From: Torsten Duwe <duwe@lst.de>
To: Maxime Ripard <maxime.ripard@bootlin.com>,
Chen-Yu Tsai <wens@csie.org>, Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Thierry Reding <thierry.reding@gmail.com>,
David Airlie <airlied@linux.ie>, Daniel Vetter <daniel@ffwll.ch>,
Andrzej Hajda <a.hajda@samsung.com>,
Laurent Pinchart <Laurent.pinchart@ideasonboard.com>,
Icenowy Zheng <icenowy@aosc.io>,
Sean Paul <seanpaul@chromium.org>,
Vasily Khoruzhick <anarsoul@gmail.com>,
Harald Geyer <harald@ccbib.org>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Thomas Gleixner <tglx@linutronix.de>
Cc: dri-devel@lists.freedesktop.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: [PATCH v2 4/7] drm/bridge: Prepare Analogix anx6345 support
Date: Tue, 4 Jun 2019 14:22:58 +0200 (CEST) [thread overview]
Message-ID: <20190604122258.664D468BFE@newverein.lst.de> (raw)
In-Reply-To: 20190604122150.29D6468B05@newverein.lst.de
Add bit definitions required for the anx6345 and add a
sanity check in anx_dp_aux_transfer.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Torsten Duwe <duwe@suse.de>
---
drivers/gpu/drm/bridge/analogix/analogix-i2c-dptx.c | 2 +-
drivers/gpu/drm/bridge/analogix/analogix-i2c-dptx.h | 8 ++++++++
drivers/gpu/drm/bridge/analogix/analogix-i2c-txcommon.h | 3 +++
3 files changed, 12 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/bridge/analogix/analogix-i2c-dptx.c b/drivers/gpu/drm/bridge/analogix/analogix-i2c-dptx.c
index d6016f789d80..e9d2ed4d410d 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix-i2c-dptx.c
+++ b/drivers/gpu/drm/bridge/analogix/analogix-i2c-dptx.c
@@ -124,7 +124,7 @@ ssize_t anx_dp_aux_transfer(struct regmap *map_dptx,
else /* For non-zero-sized set the length field. */
ctrl1 |= (msg->size - 1) << SP_AUX_LENGTH_SHIFT;
- if ((msg->request & DP_AUX_I2C_READ) == 0) {
+ if ((msg->size > 0) && ((msg->request & DP_AUX_I2C_READ) == 0)) {
/* When WRITE | MOT write values to data buffer */
err = regmap_bulk_write(map_dptx,
SP_DP_BUF_DATA0_REG, buffer,
diff --git a/drivers/gpu/drm/bridge/analogix/analogix-i2c-dptx.h b/drivers/gpu/drm/bridge/analogix/analogix-i2c-dptx.h
index 30436c88f181..95ab89eecc60 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix-i2c-dptx.h
+++ b/drivers/gpu/drm/bridge/analogix/analogix-i2c-dptx.h
@@ -83,7 +83,11 @@
#define SP_CHA_STA BIT(2)
/* Bits for DP System Control Register 3 */
#define SP_HPD_STATUS BIT(6)
+#define SP_HPD_FORCE BIT(5)
+#define SP_HPD_CTRL BIT(4)
#define SP_STRM_VALID BIT(2)
+#define SP_STRM_FORCE BIT(1)
+#define SP_STRM_CTRL BIT(0)
/* Bits for DP System Control Register 4 */
#define SP_ENHANCED_MODE BIT(3)
@@ -128,6 +132,9 @@
#define SP_LINK_BW_SET_MASK 0x1f
#define SP_INITIAL_SLIM_M_AUD_SEL BIT(5)
+/* DP Lane Count Setting Register */
+#define SP_DP_LANE_COUNT_SET_REG 0xa1
+
/* DP Training Pattern Set Register */
#define SP_DP_TRAINING_PATTERN_SET_REG 0xa2
@@ -141,6 +148,7 @@
/* DP Link Training Control Register */
#define SP_DP_LT_CTRL_REG 0xa8
+#define SP_DP_LT_INPROGRESS 0x80
#define SP_LT_ERROR_TYPE_MASK 0x70
