linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Saravana Kannan <saravanak@google.com>
To: Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	"Rafael J. Wysocki" <rafael@kernel.org>,
	Frank Rowand <frowand.list@gmail.com>
Cc: Saravana Kannan <saravanak@google.com>,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	kernel-team@android.com
Subject: [PATCH v2 2/3] of/platform: Add functional dependency link from DT bindings
Date: Thu, 27 Jun 2019 19:22:01 -0700	[thread overview]
Message-ID: <20190628022202.118166-3-saravanak@google.com> (raw)
In-Reply-To: <20190628022202.118166-1-saravanak@google.com>

Add device-links to track functional dependencies between devices
after they are created (but before they are probed) by looking at
their common DT bindings like clocks, interconnects, etc.

Automatically adding device-links to track functional dependencies at
the framework level provides the following benefits:

- Optimizes device probe order and avoids the useless work of
  attempting probes of devices that will not probe successfully
  (because their suppliers aren't present or haven't probed yet).

  For example, in a commonly available mobile SoC, registering just
  one consumer device's driver at an initcall level earlier than the
  supplier device's driver causes 11 failed probe attempts before the
  consumer device probes successfully. This was with a kernel with all
  the drivers statically compiled in. This problem gets a lot worse if
  all the drivers are loaded as modules without direct symbol
  dependencies.

- Supplier devices like clock providers, interconnect providers, etc
  need to keep the resources they provide active and at a particular
  state(s) during boot up even if their current set of consumers don't
  request the resource to be active. This is because the rest of the
  consumers might not have probed yet and turning off the resource
  before all the consumers have probed could lead to a hang or
  undesired user experience.

  Some frameworks (Eg: regulator) handle this today by turning off
  "unused" resources at late_initcall_sync and hoping all the devices
  have probed by then. This is not a valid assumption for systems with
  loadable modules. Other frameworks (Eg: clock) just don't handle
  this due to the lack of a clear signal for when they can turn off
  resources. This leads to downstream hacks to handle cases like this
  that can easily be solved in the upstream kernel.

  By linking devices before they are probed, we give suppliers a clear
  count of the number of dependent consumers. Once all of the
  consumers are active, the suppliers can turn off the unused
  resources without making assumptions about the number of consumers.

By default we just add device-links to track "driver presence" (probe
succeeded) of the supplier device. If any other functionality provided
by device-links are needed, it is left to the consumer/supplier
devices to change the link when they probe.

Signed-off-by: Saravana Kannan <saravanak@google.com>
---
 drivers/of/Kconfig    |  9 ++++++
 drivers/of/platform.c | 73 +++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 82 insertions(+)

diff --git a/drivers/of/Kconfig b/drivers/of/Kconfig
index 37c2ccbefecd..7c7fa7394b4c 100644
--- a/drivers/of/Kconfig
+++ b/drivers/of/Kconfig
@@ -103,4 +103,13 @@ config OF_OVERLAY
 config OF_NUMA
 	bool
 
+config OF_DEVLINKS
+	bool "Device links from DT bindings"
+	help
+	  Common DT bindings like clocks, interconnects, etc represent a
+	  consumer device's dependency on suppliers devices. This option
+	  creates device links from these common bindings so that consumers are
+	  probed only after all their suppliers are active and suppliers can
+	  tell when all their consumers are active.
+
 endif # OF
diff --git a/drivers/of/platform.c b/drivers/of/platform.c
index 04ad312fd85b..8d690fa0f47c 100644
--- a/drivers/of/platform.c
+++ b/drivers/of/platform.c
@@ -61,6 +61,72 @@ struct platform_device *of_find_device_by_node(struct device_node *np)
 EXPORT_SYMBOL(of_find_device_by_node);
 
