[v7,net-next,4/5] net: ethernet: ti: cpsw_ethtool: allow res split while down
diff mbox series

Message ID 20190704231406.27083-5-ivan.khoronzhuk@linaro.org
State Superseded
Headers show
Series
  • net: ethernet: ti: cpsw: Add XDP support
Related show

Commit Message

Ivan Khoronzhuk July 4, 2019, 11:14 p.m. UTC
That's possible to set channel num while interfaces are down. When
interface gets up it should resplit budget. This resplit can happen
after phy is up but only if speed is changed, so should be set before
this, for this allow it to happen while changing number of channels,
when interfaces are down.

Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
---
 drivers/net/ethernet/ti/cpsw_ethtool.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

Patch
diff mbox series

diff --git a/drivers/net/ethernet/ti/cpsw_ethtool.c b/drivers/net/ethernet/ti/cpsw_ethtool.c
index c477e6b620d6..e4d7185fde49 100644
--- a/drivers/net/ethernet/ti/cpsw_ethtool.c
+++ b/drivers/net/ethernet/ti/cpsw_ethtool.c
@@ -620,8 +620,7 @@  int cpsw_set_channels_common(struct net_device *ndev,
 		}
 	}
 
-	if (cpsw->usage_count)
-		cpsw_split_res(cpsw);
+	cpsw_split_res(cpsw);
 
 	ret = cpsw_resume_data_pass(ndev);
 	if (!ret)