From: Stefan Riedmueller <s.riedmueller@phytec.de>
To: shawnguo@kernel.org, s.hauer@pengutronix.de, robh+dt@kernel.org,
mark.rutland@arm.com
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, martyn.welch@collabora.com,
kernel@pengutronix.de, festevam@gmail.com, linux-imx@nxp.com
Subject: [PATCH 01/10] ARM: dts: imx6ul: phyboard-segin: Rename dts to PHYTEC name scheme
Date: Tue, 9 Jul 2019 09:19:18 +0200 [thread overview]
Message-ID: <1562656767-273566-2-git-send-email-s.riedmueller@phytec.de> (raw)
In-Reply-To: <1562656767-273566-1-git-send-email-s.riedmueller@phytec.de>
Use the same name scheme for the phyBOARD-Segin and the phyCORE-i.MX
6UL as is used for the PHYTEC phyBOARD-Mira and phyCORE-i.MX 6.
This is only a cosmetic change and there is no functional change
intended.
Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
---
arch/arm/boot/dts/Makefile | 2 +-
.../{imx6ul-phytec-pcl063.dtsi => imx6ul-phytec-phycore-som.dtsi} | 2 +-
...tec-phyboard-segin-full.dts => imx6ul-phytec-segin-ff-rdk.dts} | 8 ++++----
...ytec-peb-eval-01.dtsi => imx6ul-phytec-segin-peb-eval-01.dtsi} | 0
...imx6ul-phytec-phyboard-segin.dtsi => imx6ul-phytec-segin.dtsi} | 2 +-
5 files changed, 7 insertions(+), 7 deletions(-)
rename arch/arm/boot/dts/{imx6ul-phytec-pcl063.dtsi => imx6ul-phytec-phycore-som.dtsi} (98%)
rename arch/arm/boot/dts/{imx6ul-phytec-phyboard-segin-full.dts => imx6ul-phytec-segin-ff-rdk.dts} (84%)
rename arch/arm/boot/dts/{imx6ul-phytec-peb-eval-01.dtsi => imx6ul-phytec-segin-peb-eval-01.dtsi} (100%)
rename arch/arm/boot/dts/{imx6ul-phytec-phyboard-segin.dtsi => imx6ul-phytec-segin.dtsi} (99%)
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index dab2914fa293..e1924b06f3cb 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -573,7 +573,7 @@ dtb-$(CONFIG_SOC_IMX6UL) += \
imx6ul-opos6uldev.dtb \
imx6ul-pico-hobbit.dtb \
imx6ul-pico-pi.dtb \
- imx6ul-phytec-phyboard-segin-full.dtb \
+ imx6ul-phytec-segin-ff-rdk.dtb \
imx6ul-tx6ul-0010.dtb \
imx6ul-tx6ul-0011.dtb \
imx6ul-tx6ul-mainboard.dtb \
diff --git a/arch/arm/boot/dts/imx6ul-phytec-pcl063.dtsi b/arch/arm/boot/dts/imx6ul-phytec-phycore-som.dtsi
similarity index 98%
rename from arch/arm/boot/dts/imx6ul-phytec-pcl063.dtsi
rename to arch/arm/boot/dts/imx6ul-phytec-phycore-som.dtsi
index fc2997449b49..bff13d0eb064 100644
--- a/arch/arm/boot/dts/imx6ul-phytec-pcl063.dtsi
+++ b/arch/arm/boot/dts/imx6ul-phytec-phycore-som.dtsi
@@ -10,7 +10,7 @@
#include "imx6ul.dtsi"
/ {
- model = "Phytec phyCORE i.MX6 UltraLite";
+ model = "PHYTEC phyCORE-i.MX6 UltraLite";
compatible = "phytec,imx6ul-pcl063", "fsl,imx6ul";
chosen {
diff --git a/arch/arm/boot/dts/imx6ul-phytec-phyboard-segin-full.dts b/arch/arm/boot/dts/imx6ul-phytec-segin-ff-rdk.dts
similarity index 84%
rename from arch/arm/boot/dts/imx6ul-phytec-phyboard-segin-full.dts
rename to arch/arm/boot/dts/imx6ul-phytec-segin-ff-rdk.dts
index b6a1407a9d44..1e59183a2f7c 100644
--- a/arch/arm/boot/dts/imx6ul-phytec-phyboard-segin-full.dts
+++ b/arch/arm/boot/dts/imx6ul-phytec-segin-ff-rdk.dts
