linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Yong Wu <yong.wu@mediatek.com>
To: Joerg Roedel <joro@8bytes.org>,
	Matthias Brugger <matthias.bgg@gmail.com>,
	Robin Murphy <robin.murphy@arm.com>,
	Rob Herring <robh+dt@kernel.org>
Cc: Evan Green <evgreen@chromium.org>, Tomasz Figa <tfiga@google.com>,
	Will Deacon <will.deacon@arm.com>,
	<linux-mediatek@lists.infradead.org>,
	<srv_heupstream@mediatek.com>, <devicetree@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<iommu@lists.linux-foundation.org>, <yingjoe.chen@mediatek.com>,
	<yong.wu@mediatek.com>, <youlin.pei@mediatek.com>,
	Nicolas Boichat <drinkcat@chromium.org>, <anan.sun@mediatek.com>,
	Matthias Kaehlcke <mka@chromium.org>
Subject: [PATCH v8 14/21] iommu/mediatek: Add mt8183 IOMMU support
Date: Sat, 29 Jun 2019 10:39:48 +0800	[thread overview]
Message-ID: <1561775995-24963-15-git-send-email-yong.wu@mediatek.com> (raw)
In-Reply-To: <1561775995-24963-11-git-send-email-yong.wu@mediatek.com>

The M4U IP blocks in mt8183 is MediaTek's generation2 M4U which use
the ARM Short-descriptor like mt8173, and most of the HW registers
are the same.

Here list main differences between mt8183 and mt8173/mt2712:
1) mt8183 has only one M4U HW like mt8173 while mt2712 has two.
2) mt8183 don't have the "bclk" clock, it use the EMI clock instead.
3) mt8183 can support the dram over 4GB, but it doesn't call this "4GB
mode".
4) mt8183 pgtable base register(0x0) extend bit[1:0] which represent
the bit[33:32] in the physical address of the pgtable base, But the
standard ttbr0[1] means the S bit which is enabled defaultly, Hence,
we add a mask.
5) mt8183 HW has a GALS modules, SMI should enable "has_gals" support.
6) mt8183 need reset_axi like mt8173.
7) the larb-id in smi-common is remapped. M4U should add its larbid_remap.

Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Evan Green <evgreen@chromium.org>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
---
 drivers/iommu/mtk_iommu.c | 15 ++++++++++++---
 drivers/iommu/mtk_iommu.h |  1 +
 drivers/memory/mtk-smi.c  | 20 ++++++++++++++++++++
 3 files changed, 33 insertions(+), 3 deletions(-)

diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
index c5482dc..c518212 100644
--- a/drivers/iommu/mtk_iommu.c
+++ b/drivers/iommu/mtk_iommu.c
@@ -36,6 +36,7 @@
 #include "mtk_iommu.h"
 
 #define REG_MMU_PT_BASE_ADDR			0x000
+#define MMU_PT_ADDR_MASK			GENMASK(31, 7)
 
 #define REG_MMU_INVALIDATE			0x020
 #define F_ALL_INVLD				0x2
@@ -355,7 +356,7 @@ static int mtk_iommu_attach_device(struct iommu_domain *domain,
 	/* Update the pgtable base address register of the M4U HW */
 	if (!data->m4u_dom) {
 		data->m4u_dom = dom;
-		writel(dom->cfg.arm_v7s_cfg.ttbr[0],
+		writel(dom->cfg.arm_v7s_cfg.ttbr[0] & MMU_PT_ADDR_MASK,
 		       data->base + REG_MMU_PT_BASE_ADDR);
 	}
 
@@ -735,6 +736,7 @@ static int __maybe_unused mtk_iommu_resume(struct device *dev)
 {
 	struct mtk_iommu_data *data = dev_get_drvdata(dev);
 	struct mtk_iommu_suspend_reg *reg = &data->reg;
+	struct mtk_iommu_domain *m4u_dom = data->m4u_dom;
 	void __iomem *base = data->base;
 	int ret;
 
@@ -750,8 +752,8 @@ static int __maybe_unused mtk_iommu_resume(struct device *dev)
 	writel_relaxed(reg->int_control0, base + REG_MMU_INT_CONTROL0);
 	writel_relaxed(reg->int_main_control, base + REG_MMU_INT_MAIN_CONTROL);
 	writel_relaxed(reg->ivrp_paddr, base + REG_MMU_IVRP_PADDR);
-	if (data->m4u_dom)
-		writel(data->m4u_dom->cfg.arm_v7s_cfg.ttbr[0],
+	if (m4u_dom)
+		writel(m4u_dom->cfg.arm_v7s_cfg.ttbr[0] & MMU_PT_ADDR_MASK,
 		       base + REG_MMU_PT_BASE_ADDR);
 	return 0;
 }
@@ -776,9 +778,16 @@ static int __maybe_unused mtk_iommu_resume(struct device *dev)
 	.larbid_remap = {0, 1, 2, 3, 4, 5}, /* Linear mapping. */
 };
 
