[3/5] ARM: dts: stm32: remove fixed regulator unit address on stm32429i-eval
diff mbox series

Message ID 1560947398-11592-4-git-send-email-fabrice.gasnier@st.com
State New
Headers show
Series
  • Add missing vdda-supply to STM32 ADC
Related show

Commit Message

Fabrice Gasnier June 19, 2019, 12:29 p.m. UTC
vref fixed regulator shouldn't have unit address and reg properties.
Rename the label and phandle to "vref" according to the schematics.
Also remove it from simple-bus.

Fixes: 7465d81191a1 ("ARM: dts: stm32: enable ADC on stm32f429i-eval
board")

Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
---
 arch/arm/boot/dts/stm32429i-eval.dts | 18 ++++++------------
 1 file changed, 6 insertions(+), 12 deletions(-)

Patch
diff mbox series

diff --git a/arch/arm/boot/dts/stm32429i-eval.dts b/arch/arm/boot/dts/stm32429i-eval.dts
index 73ea84d..d79f58f 100644
--- a/arch/arm/boot/dts/stm32429i-eval.dts
+++ b/arch/arm/boot/dts/stm32429i-eval.dts
@@ -81,18 +81,12 @@ 
 		dma-ranges = <0xc0000000 0x0 0x10000000>;
 	};
 
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
-		reg_vref: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "vref";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-		};
+	vref: regulator-vref {
+		compatible = "regulator-fixed";
+		regulator-name = "vref";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
 	};
 
 	leds {
@@ -157,7 +151,7 @@ 
 &adc {
 	pinctrl-names = "default";
 	pinctrl-0 = <&adc3_in8_pin>;
-	vref-supply = <&reg_vref>;
+	vref-supply = <&vref>;
 	status = "okay";
 	adc3: adc@200 {
 		st,adc-channels = <8>;