From: Yangtao Li <tiny.windzz@gmail.com>
To: rui.zhang@intel.com, edubezval@gmail.com,
daniel.lezcano@linaro.org, robh+dt@kernel.org,
mark.rutland@arm.com, maxime.ripard@bootlin.com, wens@csie.org,
davem@davemloft.net, gregkh@linuxfoundation.org,
mchehab+samsung@kernel.org, linus.walleij@linaro.org,
nicolas.ferre@microchip.com, paulmck@linux.ibm.com
Cc: linux-pm@vger.kernel.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, Yangtao Li <tiny.windzz@gmail.com>
Subject: [PATCH v4 09/11] thermal: sun8i: rework for ths calibrate func
Date: Sun, 23 Jun 2019 12:42:04 -0400 [thread overview]
Message-ID: <20190623164206.7467-10-tiny.windzz@gmail.com> (raw)
In-Reply-To: <20190623164206.7467-1-tiny.windzz@gmail.com>
Here, we do something to prepare for the subsequent
support of multiple platforms.
1) rename sun50i_ths_calibrate to sun8i_ths_calibrate, because
this function should be suitable for all platforms now.
2) introduce calibrate callback to mask calibration method
differences.
Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
---
drivers/thermal/sun8i_thermal.c | 86 ++++++++++++++++++---------------
1 file changed, 48 insertions(+), 38 deletions(-)
diff --git a/drivers/thermal/sun8i_thermal.c b/drivers/thermal/sun8i_thermal.c
index 04f53ffb6a14..260b24340f5b 100644
--- a/drivers/thermal/sun8i_thermal.c
+++ b/drivers/thermal/sun8i_thermal.c
@@ -60,6 +60,8 @@ struct ths_thermal_chip {
int scale;
int ft_deviation;
int temp_data_base;
+ int (*calibrate)(struct ths_device *tmdev,
+ u16 *caldata, int callen);
int (*init)(struct ths_device *tmdev);
int (*irq_ack)(struct ths_device *tmdev);
};
@@ -152,45 +154,14 @@ static irqreturn_t sun8i_irq_thread(int irq, void *data)
return IRQ_HANDLED;
}
-static int sun50i_ths_calibrate(struct ths_device *tmdev)
+static int sun50i_h6_ths_calibrate(struct ths_device *tmdev,
+ u16 *caldata, int callen)
{
- struct nvmem_cell *calcell;
struct device *dev = tmdev->dev;
- u16 *caldata;
- size_t callen;
- int ft_temp;
- int i, ret = 0;
-
- calcell = devm_nvmem_cell_get(dev, "calib");
- if (IS_ERR(calcell)) {
- if (PTR_ERR(calcell) == -EPROBE_DEFER)
- return -EPROBE_DEFER;
- /*
- * Even if the external calibration data stored in sid is
- * not accessible, the THS hardware can still work, although
- * the data won't be so accurate.
- *
- * The default value of calibration register is 0x800 for
- * every sensor, and the calibration value is usually 0x7xx
- * or 0x8xx, so they won't be away from the default value
- * for a lot.
- *
- * So here we do not return error if the calibartion data is
- * not available, except the probe needs deferring.
- */
- goto out;
- }
+ int i, ft_temp;
- caldata = nvmem_cell_read(calcell, &callen);
- if (IS_ERR(caldata)) {
- ret = PTR_ERR(caldata);
- goto out;
- }
-
- if (!caldata[0] || callen < 2 + 2 * tmdev->chip->sensor_num) {
- ret = -EINVAL;
- goto out_free;
- }
+ if (!caldata[0] || callen < 2 + 2 * tmdev->chip->sensor_num)
+ return -EINVAL;
/*
* efuse layout:
@@ -251,7 +222,45 @@ static int sun50i_ths_calibrate(struct ths_device *tmdev)
}
}
-out_free:
+ return 0;
+}
+
+static int sun8i_ths_calibrate(struct ths_device *tmdev)
+{
+ struct nvmem_cell *calcell;
+ struct device *dev = tmdev->dev;
+ u16 *caldata;
+ size_t callen;
+ int ret = 0;
+
+ calcell = devm_nvmem_cell_get(dev, "calib");
+ if (IS_ERR(calcell)) {
+ if (PTR_ERR(calcell) == -EPROBE_DEFER)
+ return -EPROBE_DEFER;
+ /*
+ * Even if the external calibration data stored in sid is
+ * not accessible, the THS hardware can still work, although
+ * the data won't be so accurate.
