From: "Paweł Chmiel" <pawel.mikolaj.chmiel@gmail.com>
To: myungjoo.ham@samsung.com
Cc: cw00.choi@samsung.com, robh+dt@kernel.org, mark.rutland@arm.com,
linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
"Tomasz Figa" <tomasz.figa@gmail.com>,
"Paweł Chmiel" <pawel.mikolaj.chmiel@gmail.com>
Subject: [PATCH v2 1/2] dt-bindings: extcon: Add support for fsa9480 switch
Date: Fri, 21 Jun 2019 13:13:51 +0200 [thread overview]
Message-ID: <20190621111352.22976-2-pawel.mikolaj.chmiel@gmail.com> (raw)
In-Reply-To: <20190621111352.22976-1-pawel.mikolaj.chmiel@gmail.com>
From: Tomasz Figa <tomasz.figa@gmail.com>
This patch adds documentation for binding of extcont Fairchild
Semiconductor FSA9480 microusb switch.
This usb port accessory detector and switch, can be found for example in
some Samsung s5pv210 based phones.
Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com>
Signed-off-by: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
---
Changes from v1:
- Added newline at end of file
- Removed interrupt-parent as it is implicit
- Added Acked-by
---
.../bindings/extcon/extcon-fsa9480.txt | 19 +++++++++++++++++++
1 file changed, 19 insertions(+)
create mode 100644 Documentation/devicetree/bindings/extcon/extcon-fsa9480.txt
diff --git a/Documentation/devicetree/bindings/extcon/extcon-fsa9480.txt b/Documentation/devicetree/bindings/extcon/extcon-fsa9480.txt
new file mode 100644
index 000000000000..d592c21245f2
--- /dev/null
+++ b/Documentation/devicetree/bindings/extcon/extcon-fsa9480.txt
@@ -0,0 +1,19 @@
+FAIRCHILD SEMICONDUCTOR FSA9480 MICROUSB SWITCH
+
+The FSA9480 is a USB port accessory detector and switch. The FSA9480 is fully
+controlled using I2C and enables USB data, stereo and mono audio, video,
+microphone, and UART data to use a common connector port.
+
+Required properties:
+ - compatible : Must be "fcs,fsa9480"
+ - reg : Specifies i2c slave address. Must be 0x25.
+ - interrupts : Should contain one entry specifying interrupt signal of
+ interrupt parent to which interrupt pin of the chip is connected.
+
+ Example:
+ musb@25 {
+ compatible = "fcs,fsa9480";
+ reg = <0x25>;
+ interrupt-parent = <&gph2>;
+ interrupts = <7 0>;
+ };
--
2.17.1
next prev parent reply other threads:[~2019-06-21 11:14 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <CGME20190621111402epcas4p2f65fb1b6d3e83bd69bd129b27c90d295@epcas4p2.samsung.com>
2019-06-21 11:13 ` [PATCH v2 0/2] extcon: Add fsa9480 extcon driver Paweł Chmiel
2019-06-21 11:13 ` Paweł Chmiel [this message]
2019-06-21 11:13 ` [PATCH v2 2/2] " Paweł Chmiel
2019-06-22 12:44 ` [PATCH v2 0/2] " Chanwoo Choi
2019-06-23 23:56 ` Chanwoo Choi
2019-06-28 10:28 ` Linus Walleij
2019-06-28 12:37 ` Greg KH
2019-06-28 12:45 ` Paweł Chmiel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190621111352.22976-2-pawel.mikolaj.chmiel@gmail.com \
--to=pawel.mikolaj.chmiel@gmail.com \
--cc=cw00.choi@samsung.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=myungjoo.ham@samsung.com \
--cc=robh+dt@kernel.org \
--cc=tomasz.figa@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).