From: Stefan Riedmueller <s.riedmueller@phytec.de>
To: shawnguo@kernel.org, s.hauer@pengutronix.de, robh+dt@kernel.org,
mark.rutland@arm.com
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, martyn.welch@collabora.com,
kernel@pengutronix.de, festevam@gmail.com, linux-imx@nxp.com
Subject: [PATCH 02/10] ARM: dts: imx6ul: segin: Add boot media to dts filename
Date: Tue, 9 Jul 2019 09:19:19 +0200 [thread overview]
Message-ID: <1562656767-273566-3-git-send-email-s.riedmueller@phytec.de> (raw)
In-Reply-To: <1562656767-273566-1-git-send-email-s.riedmueller@phytec.de>
There is now a PHYTEC phyCORE-i.MX 6UL with eMMC instead of NAND flash
available. The dts filename needs to reflect that to differentiate both.
Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
---
arch/arm/boot/dts/Makefile | 2 +-
...l-phytec-segin-ff-rdk.dts => imx6ul-phytec-segin-ff-rdk-nand.dts} | 5 +++--
2 files changed, 4 insertions(+), 3 deletions(-)
rename arch/arm/boot/dts/{imx6ul-phytec-segin-ff-rdk.dts => imx6ul-phytec-segin-ff-rdk-nand.dts} (85%)
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index e1924b06f3cb..668b57c8cc57 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -573,7 +573,7 @@ dtb-$(CONFIG_SOC_IMX6UL) += \
imx6ul-opos6uldev.dtb \
imx6ul-pico-hobbit.dtb \
imx6ul-pico-pi.dtb \
- imx6ul-phytec-segin-ff-rdk.dtb \
+ imx6ul-phytec-segin-ff-rdk-nand.dtb \
imx6ul-tx6ul-0010.dtb \
imx6ul-tx6ul-0011.dtb \
imx6ul-tx6ul-mainboard.dtb \
diff --git a/arch/arm/boot/dts/imx6ul-phytec-segin-ff-rdk.dts b/arch/arm/boot/dts/imx6ul-phytec-segin-ff-rdk-nand.dts
similarity index 85%
rename from arch/arm/boot/dts/imx6ul-phytec-segin-ff-rdk.dts
rename to arch/arm/boot/dts/imx6ul-phytec-segin-ff-rdk-nand.dts
index 1e59183a2f7c..dc06029c5701 100644
--- a/arch/arm/boot/dts/imx6ul-phytec-segin-ff-rdk.dts
+++ b/arch/arm/boot/dts/imx6ul-phytec-segin-ff-rdk-nand.dts
@@ -10,8 +10,9 @@
#include "imx6ul-phytec-segin-peb-eval-01.dtsi"
/ {
- model = "PHYTEC phyBOARD-Segin i.MX6 UltraLite Full Featured";
- compatible = "phytec,imx6ul-pbacd10", "phytec,imx6ul-pcl063", "fsl,imx6ul";
+ model = "PHYTEC phyBOARD-Segin i.MX6 UltraLite Full Featured with NAND";
+ compatible = "phytec,imx6ul-pbacd10-nand", "phytec,imx6ul-pbacd10",
+ "phytec,imx6ul-pcl063", "fsl,imx6ul";
};
&adc1 {
--
2.7.4
next prev parent reply other threads:[~2019-07-09 7:34 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-07-09 7:19 [PATCH 00/10] Add further support for PHYTEC phyBOARD-Segin Stefan Riedmueller
2019-07-09 7:19 ` [PATCH 01/10] ARM: dts: imx6ul: phyboard-segin: Rename dts to PHYTEC name scheme Stefan Riedmueller
2019-07-09 7:19 ` Stefan Riedmueller [this message]
2019-07-23 3:10 ` [PATCH 02/10] ARM: dts: imx6ul: segin: Add boot media to dts filename Shawn Guo
2019-07-09 7:19 ` [PATCH 03/10] ARM: dts: imx6ul: segin: Reduce eth drive strength Stefan Riedmueller
2019-07-09 7:19 ` [PATCH 04/10] ARM: dts: imx6ul: segin: Fix LED naming for phyCORE and PEB-EVAL-01 Stefan Riedmueller
2019-07-09 7:19 ` [PATCH 05/10] ARM: dts: imx6ul: segin: Make FEC and ethphy configurable in dts Stefan Riedmueller
2019-07-09 7:19 ` [PATCH 06/10] ARM: dts: imx6ul: segin: Only enable NAND if it is populated Stefan Riedmueller
2019-07-09 7:19 ` [PATCH 07/10] ARM: dts: imx6ul: phycore: Add eMMC at usdhc2 Stefan Riedmueller
2019-07-09 7:19 ` [PATCH 08/10] ARM: dts: imx6ul: segin: Move ECSPI interface to board include file Stefan Riedmueller
2019-07-09 7:19 ` [PATCH 09/10] ARM: dts: imx6ul: segin: Move machine include to dts files Stefan Riedmueller
2019-07-09 7:19 ` [PATCH 10/10] ARM: dts: imx6ull: Add support for PHYTEC phyBOARD-Segin with i.MX 6ULL Stefan Riedmueller
2019-07-23 5:39 ` [PATCH 00/10] Add further support for PHYTEC phyBOARD-Segin Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1562656767-273566-3-git-send-email-s.riedmueller@phytec.de \
--to=s.riedmueller@phytec.de \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=martyn.welch@collabora.com \
--cc=robh+dt@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).