+static const struct mtk_iommu_plat_data mt8183_data = {
+	.m4u_plat     = M4U_MT8183,
+	.reset_axi    = true,
+	.larbid_remap = {0, 4, 5, 6, 7, 2, 3, 1},
+};
+
 static const struct of_device_id mtk_iommu_of_ids[] = {
 	{ .compatible = "mediatek,mt2712-m4u", .data = &mt2712_data},
 	{ .compatible = "mediatek,mt8173-m4u", .data = &mt8173_data},
+	{ .compatible = "mediatek,mt8183-m4u", .data = &mt8183_data},
 	{}
 };
 
diff --git a/drivers/iommu/mtk_iommu.h b/drivers/iommu/mtk_iommu.h
index ed94fbd..47063d4 100644
--- a/drivers/iommu/mtk_iommu.h
+++ b/drivers/iommu/mtk_iommu.h
@@ -38,6 +38,7 @@ enum mtk_iommu_plat {
 	M4U_MT2701,
 	M4U_MT2712,
 	M4U_MT8173,
+	M4U_MT8183,
 };
 
 struct mtk_iommu_plat_data {
diff --git a/drivers/memory/mtk-smi.c b/drivers/memory/mtk-smi.c
index 91634d7..a430721 100644
--- a/drivers/memory/mtk-smi.c
+++ b/drivers/memory/mtk-smi.c
@@ -285,6 +285,13 @@ static void mtk_smi_larb_config_port_gen1(struct device *dev)
 	.larb_direct_to_common_mask = BIT(8) | BIT(9),      /* bdpsys */
 };
 
+static const struct mtk_smi_larb_gen mtk_smi_larb_mt8183 = {
+	.has_gals                   = true,
+	.config_port                = mtk_smi_larb_config_port_gen2_general,
+	.larb_direct_to_common_mask = BIT(2) | BIT(3) | BIT(7),
+				      /* IPU0 | IPU1 | CCU */
+};
+
 static const struct of_device_id mtk_smi_larb_of_ids[] = {
 	{
 		.compatible = "mediatek,mt8173-smi-larb",
@@ -298,6 +305,10 @@ static void mtk_smi_larb_config_port_gen1(struct device *dev)
 		.compatible = "mediatek,mt2712-smi-larb",
 		.data = &mtk_smi_larb_mt2712
 	},
+	{
+		.compatible = "mediatek,mt8183-smi-larb",
+		.data = &mtk_smi_larb_mt8183
+	},
 	{}
 };
 
@@ -391,6 +402,11 @@ static int mtk_smi_larb_remove(struct platform_device *pdev)
 	.gen = MTK_SMI_GEN2,
 };
 
+static const struct mtk_smi_common_plat mtk_smi_common_mt8183 = {
+	.gen      = MTK_SMI_GEN2,
+	.has_gals = true,
+};
+
 static const struct of_device_id mtk_smi_common_of_ids[] = {
 	{
 		.compatible = "mediatek,mt8173-smi-common",
@@ -404,6 +420,10 @@ static int mtk_smi_larb_remove(struct platform_device *pdev)
 		.compatible = "mediatek,mt2712-smi-common",
 		.data = &mtk_smi_common_gen2,
 	},
+	{
+		.compatible = "mediatek,mt8183-smi-common",
+		.data = &mtk_smi_common_mt8183,
+	},
 	{}
 };
 
-- 
1.9.1


  parent reply	other threads:[~2019-06-29  2:41 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-06-29  2:39 [PATCH v8 10/21] iommu/mediatek: Refine protect memory definition Yong Wu
2019-06-29  2:39 ` [PATCH v8 11/21] iommu/mediatek: Move reset_axi into plat_data Yong Wu
2019-06-29  2:39 ` [PATCH v8 12/21] iommu/mediatek: Move vld_pa_rng " Yong Wu
2019-06-29  2:39 ` [PATCH v8 13/21] memory: mtk-smi: Add gals support Yong Wu
2019-06-29  2:39 ` Yong Wu [this message]
2019-06-29  2:39 ` [PATCH v8 15/21] iommu/mediatek: Add mmu1 support Yong Wu
2019-06-29  2:39 ` [PATCH v8 16/21] memory: mtk-smi: Invoke pm runtime_callback to enable clocks Yong Wu
2019-06-29  2:39 ` [PATCH v8 17/21] memory: mtk-smi: Add bus_sel for mt8183 Yong Wu
2019-06-29  2:39 ` [PATCH v8 18/21] iommu/mediatek: Fix VLD_PA_RNG register backup when suspend Yong Wu
2019-06-29  2:39 ` [PATCH v8 19/21] memory: mtk-smi: Get rid of need_larbid Yong Wu
2019-06-29  2:39 ` [PATCH v8 20/21] iommu/mediatek: Clean up struct mtk_smi_iommu Yong Wu
2019-06-29  2:39 ` [PATCH v8 21/21] iommu/mediatek: Switch to SPDX license identifier Yong Wu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1561775995-24963-15-git-send-email-yong.wu@mediatek.com \
    --to=yong.wu@mediatek.com \
    --cc=anan.sun@mediatek.com \
    --cc=devicetree@vger.kernel.org \
    --cc=drinkcat@chromium.org \
    --cc=evgreen@chromium.org \
    --cc=iommu@lists.linux-foundation.org \
    --cc=joro@8bytes.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=matthias.bgg@gmail.com \
    --cc=mka@chromium.org \
    --cc=robh+dt@kernel.org \
    --cc=robin.murphy@arm.com \
    --cc=srv_heupstream@mediatek.com \
    --cc=tfiga@google.com \
    --cc=will.deacon@arm.com \
    --cc=yingjoe.chen@mediatek.com \
    --cc=youlin.pei@mediatek.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).