linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Oded Gabbay <oded.gabbay@gmail.com>
To: gregkh@linuxfoundation.org
Cc: linux-kernel@vger.kernel.org
Subject: [git pull v2] habanalabs pull request for kernel 5.3
Date: Thu, 4 Jul 2019 09:58:43 +0300	[thread overview]
Message-ID: <20190704065843.GA21559@ogabbay-VM> (raw)

Hello Greg,

This is v2 of the pull request for habanalabs driver for kernel 5.3.

v2 contains the missing sign-off-by tags for the relevant commits.

The commits mostly contains improvements to the existing code base.
Nothing too exciting this time.

Please see the tag message for details on what this pull request contains.

Thanks,
Oded

The following changes since commit 60e8523e2ea18dc0c0cea69d6c1d69a065019062:

  ocxl: Allow contexts to be attached with a NULL mm (2019-07-03 21:29:47 +0200)

are available in the Git repository at:

  git://people.freedesktop.org/~gabbayo/linux tags/misc-habanalabs-next-2019-07-04

for you to fetch changes up to e8960ca06bb22d0d84edf246b0bf395e8322e127:

  habanalabs: Add busy engines bitmask to HW idle IOCTL (2019-07-01 13:59:45 +0000)

----------------------------------------------------------------
This tag contains the following changes for kernel 5.3:

- Change the way the device's CPU access the host memory. This allows the
  driver to use the kernel API of setting DMA mask in a standard way (call
  it once).

- Add a new debugfs entry to show the status of the internal DMA and
  compute engines. This is very helpful for debugging in case a command
  submission get stuck.

- Return to the user a mask of the internal engines indicating their busy
  state.

- Make sure to restore registers that can be modified by the user to their
  default values. Only applies to registers that are initialized by the
  driver.

- Elimination of redundant and dead-code.

- Support memset of the device's memory with size larger then 4GB

- Force the user to set the device to debug mode before configuring the
  device's coresight infrastructure

- Improve error printing in case of interrupts from the device

----------------------------------------------------------------
Dalit Ben Zoor (3):
      habanalabs: make tpc registers secured
      habanalabs: clear sobs and monitors in context switch
      habanalabs: restore unsecured registers default values

Oded Gabbay (20):
      habanalabs: improve a couple of error messages
      habanalabs: force user to set device debug mode
      habanalabs: remove dead code in habanalabs_drv.c
      habanalabs: check to load F/W before boot status
      habanalabs: remove redundant CB size adjustment
      habanalabs: remove redundant memory clear
      habanalabs: change polling functions to macros
      habanalabs: pass device pointer to asic-specific function
      habanalabs: support device memory memset > 4GB
      habanalabs: don't limit packet size for device CPU
      habanalabs: remove simulator dedicated code
      habanalabs: add rate-limit to an error message
      docs/habanalabs: update text for some entries in sysfs
      habanalabs: initialize device CPU queues after MMU init
      habanalabs: de-couple MMU and VM module initialization
      habanalabs: initialize MMU context for driver
      habanalabs: add MMU mappings for Goya CPU
      habanalabs: set Goya CPU to use ASIC MMU
      habanalabs: remove DMA mask hack for Goya
      habanalabs: add WARN in case of bad MMU mapping

Omer Shpigelman (4):
      habanalabs: remove redundant CPU checks
      habanalabs: minor documentation and prints fixes
      habanalabs: increase PCI ELBI timeout for Palladium
      habanalabs: print event name for fatal and non-RAZWI events

Tomer Tayar (4):
      habanalabs: Allow accessing host mapped addresses via debugfs
      habanalabs: Update the device idle check
      habanalabs: Add debugfs node for engines status
      habanalabs: Add busy engines bitmask to HW idle IOCTL

 .../ABI/testing/debugfs-driver-habanalabs          |  18 +-
 Documentation/ABI/testing/sysfs-driver-habanalabs  |  42 +-
 drivers/misc/habanalabs/asid.c                     |   2 +-
 drivers/misc/habanalabs/command_submission.c       |  10 +-
 drivers/misc/habanalabs/context.c                  |  11 +-
 drivers/misc/habanalabs/debugfs.c                  |  54 +-
 drivers/misc/habanalabs/device.c                   | 189 +++---
 drivers/misc/habanalabs/firmware_if.c              |  51 +-
 drivers/misc/habanalabs/goya/goya.c                | 635 +++++++++++++++------
 drivers/misc/habanalabs/goya/goyaP.h               |  16 +-
 drivers/misc/habanalabs/goya/goya_security.c       |  16 +
 drivers/misc/habanalabs/habanalabs.h               |  93 ++-
 drivers/misc/habanalabs/habanalabs_drv.c           |  66 ++-
 drivers/misc/habanalabs/habanalabs_ioctl.c         |  11 +-
 drivers/misc/habanalabs/hw_queue.c                 |   2 +-
 .../include/goya/asic_reg/dma_ch_0_masks.h         | 418 ++++++++++++++
 .../habanalabs/include/goya/asic_reg/goya_regs.h   |   1 +
 drivers/misc/habanalabs/memory.c                   |  13 +-
 drivers/misc/habanalabs/mmu.c                      |  20 +-
 drivers/misc/habanalabs/pci.c                      |  10 +-
 drivers/misc/habanalabs/sysfs.c                    |   4 -
 include/uapi/misc/habanalabs.h                     |  30 +-
 22 files changed, 1249 insertions(+), 463 deletions(-)
 create mode 100644 drivers/misc/habanalabs/include/goya/asic_reg/dma_ch_0_masks.h

             reply	other threads:[~2019-07-04  6:59 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-07-04  6:58 Oded Gabbay [this message]
2019-07-04  8:21 ` [git pull v2] habanalabs pull request for kernel 5.3 Greg KH

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190704065843.GA21559@ogabbay-VM \
    --to=oded.gabbay@gmail.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).