From: Masahiro Yamada <yamada.masahiro@socionext.com>
To: linux-kbuild@vger.kernel.org
Cc: Stephen Rothwell <sfr@canb.auug.org.au>,
Masahiro Yamada <yamada.masahiro@socionext.com>,
linux-kernel@vger.kernel.org
Subject: [PATCH v2] kbuild: update compile-test headers for v5.3-rc1
Date: Wed, 17 Jul 2019 15:29:13 +0900 [thread overview]
Message-ID: <20190717062913.11437-1-yamada.masahiro@socionext.com> (raw)
- Some headers graduated from the blacklist
- hyperv_timer.h joined the header-test when CONFIG_X86=y
- nf_tables*.h joined the header-test when CONFIG_NF_TABLES is
enabled.
- The entry for nf_tables_offload.h was added to fix build error for
the combination of CONFIG_NF_TABLES=n and CONFIG_KERNEL_HEADER_TEST=y.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
---
Changes in v2:
- Remove rdma_counter.h from the exclude list
include/Kbuild | 13 +++++--------
usr/include/Makefile | 8 --------
2 files changed, 5 insertions(+), 16 deletions(-)
diff --git a/include/Kbuild b/include/Kbuild
index 7e9f1acb9dd5..8c71f906d322 100644
--- a/include/Kbuild
+++ b/include/Kbuild
@@ -31,7 +31,7 @@ header-test- += acpi/platform/acintel.h
header-test- += acpi/platform/aclinux.h
header-test- += acpi/platform/aclinuxex.h
header-test- += acpi/processor.h
-header-test- += clocksource/hyperv_timer.h
+header-test-$(CONFIG_X86) += clocksource/hyperv_timer.h
header-test- += clocksource/timer-sp804.h
header-test- += crypto/cast_common.h
header-test- += crypto/internal/cryptouser.h
@@ -454,9 +454,6 @@ header-test- += linux/phy/omap_control_phy.h
header-test- += linux/phy/tegra/xusb.h
header-test- += linux/phy/ulpi_phy.h
header-test- += linux/phy_fixed.h
-header-test- += linux/pinctrl/pinconf-generic.h
-header-test- += linux/pinctrl/pinconf.h
-header-test- += linux/pinctrl/pinctrl.h
header-test- += linux/pipe_fs_i.h
header-test- += linux/pktcdvd.h
header-test- += linux/pl320-ipc.h
@@ -905,10 +902,11 @@ header-test- += net/netfilter/nf_nat_redirect.h
header-test- += net/netfilter/nf_queue.h
header-test- += net/netfilter/nf_reject.h
header-test- += net/netfilter/nf_synproxy.h
-header-test- += net/netfilter/nf_tables.h
-header-test- += net/netfilter/nf_tables_core.h
-header-test- += net/netfilter/nf_tables_ipv4.h
+header-test-$(CONFIG_NF_TABLES) += net/netfilter/nf_tables.h
+header-test-$(CONFIG_NF_TABLES) += net/netfilter/nf_tables_core.h
+header-test-$(CONFIG_NF_TABLES) += net/netfilter/nf_tables_ipv4.h
header-test- += net/netfilter/nf_tables_ipv6.h
+header-test-$(CONFIG_NF_TABLES) += net/netfilter/nf_tables_offload.h
header-test- += net/netfilter/nft_fib.h
header-test- += net/netfilter/nft_meta.h
header-test- += net/netfilter/nft_reject.h
@@ -949,7 +947,6 @@ header-test- += pcmcia/ds.h
header-test- += rdma/ib.h
header-test- += rdma/iw_portmap.h
header-test- += rdma/opa_port_info.h
-header-test- += rdma/rdma_counter.h
header-test- += rdma/rdmavt_cq.h
header-test- += rdma/restrack.h
header-test- += rdma/signature.h
diff --git a/usr/include/Makefile b/usr/include/Makefile
index cd8daa20d487..aa316d99e035 100644
--- a/usr/include/Makefile
+++ b/usr/include/Makefile
@@ -30,8 +30,6 @@ header-test-$(CONFIG_CPU_BIG_ENDIAN) += linux/byteorder/big_endian.h
header-test-$(CONFIG_CPU_LITTLE_ENDIAN) += linux/byteorder/little_endian.h
header-test- += linux/coda.h
header-test- += linux/coda_psdev.h
-header-test- += linux/dvb/audio.h
-header-test- += linux/dvb/osd.h
header-test- += linux/elfcore.h
header-test- += linux/errqueue.h
header-test- += linux/fsmap.h
@@ -44,7 +42,6 @@ header-test- += linux/netfilter_bridge/ebtables.h
header-test- += linux/netfilter_ipv4/ipt_LOG.h
header-test- += linux/netfilter_ipv6/ip6t_LOG.h
header-test- += linux/nfc.h
-header-test- += linux/nilfs2_ondisk.h
header-test- += linux/omap3isp.h
header-test- += linux/omapfb.h
header-test- += linux/patchkey.h
@@ -59,9 +56,6 @@ header-test- += linux/v4l2-mediabus.h
header-test- += linux/v4l2-subdev.h
header-test- += linux/videodev2.h
header-test- += linux/vm_sockets.h
-header-test- += misc/ocxl.h
-header-test- += mtd/mtd-abi.h
-header-test- += mtd/mtd-user.h
header-test- += scsi/scsi_bsg_fc.h
header-test- += scsi/scsi_netlink.h
header-test- += scsi/scsi_netlink_fc.h
@@ -108,7 +102,6 @@ header-test- += linux/bpf_perf_event.h
endif
ifeq ($(SRCARCH),s390)
-header-test- += asm/runtime_instr.h
header-test- += asm/zcrypt.h
endif
@@ -116,7 +109,6 @@ ifeq ($(SRCARCH),sparc)
header-test- += asm/stat.h
header-test- += asm/uctx.h
header-test- += asm/fbio.h
-header-test- += asm/openpromio.h
endif
# asm-generic/*.h is used by asm/*.h, and should not be included directly
--
2.17.1
reply other threads:[~2019-07-17 6:29 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190717062913.11437-1-yamada.masahiro@socionext.com \
--to=yamada.masahiro@socionext.com \
--cc=linux-kbuild@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=sfr@canb.auug.org.au \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).