+ *
+ * The default value of calibration register is 0x800 for
+ * every sensor, and the calibration value is usually 0x7xx
+ * or 0x8xx, so they won't be away from the default value
+ * for a lot.
+ *
+ * So here we do not return error if the calibartion data is
+ * not available, except the probe needs deferring.
+ */
+ goto out;
+ }
+
+ caldata = nvmem_cell_read(calcell, &callen);
+ if (IS_ERR(caldata)) {
+ ret = PTR_ERR(caldata);
+ goto out;
+ }
+
+ tmdev->chip->calibrate(tmdev, caldata, callen);
+
kfree(caldata);
out:
return ret;
@@ -300,7 +309,7 @@ static int sun8i_ths_resource_init(struct ths_device *tmdev)
if (ret)
goto bus_disable;
- ret = sun50i_ths_calibrate(tmdev);
+ ret = sun8i_ths_calibrate(tmdev);
if (ret)
goto ahb_disable;
@@ -428,6 +437,7 @@ static const struct ths_thermal_chip sun50i_h6_ths = {
.scale = -67,
.ft_deviation = SUN50I_H6_FT_DEVIATION,
.temp_data_base = SUN50I_H6_THS_TEMP_DATA,
+ .calibrate = sun50i_h6_ths_calibrate,
.init = sun50i_thermal_init,
.irq_ack = sun50i_h6_irq_ack,
};
--
2.17.1
next prev parent reply other threads:[~2019-06-23 16:42 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-06-23 16:41 [PATCH v4 00/11] add thermal driver for h6 Yangtao Li
2019-06-23 16:41 ` [PATCH v4 01/11] thermal: sun8i: " Yangtao Li
2019-06-24 12:07 ` Ondřej Jirman
2019-06-23 16:41 ` [PATCH v4 02/11] dt-bindings: thermal: add binding document for h6 thermal controller Yangtao Li
2019-06-24 8:47 ` Maxime Ripard
2019-06-23 16:41 ` [PATCH v4 03/11] thermal: fix indentation in makefile Yangtao Li
2019-06-23 16:41 ` [PATCH v4 04/11] thermal: sun8i: get ths sensor number from device compatible Yangtao Li
2019-06-23 16:42 ` [PATCH v4 05/11] thermal: sun8i: rework for sun8i_ths_get_temp() Yangtao Li
2019-06-23 16:42 ` [PATCH v4 06/11] thermal: sun8i: get ths init func from device compatible Yangtao Li
2019-06-23 16:42 ` [PATCH v4 07/11] thermal: sun8i: rework for ths irq handler func Yangtao Li
2019-06-23 16:42 ` [PATCH v4 08/11] thermal: sun8i: support ahb clocks Yangtao Li
2019-06-24 18:23 ` Maxime Ripard
2019-06-25 0:34 ` Ondřej Jirman
2019-06-25 8:25 ` Maxime Ripard
2019-06-23 16:42 ` Yangtao Li [this message]
2019-06-23 16:42 ` [PATCH v4 10/11] dt-bindings: thermal: add binding document for h3 thermal controller Yangtao Li
2019-06-24 8:50 ` Maxime Ripard
2019-06-23 16:42 ` [PATCH v4 11/11] thermal: sun8i: add thermal driver for h3 Yangtao Li
2019-06-24 12:05 ` Ondřej Jirman
2019-07-10 23:09 ` [PATCH v4 00/11] add thermal driver for h6 Vasily Khoruzhick
2019-07-13 18:01 ` Vasily Khoruzhick
2019-07-26 17:46 ` Vasily Khoruzhick
2019-07-28 12:11 ` Frank Lee
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190623164206.7467-10-tiny.windzz@gmail.com \
--to=tiny.windzz@gmail.com \
--cc=daniel.lezcano@linaro.org \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=edubezval@gmail.com \
--cc=gregkh@linuxfoundation.org \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=maxime.ripard@bootlin.com \
--cc=mchehab+samsung@kernel.org \
--cc=nicolas.ferre@microchip.com \
--cc=paulmck@linux.ibm.com \
--cc=robh+dt@kernel.org \
--cc=rui.zhang@intel.com \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).