From: Baolin Wang <baolin.wang@linaro.org>
To: adrian.hunter@intel.com, ulf.hansson@linaro.org,
zhang.lyra@gmail.com, orsonzhai@gmail.com
Cc: baolin.wang@linaro.org, vincent.guittot@linaro.org,
linux-mmc@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v2] mmc: host: sdhci-sprd: Fix the incorrect soft reset operation when runtime resuming
Date: Tue, 16 Jul 2019 15:31:39 +0800 [thread overview]
Message-ID: <b9cba2452c0166ef2fa69514d6ac8fbe7ee02883.1563259454.git.baolin.wang@linaro.org> (raw)
In sdhci_runtime_resume_host() function, we will always do software reset
for all, which will cause Spreadtrum host controller work abnormally after
resuming.
Thus for Spreadtrum platform that do not power down the SD/eMMC card during
runtime suspend, we should not do software reset for all. To fix this
issue, adding a specific reset operation that add one condition to validate
the MMC_CAP_AGGRESSIVE_PM to decide if we can do software reset for all or
just reset command and data lines.
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
---
Changes from v1:
- Add a specific reset operation instead of changing the core to avoid
affecting other hardware.
---
drivers/mmc/host/sdhci-sprd.c | 38 +++++++++++++++++++++++++++++++++++++-
1 file changed, 37 insertions(+), 1 deletion(-)
diff --git a/drivers/mmc/host/sdhci-sprd.c b/drivers/mmc/host/sdhci-sprd.c
index 603a5d9..174b566 100644
--- a/drivers/mmc/host/sdhci-sprd.c
+++ b/drivers/mmc/host/sdhci-sprd.c
@@ -373,6 +373,42 @@ static unsigned int sdhci_sprd_get_max_timeout_count(struct sdhci_host *host)
return 1 << 31;
}
+static void sdhci_sprd_reset(struct sdhci_host *host, u8 mask)
+{
+ struct mmc_host *mmc = host->mmc;
+ ktime_t timeout;
+
+ /*
+ * When try to reset controller after runtime suspend, we should not
+ * reset for all if the SD/eMMC card is not power down, just reset
+ * command and data lines instead. Otherwise will meet some strange
+ * behaviors for Spreadtrum host controller.
+ */
+ if (host->runtime_suspended && (mask & SDHCI_RESET_ALL) &&
+ !(mmc->caps & MMC_CAP_AGGRESSIVE_PM))
+ mask = SDHCI_RESET_CMD | SDHCI_RESET_DATA;
+
+ sdhci_writeb(host, mask, SDHCI_SOFTWARE_RESET);
+
+ /* Wait max 100 ms */
+ timeout = ktime_add_ms(ktime_get(), 100);
+
+ /* hw clears the bit when it's done */
+ while (1) {
+ bool timedout = ktime_after(ktime_get(), timeout);
+
+ if (!(sdhci_readb(host, SDHCI_SOFTWARE_RESET) & mask))
+ break;
+ if (timedout) {
+ pr_err("%s: Reset 0x%x never completed.\n",
+ mmc_hostname(host->mmc), (int)mask);
+ sdhci_dumpregs(host);
+ return;
+ }
+ udelay(10);
+ }
+}
+
static struct sdhci_ops sdhci_sprd_ops = {
.read_l = sdhci_sprd_readl,
.write_l = sdhci_sprd_writel,
@@ -381,7 +417,7 @@ static unsigned int sdhci_sprd_get_max_timeout_count(struct sdhci_host *host)
.get_max_clock = sdhci_sprd_get_max_clock,
.get_min_clock = sdhci_sprd_get_min_clock,
.set_bus_width = sdhci_set_bus_width,
- .reset = sdhci_reset,
+ .reset = sdhci_sprd_reset,
.set_uhs_signaling = sdhci_sprd_set_uhs_signaling,
.hw_reset = sdhci_sprd_hw_reset,
.get_max_timeout_count = sdhci_sprd_get_max_timeout_count,
--
1.7.9.5
next reply other threads:[~2019-07-16 7:32 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-07-16 7:31 Baolin Wang [this message]
2019-07-16 8:22 ` [PATCH v2] mmc: host: sdhci-sprd: Fix the incorrect soft reset operation when runtime resuming Adrian Hunter
2019-07-16 8:28 ` Baolin Wang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=b9cba2452c0166ef2fa69514d6ac8fbe7ee02883.1563259454.git.baolin.wang@linaro.org \
--to=baolin.wang@linaro.org \
--cc=adrian.hunter@intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mmc@vger.kernel.org \
--cc=orsonzhai@gmail.com \
--cc=ulf.hansson@linaro.org \
--cc=vincent.guittot@linaro.org \
--cc=zhang.lyra@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).