@@ -5,12 +5,12 @@
*/
/dts-v1/;
-#include "imx6ul-phytec-pcl063.dtsi"
-#include "imx6ul-phytec-phyboard-segin.dtsi"
-#include "imx6ul-phytec-peb-eval-01.dtsi"
+#include "imx6ul-phytec-phycore-som.dtsi"
+#include "imx6ul-phytec-segin.dtsi"
+#include "imx6ul-phytec-segin-peb-eval-01.dtsi"
/ {
- model = "Phytec phyBOARD-Segin i.MX6 UltraLite Full Featured";
+ model = "PHYTEC phyBOARD-Segin i.MX6 UltraLite Full Featured";
compatible = "phytec,imx6ul-pbacd10", "phytec,imx6ul-pcl063", "fsl,imx6ul";
};
diff --git a/arch/arm/boot/dts/imx6ul-phytec-peb-eval-01.dtsi b/arch/arm/boot/dts/imx6ul-phytec-segin-peb-eval-01.dtsi
similarity index 100%
rename from arch/arm/boot/dts/imx6ul-phytec-peb-eval-01.dtsi
rename to arch/arm/boot/dts/imx6ul-phytec-segin-peb-eval-01.dtsi
diff --git a/arch/arm/boot/dts/imx6ul-phytec-phyboard-segin.dtsi b/arch/arm/boot/dts/imx6ul-phytec-segin.dtsi
similarity index 99%
rename from arch/arm/boot/dts/imx6ul-phytec-phyboard-segin.dtsi
rename to arch/arm/boot/dts/imx6ul-phytec-segin.dtsi
index 7bf439a77d2c..78425c3290a1 100644
--- a/arch/arm/boot/dts/imx6ul-phytec-phyboard-segin.dtsi
+++ b/arch/arm/boot/dts/imx6ul-phytec-segin.dtsi
@@ -5,7 +5,7 @@
*/
/ {
- model = "Phytec phyBOARD-Segin i.MX6 UltraLite";
+ model = "PHYTEC phyBOARD-Segin i.MX6 UltraLite";
compatible = "phytec,imx6ul-pbacd-10", "phytec,imx6ul-pcl063", "fsl,imx6ul";
aliases {
--
2.7.4
next prev parent reply other threads:[~2019-07-09 7:35 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-07-09 7:19 [PATCH 00/10] Add further support for PHYTEC phyBOARD-Segin Stefan Riedmueller
2019-07-09 7:19 ` Stefan Riedmueller [this message]
2019-07-09 7:19 ` [PATCH 02/10] ARM: dts: imx6ul: segin: Add boot media to dts filename Stefan Riedmueller
2019-07-23 3:10 ` Shawn Guo
2019-07-09 7:19 ` [PATCH 03/10] ARM: dts: imx6ul: segin: Reduce eth drive strength Stefan Riedmueller
2019-07-09 7:19 ` [PATCH 04/10] ARM: dts: imx6ul: segin: Fix LED naming for phyCORE and PEB-EVAL-01 Stefan Riedmueller
2019-07-09 7:19 ` [PATCH 05/10] ARM: dts: imx6ul: segin: Make FEC and ethphy configurable in dts Stefan Riedmueller
2019-07-09 7:19 ` [PATCH 06/10] ARM: dts: imx6ul: segin: Only enable NAND if it is populated Stefan Riedmueller
2019-07-09 7:19 ` [PATCH 07/10] ARM: dts: imx6ul: phycore: Add eMMC at usdhc2 Stefan Riedmueller
2019-07-09 7:19 ` [PATCH 08/10] ARM: dts: imx6ul: segin: Move ECSPI interface to board include file Stefan Riedmueller
2019-07-09 7:19 ` [PATCH 09/10] ARM: dts: imx6ul: segin: Move machine include to dts files Stefan Riedmueller
2019-07-09 7:19 ` [PATCH 10/10] ARM: dts: imx6ull: Add support for PHYTEC phyBOARD-Segin with i.MX 6ULL Stefan Riedmueller
2019-07-23 5:39 ` [PATCH 00/10] Add further support for PHYTEC phyBOARD-Segin Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1562656767-273566-2-git-send-email-s.riedmueller@phytec.de \
--to=s.riedmueller@phytec.de \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=martyn.welch@collabora.com \
--cc=robh+dt@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).