From: Jiangfeng Xiao <xiaojiangfeng@huawei.com>
To: <yisen.zhuang@huawei.com>, <salil.mehta@huawei.com>,
<dingtianhong@huawei.com>, <xiaojiangfeng@huawei.com>
Cc: <davem@davemloft.net>, <robh+dt@kernel.org>,
<mark.rutland@arm.com>, <netdev@vger.kernel.org>,
<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<leeyou.li@huawei.com>, <xiekunxun@huawei.com>,
<jianping.liu@huawei.com>, <nixiaoming@huawei.com>
Subject: [PATCH 10/10] net: hisilicon: Add an tx_desc to adapt HI13X1_GMAC
Date: Fri, 5 Jul 2019 14:12:42 +0800 [thread overview]
Message-ID: <1562307162-103916-1-git-send-email-xiaojiangfeng@huawei.com> (raw)
HI13X1 changed the offsets and bitmaps for tx_desc
registers in the same peripheral device on different
models of the hip04_eth.
Signed-off-by: Jiangfeng Xiao <xiaojiangfeng@huawei.com>
---
drivers/net/ethernet/hisilicon/hip04_eth.c | 34 +++++++++++++++++++++++++++---
1 file changed, 31 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/hisilicon/hip04_eth.c b/drivers/net/ethernet/hisilicon/hip04_eth.c
index 780fc46..6256357 100644
--- a/drivers/net/ethernet/hisilicon/hip04_eth.c
+++ b/drivers/net/ethernet/hisilicon/hip04_eth.c
@@ -76,8 +76,15 @@
/* TX descriptor config */
#define TX_FREE_MEM BIT(0)
#define TX_READ_ALLOC_L3 BIT(1)
-#define TX_FINISH_CACHE_INV BIT(2)
+#if defined(CONFIG_HI13X1_GMAC)
+#define TX_CLEAR_WB BIT(7)
+#define TX_RELEASE_TO_PPE BIT(4)
+#define TX_FINISH_CACHE_INV BIT(6)
+#define TX_POOL_SHIFT 16
+#else
#define TX_CLEAR_WB BIT(4)
+#define TX_FINISH_CACHE_INV BIT(2)
+#endif
#define TX_L3_CHECKSUM BIT(5)
#define TX_LOOP_BACK BIT(11)
@@ -124,6 +131,7 @@
/* buf unit size is cache_line_size, which is 64, so the shift is 6 */
#define PPE_BUF_SIZE_SHIFT 6
#define PPE_TX_BUF_HOLD BIT(31)
+#define CACHE_LINE_MASK 0x3F
#else
#define PPE_CFG_QOS_VMID_GRP_SHIFT 8
#define PPE_CFG_RX_CTRL_ALIGN_SHIFT 11
@@ -163,11 +171,22 @@
#define HIP04_MIN_TX_COALESCE_FRAMES 100
struct tx_desc {
+#if defined(CONFIG_HI13X1_GMAC)
+ u32 reserved1[2];
+ u32 send_addr;
+ u16 send_size;
+ u16 data_offset;
+ u32 reserved2[7];
+ u32 cfg;
+ u32 wb_addr;
+ u32 reserved3[3];
+#else
u32 send_addr;
u32 send_size;
u32 next_addr;
u32 cfg;
u32 wb_addr;
+#endif
} __aligned(64);
struct rx_desc {
@@ -505,11 +524,20 @@ static void hip04_start_tx_timer(struct hip04_priv *priv)
priv->tx_skb[tx_head] = skb;
priv->tx_phys[tx_head] = phys;
- desc->send_addr = (__force u32)cpu_to_be32(phys);
+
desc->send_size = (__force u32)cpu_to_be32(skb->len);
+#if defined(CONFIG_HI13X1_GMAC)
+ desc->cfg = (__force u32)cpu_to_be32(TX_CLEAR_WB | TX_FINISH_CACHE_INV
+ | TX_RELEASE_TO_PPE | priv->port << TX_POOL_SHIFT);
+ desc->data_offset = (__force u32)cpu_to_be32(phys & CACHE_LINE_MASK);
+ desc->send_addr = (__force u32)cpu_to_be32(phys & ~CACHE_LINE_MASK);
+#else
desc->cfg = (__force u32)cpu_to_be32(TX_CLEAR_WB | TX_FINISH_CACHE_INV);
+ desc->send_addr = (__force u32)cpu_to_be32(phys);
+#endif
phys = priv->tx_desc_dma + tx_head * sizeof(struct tx_desc);
- desc->wb_addr = (__force u32)cpu_to_be32(phys);
+ desc->wb_addr = (__force u32)cpu_to_be32(phys +
+ offsetof(struct tx_desc, send_addr));
skb_tx_timestamp(skb);
hip04_set_xmit_desc(priv, phys);
--
1.8.5.6
reply other threads:[~2019-07-05 6:13 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1562307162-103916-1-git-send-email-xiaojiangfeng@huawei.com \
--to=xiaojiangfeng@huawei.com \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=dingtianhong@huawei.com \
--cc=jianping.liu@huawei.com \
--cc=leeyou.li@huawei.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=netdev@vger.kernel.org \
--cc=nixiaoming@huawei.com \
--cc=robh+dt@kernel.org \
--cc=salil.mehta@huawei.com \
--cc=xiekunxun@huawei.com \
--cc=yisen.zhuang@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).