linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Stefan Riedmueller <s.riedmueller@phytec.de>
To: shawnguo@kernel.org, s.hauer@pengutronix.de, robh+dt@kernel.org,
	mark.rutland@arm.com
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org, martyn.welch@collabora.com,
	kernel@pengutronix.de, festevam@gmail.com, linux-imx@nxp.com
Subject: [PATCH 05/10] ARM: dts: imx6ul: segin: Make FEC and ethphy configurable in dts
Date: Tue, 9 Jul 2019 09:19:22 +0200	[thread overview]
Message-ID: <1562656767-273566-6-git-send-email-s.riedmueller@phytec.de> (raw)
In-Reply-To: <1562656767-273566-1-git-send-email-s.riedmueller@phytec.de>

To disable Ethernet interfaces in case they are not populated
make the FEC and Ethernet PHY status configurable in the dts files.

Also change the Ethernet PHYs labels to make them correspond to
the MDIO address.

Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
---
 arch/arm/boot/dts/imx6ul-phytec-phycore-som.dtsi      |  7 ++++---
 arch/arm/boot/dts/imx6ul-phytec-segin-ff-rdk-nand.dts | 12 ++++++++++++
 arch/arm/boot/dts/imx6ul-phytec-segin.dtsi            |  5 +++--
 3 files changed, 19 insertions(+), 5 deletions(-)

diff --git a/arch/arm/boot/dts/imx6ul-phytec-phycore-som.dtsi b/arch/arm/boot/dts/imx6ul-phytec-phycore-som.dtsi
index 73266b4a889b..fee7a7e938ee 100644
--- a/arch/arm/boot/dts/imx6ul-phytec-phycore-som.dtsi
+++ b/arch/arm/boot/dts/imx6ul-phytec-phycore-som.dtsi
@@ -42,20 +42,21 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet1>;
 	phy-mode = "rmii";
-	phy-handle = <&ethphy0>;
-	status = "okay";
+	phy-handle = <&ethphy1>;
+	status = "disabled";
 
 	mdio: mdio {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		ethphy0: ethernet-phy@1 {
+		ethphy1: ethernet-phy@1 {
 			reg = <1>;
 			interrupt-parent = <&gpio1>;
 			interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 			micrel,led-mode = <1>;
 			clocks = <&clks IMX6UL_CLK_ENET_REF>;
 			clock-names = "rmii-ref";
+			status = "disabled";
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/imx6ul-phytec-segin-ff-rdk-nand.dts b/arch/arm/boot/dts/imx6ul-phytec-segin-ff-rdk-nand.dts
index dc06029c5701..81a82dd65019 100644
--- a/arch/arm/boot/dts/imx6ul-phytec-segin-ff-rdk-nand.dts
+++ b/arch/arm/boot/dts/imx6ul-phytec-segin-ff-rdk-nand.dts
@@ -34,6 +34,18 @@
 	status = "okay";
 };
 
+&ethphy1 {
+	status = "okay";
+};
+
+&ethphy2 {
+	status = "okay";
+};
+
+&fec1 {
+	status = "okay";
+};
+
 &fec2 {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx6ul-phytec-segin.dtsi b/arch/arm/boot/dts/imx6ul-phytec-segin.dtsi
index 28ba3a4c4c74..7cd24ec40c36 100644
--- a/arch/arm/boot/dts/imx6ul-phytec-segin.dtsi
+++ b/arch/arm/boot/dts/imx6ul-phytec-segin.dtsi
@@ -107,7 +107,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet2>;
 	phy-mode = "rmii";
-	phy-handle = <&ethphy1>;
+	phy-handle = <&ethphy2>;
 	status = "disabled";
 };
 
@@ -160,11 +160,12 @@
 };
 
 &mdio {
-	ethphy1: ethernet-phy@2 {
+	ethphy2: ethernet-phy@2 {
 		reg = <2>;
 		micrel,led-mode = <1>;
 		clocks = <&clks IMX6UL_CLK_ENET2_REF>;
 		clock-names = "rmii-ref";
+		status = "disabled";
 	};
 };
 
-- 
2.7.4


  parent reply	other threads:[~2019-07-09  7:34 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-07-09  7:19 [PATCH 00/10] Add further support for PHYTEC phyBOARD-Segin Stefan Riedmueller
2019-07-09  7:19 ` [PATCH 01/10] ARM: dts: imx6ul: phyboard-segin: Rename dts to PHYTEC name scheme Stefan Riedmueller
2019-07-09  7:19 ` [PATCH 02/10] ARM: dts: imx6ul: segin: Add boot media to dts filename Stefan Riedmueller
2019-07-23  3:10   ` Shawn Guo
2019-07-09  7:19 ` [PATCH 03/10] ARM: dts: imx6ul: segin: Reduce eth drive strength Stefan Riedmueller
2019-07-09  7:19 ` [PATCH 04/10] ARM: dts: imx6ul: segin: Fix LED naming for phyCORE and PEB-EVAL-01 Stefan Riedmueller
2019-07-09  7:19 ` Stefan Riedmueller [this message]
2019-07-09  7:19 ` [PATCH 06/10] ARM: dts: imx6ul: segin: Only enable NAND if it is populated Stefan Riedmueller
2019-07-09  7:19 ` [PATCH 07/10] ARM: dts: imx6ul: phycore: Add eMMC at usdhc2 Stefan Riedmueller
2019-07-09  7:19 ` [PATCH 08/10] ARM: dts: imx6ul: segin: Move ECSPI interface to board include file Stefan Riedmueller
2019-07-09  7:19 ` [PATCH 09/10] ARM: dts: imx6ul: segin: Move machine include to dts files Stefan Riedmueller
2019-07-09  7:19 ` [PATCH 10/10] ARM: dts: imx6ull: Add support for PHYTEC phyBOARD-Segin with i.MX 6ULL Stefan Riedmueller
2019-07-23  5:39 ` [PATCH 00/10] Add further support for PHYTEC phyBOARD-Segin Shawn Guo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1562656767-273566-6-git-send-email-s.riedmueller@phytec.de \
    --to=s.riedmueller@phytec.de \
    --cc=devicetree@vger.kernel.org \
    --cc=festevam@gmail.com \
    --cc=kernel@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-imx@nxp.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=martyn.welch@collabora.com \
    --cc=robh+dt@kernel.org \
    --cc=s.hauer@pengutronix.de \
    --cc=shawnguo@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).