# define SP_LT_NO_ERROR 0x00
# define SP_LT_AUX_WRITE_ERROR 0x01
diff --git a/drivers/gpu/drm/bridge/analogix/analogix-i2c-txcommon.h b/drivers/gpu/drm/bridge/analogix/analogix-i2c-txcommon.h
index f48293f86f9d..e3391a50b5d1 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix-i2c-txcommon.h
+++ b/drivers/gpu/drm/bridge/analogix/analogix-i2c-txcommon.h
@@ -188,6 +188,9 @@
#define SP_VBIT BIT(1)
#define SP_AUDIO_LAYOUT BIT(0)
+/* Analog Debug Register 1 */
+#define SP_ANALOG_DEBUG1_REG 0xdc
+
/* Analog Debug Register 2 */
#define SP_ANALOG_DEBUG2_REG 0xdd
#define SP_FORCE_SW_OFF_BYPASS 0x20
--
2.16.4
next prev parent reply other threads:[~2019-06-04 12:23 UTC|newest]
Thread overview: 39+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-06-04 12:21 [PATCH v2 0/7] Add anx6345 DP/eDP bridge for Olimex Teres-I Torsten Duwe
2019-06-04 12:22 ` [PATCH v2 1/7] drm/bridge: move ANA78xx driver to analogix subdirectory Torsten Duwe
2019-06-12 10:16 ` Andrzej Hajda
2019-06-04 12:22 ` [PATCH v2 2/7] drm/bridge: split some definitions of ANX78xx to dedicated headers Torsten Duwe
2019-06-12 7:40 ` Andrzej Hajda
2019-06-04 12:22 ` [PATCH v2 3/7] drm/bridge: extract some Analogix I2C DP common code Torsten Duwe
2019-06-12 7:41 ` Andrzej Hajda
2019-06-04 12:22 ` Torsten Duwe [this message]
2019-06-12 7:43 ` [PATCH v2 4/7] drm/bridge: Prepare Analogix anx6345 support Andrzej Hajda
2019-06-04 12:23 ` [PATCH v2 5/7] drm/bridge: Add " Torsten Duwe
2019-06-12 9:13 ` Andrzej Hajda
2019-07-18 16:42 ` Torsten Duwe
2019-06-04 12:23 ` [PATCH v2 6/7] dt-bindings: Add ANX6345 DP/eDP transmitter binding Torsten Duwe
2019-06-12 8:16 ` Andrzej Hajda
2019-06-12 14:59 ` Torsten Duwe
2019-06-04 12:23 ` [PATCH v2 7/7] arm64: dts: allwinner: a64: enable ANX6345 bridge on Teres-I Torsten Duwe
2019-06-04 15:08 ` Vasily Khoruzhick
2019-06-05 10:13 ` Torsten Duwe
2019-06-05 12:02 ` Maxime Ripard
2019-06-06 13:59 ` Harald Geyer
2019-06-07 6:28 ` Maxime Ripard
2019-06-07 9:40 ` Torsten Duwe
2019-06-12 10:00 ` Andrzej Hajda
2019-06-12 15:20 ` Maxime Ripard
2019-06-28 10:39 ` Andrzej Hajda
2019-07-01 9:58 ` Maxime Ripard
2019-07-01 12:27 ` Andrzej Hajda
2019-07-02 8:13 ` Maxime Ripard
2019-07-09 0:49 ` Vasily Khoruzhick
2019-07-09 8:55 ` Maxime Ripard
2019-07-09 8:58 ` Icenowy Zheng
2019-07-09 14:21 ` Maxime Ripard
2019-07-09 20:30 ` Vasily Khoruzhick
2019-07-10 11:40 ` Maxime Ripard
2019-07-10 22:11 ` Vasily Khoruzhick
2019-07-12 20:15 ` Maxime Ripard
2019-07-16 0:28 ` Vasily Khoruzhick
2019-07-24 13:58 ` Maxime Ripard
2019-06-12 15:34 ` Maxime Ripard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190604122258.664D468BFE@newverein.lst.de \
--to=duwe@lst.de \
--cc=Laurent.pinchart@ideasonboard.com \
--cc=a.hajda@samsung.com \
--cc=airlied@linux.ie \
--cc=anarsoul@gmail.com \
--cc=daniel@ffwll.ch \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=gregkh@linuxfoundation.org \
--cc=harald@ccbib.org \
--cc=icenowy@aosc.io \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=maxime.ripard@bootlin.com \
--cc=robh+dt@kernel.org \
--cc=seanpaul@chromium.org \
--cc=tglx@linutronix.de \
--cc=thierry.reding@gmail.com \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).