmscan_memcg_softlimit_reclaim_end(
 					cgroup_ino(memcg->css.cgroup),
-- 
2.21.0


  parent reply	other threads:[~2019-06-03 22:07 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-06-03 21:07 [PATCH 00/11] mm: fix page aging across multiple cgroups Johannes Weiner
2019-06-03 21:07 ` [PATCH 01/11] mm: vmscan: move inactive_list_is_low() swap check to the caller Johannes Weiner
2019-11-07  2:50   ` Shakeel Butt
2019-11-08  3:43     ` Andrew Morton
2019-06-03 21:07 ` [PATCH 02/11] mm: clean up and clarify lruvec lookup procedure Johannes Weiner
2019-11-07  2:50   ` Shakeel Butt
2019-06-03 21:07 ` [PATCH 03/11] mm: vmscan: simplify lruvec_lru_size() Johannes Weiner
2019-11-07  2:51   ` Shakeel Butt
2019-06-03 21:07 ` [PATCH 04/11] mm: vmscan: naming fixes: cgroup_reclaim() and writeback_working() Johannes Weiner
2019-11-07  2:51   ` Shakeel Butt
2019-06-03 21:07 ` [PATCH 05/11] mm: vmscan: replace shrink_node() loop with a retry jump Johannes Weiner
2019-11-07  2:51   ` Shakeel Butt
2019-06-03 21:07 ` Johannes Weiner [this message]
2019-11-07  2:51   ` [PATCH 06/11] mm: vmscan: turn shrink_node_memcg() into shrink_lruvec() Shakeel Butt
2019-06-03 21:07 ` [PATCH 07/11] mm: vmscan: split shrink_node() into node part and memcgs part Johannes Weiner
2019-11-07  2:51   ` Shakeel Butt
2019-06-03 21:07 ` [PATCH 08/11] mm: vmscan: harmonize writeback congestion tracking for nodes & memcgs Johannes Weiner
2019-11-07  2:52   ` Shakeel Butt
2019-06-03 21:07 ` [PATCH 09/11] mm: vmscan: move file exhaustion detection to the node level Johannes Weiner
2019-11-07  2:52   ` Shakeel Butt
2019-06-03 21:07 ` [PATCH 10/11] mm: vmscan: detect file thrashing at the reclaim root Johannes Weiner
2019-06-03 21:07 ` [PATCH 11/11] mm: vmscan: enforce inactive:active ratio " Johannes Weiner
2019-11-07  2:50 ` [PATCH 00/11] mm: fix page aging across multiple cgroups Shakeel Butt
2019-11-07 17:45   ` Johannes Weiner

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190603210746.15800-7-hannes@cmpxchg.org \
    --to=hannes@cmpxchg.org \
    --cc=akpm@linux-foundation.org \
    --cc=aryabinin@virtuozzo.com \
    --cc=cgroups@vger.kernel.org \
    --cc=kernel-team@fb.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=mhocko@suse.com \
    --cc=surenb@google.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).