From: Maxime Ripard <maxime.ripard@bootlin.com>
To: Hans Verkuil <hans.verkuil@cisco.com>,
Sakari Ailus <sakari.ailus@linux.intel.com>,
Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>,
Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
linux-media@vger.kernel.org, Chen-Yu Tsai <wens@csie.org>,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
Mark Rutland <mark.rutland@arm.com>,
Rob Herring <robh+dt@kernel.org>,
Frank Rowand <frowand.list@gmail.com>,
Maxime Ripard <maxime.ripard@bootlin.com>
Subject: [PATCH v6 2/5] media: sunxi: Refactor the Makefile and Kconfig
Date: Thu, 11 Jul 2019 14:15:04 +0200 [thread overview]
Message-ID: <a68df210e89e53e58e6bb2da64f634e8598066ae.1562847292.git-series.maxime.ripard@bootlin.com> (raw)
In-Reply-To: <cover.34bcd988943a26671681eaf849aacab51fab1cfe.1562847292.git-series.maxime.ripard@bootlin.com>
The Makefile and Kconfig for the sun6i CSI driver are included in the main
Makefile / KConfig file. Since we're going to add a new CSI driver for an
older chip, and the Cedrus driver eventually, it makes more sense to put
those in our directory.
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
---
drivers/media/platform/Kconfig | 2 +-
drivers/media/platform/Makefile | 2 +-
drivers/media/platform/sunxi/Kconfig | 1 +
drivers/media/platform/sunxi/Makefile | 1 +
4 files changed, 4 insertions(+), 2 deletions(-)
create mode 100644 drivers/media/platform/sunxi/Kconfig
create mode 100644 drivers/media/platform/sunxi/Makefile
diff --git a/drivers/media/platform/Kconfig b/drivers/media/platform/Kconfig
index 8a19654b393a..2abf4ea8b9b1 100644
--- a/drivers/media/platform/Kconfig
+++ b/drivers/media/platform/Kconfig
@@ -146,7 +146,7 @@ source "drivers/media/platform/am437x/Kconfig"
source "drivers/media/platform/xilinx/Kconfig"
source "drivers/media/platform/rcar-vin/Kconfig"
source "drivers/media/platform/atmel/Kconfig"
-source "drivers/media/platform/sunxi/sun6i-csi/Kconfig"
+source "drivers/media/platform/sunxi/Kconfig"
config VIDEO_TI_CAL
tristate "TI CAL (Camera Adaptation Layer) driver"
diff --git a/drivers/media/platform/Makefile b/drivers/media/platform/Makefile
index 7cbbd925124c..6ee7eb0d36f4 100644
--- a/drivers/media/platform/Makefile
+++ b/drivers/media/platform/Makefile
@@ -100,4 +100,4 @@ obj-y += meson/
obj-y += cros-ec-cec/
-obj-$(CONFIG_VIDEO_SUN6I_CSI) += sunxi/sun6i-csi/
+obj-y += sunxi/
diff --git a/drivers/media/platform/sunxi/Kconfig b/drivers/media/platform/sunxi/Kconfig
new file mode 100644
index 000000000000..1b6e89cb78b2
--- /dev/null
+++ b/drivers/media/platform/sunxi/Kconfig
@@ -0,0 +1 @@
+source "drivers/media/platform/sunxi/sun6i-csi/Kconfig"
diff --git a/drivers/media/platform/sunxi/Makefile b/drivers/media/platform/sunxi/Makefile
new file mode 100644
index 000000000000..8d06f98500ee
--- /dev/null
+++ b/drivers/media/platform/sunxi/Makefile
@@ -0,0 +1 @@
+obj-y += sun6i-csi/
--
git-series 0.9.1
next prev parent reply other threads:[~2019-07-11 12:15 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-07-11 12:15 [PATCH v6 0/5] media: Allwinner A10 CSI support Maxime Ripard
2019-07-11 12:15 ` [PATCH v6 1/5] dt-bindings: media: Add Allwinner A10 CSI binding Maxime Ripard
2019-08-15 8:34 ` Chen-Yu Tsai
2019-09-15 8:54 ` Chen-Yu Tsai
2019-10-01 8:52 ` Maxime Ripard
2019-10-01 9:04 ` Chen-Yu Tsai
2019-10-02 14:49 ` Maxime Ripard
2019-07-11 12:15 ` Maxime Ripard [this message]
2019-07-11 12:15 ` [PATCH v6 3/5] media: sunxi: Add A10 CSI driver Maxime Ripard
2019-07-11 12:15 ` [PATCH v6 4/5] ARM: dts: sun7i: Add CSI0 controller Maxime Ripard
2019-07-11 12:15 ` [PATCH v6 5/5] DO NOT MERGE: ARM: dts: bananapi: Add Camera support Maxime Ripard
2019-07-24 12:39 ` [PATCH v6 0/5] media: Allwinner A10 CSI support Maxime Ripard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=a68df210e89e53e58e6bb2da64f634e8598066ae.1562847292.git-series.maxime.ripard@bootlin.com \
--to=maxime.ripard@bootlin.com \
--cc=devicetree@vger.kernel.org \
--cc=frowand.list@gmail.com \
--cc=hans.verkuil@cisco.com \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=mchehab@kernel.org \
--cc=robh+dt@kernel.org \
--cc=sakari.ailus@linux.intel.com \
--cc=thomas.petazzoni@bootlin.com \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).