 #ifdef CONFIG_OF_ADDRESS
+static int of_link_binding(struct device *dev, char *binding, char *cell)
+{
+	struct of_phandle_args sup_args;
+	struct platform_device *sup_dev;
+	unsigned int i = 0, links = 0;
+	u32 dl_flags = DL_FLAG_AUTOPROBE_CONSUMER;
+
+	while (!of_parse_phandle_with_args(dev->of_node, binding, cell, i,
+					   &sup_args)) {
+		i++;
+		sup_dev = of_find_device_by_node(sup_args.np);
+		if (!sup_dev)
+			continue;
+		if (device_link_add(dev, &sup_dev->dev, dl_flags))
+			links++;
+		put_device(&sup_dev->dev);
+	}
+	if (links < i)
+		return -ENODEV;
+	return 0;
+}
+
+/*
+ * List of bindings and their cell names (use NULL if no cell names) from which
+ * device links need to be created.
+ */
+static char *link_bindings[] = {
+#ifdef CONFIG_OF_DEVLINKS
+	"clocks", "#clock-cells",
+	"interconnects", "#interconnect-cells",
+#endif
+};
+
+static int of_link_to_suppliers(struct device *dev)
+{
+	unsigned int i = 0;
+	bool done = true;
+
+	if (unlikely(!dev->of_node))
+		return 0;
+
+	for (i = 0; i < ARRAY_SIZE(link_bindings) / 2; i++)
+		if (of_link_binding(dev, link_bindings[i * 2],
+					link_bindings[i * 2 + 1]))
+			done = false;
+
+	if (!done)
+		return -ENODEV;
+	return 0;
+}
+
+static void link_waiting_consumers_func(struct work_struct *work)
+{
+	device_link_check_waiting_consumers(of_link_to_suppliers);
+}
+static DECLARE_WORK(link_waiting_consumers_work, link_waiting_consumers_func);
+
+static bool link_waiting_consumers_enable;
+static void link_waiting_consumers_trigger(void)
+{
+	if (!link_waiting_consumers_enable)
+		return;
+
+	schedule_work(&link_waiting_consumers_work);
+}
+
 /*
  * The following routines scan a subtree and registers a device for
  * each applicable node.
@@ -192,10 +258,13 @@ static struct platform_device *of_platform_device_create_pdata(
 	dev->dev.platform_data = platform_data;
 	of_msi_configure(&dev->dev, dev->dev.of_node);
 
+	if (of_link_to_suppliers(&dev->dev))
+		device_link_wait_for_supplier(&dev->dev);
 	if (of_device_add(dev) != 0) {
 		platform_device_put(dev);
 		goto err_clear_flag;
 	}
+	link_waiting_consumers_trigger();
 
 	return dev;
 
@@ -541,6 +610,10 @@ static int __init of_platform_default_populate_init(void)
 	/* Populate everything else. */
 	of_platform_default_populate(NULL, NULL, NULL);
 
+	/* Make the device-links between suppliers and consumers */
+	link_waiting_consumers_enable = true;
+	device_link_check_waiting_consumers(of_link_to_suppliers);
+
 	return 0;
 }
 arch_initcall_sync(of_platform_default_populate_init);
-- 
2.22.0.410.gd8fdbe21b5-goog


  parent reply	other threads:[~2019-06-28  2:22 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-06-28  2:21 [PATCH v2 0/3] Solve postboot supplier cleanup and optimize probe ordering Saravana Kannan
2019-06-28  2:22 ` [PATCH v2 1/3] driver core: Add device links support for pending links to suppliers Saravana Kannan
2019-06-28  2:22 ` Saravana Kannan [this message]
2019-06-29  0:55   ` [PATCH v2 2/3] of/platform: Add functional dependency link from DT bindings David Collins
2019-07-01 22:09     ` Saravana Kannan
2019-06-28  2:22 ` [PATCH v2 3/3] driver core: Add sync_state driver/bus callback Saravana Kannan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190628022202.118166-3-saravanak@google.com \
    --to=saravanak@google.com \
    --cc=devicetree@vger.kernel.org \
    --cc=frowand.list@gmail.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=kernel-team@android.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=rafael@kernel.org \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).