From: Jiangfeng Xiao <xiaojiangfeng@huawei.com>
To: <robh+dt@kernel.org>, <mark.rutland@arm.com>,
<yisen.zhuang@huawei.com>, <salil.mehta@huawei.com>,
<dingtianhong@huawei.com>, <xiaojiangfeng@huawei.com>
Cc: <davem@davemloft.net>, <netdev@vger.kernel.org>,
<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<leeyou.li@huawei.com>, <xiekunxun@huawei.com>,
<jianping.liu@huawei.com>, <nixiaoming@huawei.com>
Subject: [PATCH 06/10] net: hisilicon: dt-bindings: Add an field of port-handle
Date: Fri, 5 Jul 2019 14:11:46 +0800 [thread overview]
Message-ID: <1562307106-103760-1-git-send-email-xiaojiangfeng@huawei.com> (raw)
In general, group is the same as the port, but some
boards specify a special group for better load
balancing of each processing unit.
Signed-off-by: Jiangfeng Xiao <xiaojiangfeng@huawei.com>
---
Documentation/devicetree/bindings/net/hisilicon-hip04-net.txt | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/Documentation/devicetree/bindings/net/hisilicon-hip04-net.txt b/Documentation/devicetree/bindings/net/hisilicon-hip04-net.txt
index d1df8a0..464c0da 100644
--- a/Documentation/devicetree/bindings/net/hisilicon-hip04-net.txt
+++ b/Documentation/devicetree/bindings/net/hisilicon-hip04-net.txt
@@ -10,6 +10,7 @@ Required properties:
phandle, specifies a reference to the syscon ppe node
port, port number connected to the controller
channel, recv channel start from channel * number (RX_DESC_NUM)
+ group, field in the pkg desc, in general, it is the same as the port.
- phy-mode: see ethernet.txt [1].
Optional properties:
@@ -66,7 +67,7 @@ Example:
reg = <0x28b0000 0x10000>;
interrupts = <0 413 4>;
phy-mode = "mii";
- port-handle = <&ppe 31 0>;
+ port-handle = <&ppe 31 0 31>;
};
ge0: ethernet@2800000 {
@@ -74,7 +75,7 @@ Example:
reg = <0x2800000 0x10000>;
interrupts = <0 402 4>;
phy-mode = "sgmii";
- port-handle = <&ppe 0 1>;
+ port-handle = <&ppe 0 1 0>;
phy-handle = <&phy0>;
};
@@ -83,6 +84,6 @@ Example:
reg = <0x2880000 0x10000>;
interrupts = <0 410 4>;
phy-mode = "sgmii";
- port-handle = <&ppe 8 2>;
+ port-handle = <&ppe 8 2 8>;
phy-handle = <&phy1>;
};
--
1.8.5.6
reply other threads:[~2019-07-05 6:12 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1562307106-103760-1-git-send-email-xiaojiangfeng@huawei.com \
--to=xiaojiangfeng@huawei.com \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=dingtianhong@huawei.com \
--cc=jianping.liu@huawei.com \
--cc=leeyou.li@huawei.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=netdev@vger.kernel.org \
--cc=nixiaoming@huawei.com \
--cc=robh+dt@kernel.org \
--cc=salil.mehta@huawei.com \
--cc=xiekunxun@huawei.com \
--cc=yisen.zhuang@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).