linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Andrey Smirnov <andrew.smirnov@gmail.com>
To: linux-crypto@vger.kernel.org
Cc: "Andrey Smirnov" <andrew.smirnov@gmail.com>,
	"Horia Geantă" <horia.geanta@nxp.com>,
	"Chris Spencer" <christopher.spencer@sea.co.uk>,
	"Cory Tusar" <cory.tusar@zii.aero>,
	"Chris Healy" <cphealy@gmail.com>,
	"Lucas Stach" <l.stach@pengutronix.de>,
	"Aymen Sghaier" <aymen.sghaier@nxp.com>,
	"Leonard Crestez" <leonard.crestez@nxp.com>,
	linux-kernel@vger.kernel.org
Subject: [PATCH v6 01/14] crypto: caam - move DMA mask selection into a function
Date: Wed, 17 Jul 2019 08:24:45 -0700	[thread overview]
Message-ID: <20190717152458.22337-2-andrew.smirnov@gmail.com> (raw)
In-Reply-To: <20190717152458.22337-1-andrew.smirnov@gmail.com>

Exactly the same code to figure out DMA mask is repeated twice in the
driver code. To avoid repetition, move that logic into a standalone
subroutine in intern.h. While at it re-shuffle the code to make it
more readable with early returns.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Cc: Chris Spencer <christopher.spencer@sea.co.uk>
Cc: Cory Tusar <cory.tusar@zii.aero>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Horia Geantă <horia.geanta@nxp.com>
Cc: Aymen Sghaier <aymen.sghaier@nxp.com>
Cc: Leonard Crestez <leonard.crestez@nxp.com>
Cc: linux-crypto@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
---
 drivers/crypto/caam/ctrl.c   | 11 +----------
 drivers/crypto/caam/intern.h | 20 ++++++++++++++++++++
 drivers/crypto/caam/jr.c     | 15 +--------------
 3 files changed, 22 insertions(+), 24 deletions(-)

diff --git a/drivers/crypto/caam/ctrl.c b/drivers/crypto/caam/ctrl.c
index 4e43ca4d3656..e674d8770cdb 100644
--- a/drivers/crypto/caam/ctrl.c
+++ b/drivers/crypto/caam/ctrl.c
@@ -688,16 +688,7 @@ static int caam_probe(struct platform_device *pdev)
 			      JRSTART_JR1_START | JRSTART_JR2_START |
 			      JRSTART_JR3_START);
 
-	if (sizeof(dma_addr_t) == sizeof(u64)) {
-		if (caam_dpaa2)
-			ret = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(49));
-		else if (of_device_is_compatible(nprop, "fsl,sec-v5.0"))
-			ret = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(40));
-		else
-			ret = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(36));
-	} else {
-		ret = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(32));
-	}
+	ret = dma_set_mask_and_coherent(dev, caam_get_dma_mask(dev));
 	if (ret) {
 		dev_err(dev, "dma_set_mask_and_coherent failed (%d)\n", ret);
 		goto iounmap_ctrl;
diff --git a/drivers/crypto/caam/intern.h b/drivers/crypto/caam/intern.h
index 6af84bbc612c..ec25d260fa40 100644
--- a/drivers/crypto/caam/intern.h
+++ b/drivers/crypto/caam/intern.h
@@ -10,6 +10,8 @@
 #ifndef INTERN_H
 #define INTERN_H
 
+#include "ctrl.h"
+
 /* Currently comes from Kconfig param as a ^2 (driver-required) */
 #define JOBR_DEPTH (1 << CONFIG_CRYPTO_DEV_FSL_CAAM_RINGSIZE)
 
@@ -215,4 +217,22 @@ DEFINE_SIMPLE_ATTRIBUTE(caam_fops_u32_ro, caam_debugfs_u32_get, NULL, "%llu\n");
 DEFINE_SIMPLE_ATTRIBUTE(caam_fops_u64_ro, caam_debugfs_u64_get, NULL, "%llu\n");
 #endif
 
+static inline u64 caam_get_dma_mask(struct device *dev)
+{
+	struct device_node *nprop = dev->of_node;
+
+	if (sizeof(dma_addr_t) != sizeof(u64))
+		return DMA_BIT_MASK(32);
+
+	if (caam_dpaa2)
+		return DMA_BIT_MASK(49);
+
+	if (of_device_is_compatible(nprop, "fsl,sec-v5.0-job-ring") ||
+	    of_device_is_compatible(nprop, "fsl,sec-v5.0"))
+		return DMA_BIT_MASK(40);
+
+	return DMA_BIT_MASK(36);
+}
+
+
 #endif /* INTERN_H */
diff --git a/drivers/crypto/caam/jr.c b/drivers/crypto/caam/jr.c
index cea811fed320..4b25b2fa3d02 100644
--- a/drivers/crypto/caam/jr.c
+++ b/drivers/crypto/caam/jr.c
@@ -543,20 +543,7 @@ static int caam_jr_probe(struct platform_device *pdev)
 
 	jrpriv->rregs = (struct caam_job_ring __iomem __force *)ctrl;
 
-	if (sizeof(dma_addr_t) == sizeof(u64)) {
-		if (caam_dpaa2)
-			error = dma_set_mask_and_coherent(jrdev,
-							  DMA_BIT_MASK(49));
-		else if (of_device_is_compatible(nprop,
-						 "fsl,sec-v5.0-job-ring"))
-			error = dma_set_mask_and_coherent(jrdev,
-							  DMA_BIT_MASK(40));
-		else
-			error = dma_set_mask_and_coherent(jrdev,
-							  DMA_BIT_MASK(36));
-	} else {
-		error = dma_set_mask_and_coherent(jrdev, DMA_BIT_MASK(32));
-	}
+	error = dma_set_mask_and_coherent(jrdev, caam_get_dma_mask(jrdev));
 	if (error) {
 		dev_err(jrdev, "dma_set_mask_and_coherent failed (%d)\n",
 			error);
-- 
2.21.0


  reply	other threads:[~2019-07-17 15:26 UTC|newest]

Thread overview: 29+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-07-17 15:24 [PATCH v6 00/14] crypto: caam - Add i.MX8MQ support Andrey Smirnov
2019-07-17 15:24 ` Andrey Smirnov [this message]
2019-07-17 15:24 ` [PATCH v6 02/14] crypto: caam - simplfy clock initialization Andrey Smirnov
2019-07-23 14:17   ` Horia Geanta
2019-08-12 17:56     ` Andrey Smirnov
2019-07-17 15:24 ` [PATCH v6 03/14] crypto: caam - convert caam_jr_init() to use devres Andrey Smirnov
2019-07-23 15:48   ` Horia Geanta
2019-07-17 15:24 ` [PATCH v6 04/14] crypto: caam - request JR IRQ as the last step Andrey Smirnov
2019-07-23 16:02   ` Horia Geanta
2019-08-12 17:59     ` Andrey Smirnov
2019-07-17 15:24 ` [PATCH v6 05/14] crytpo: caam - make use of iowrite64*_hi_lo in wr_reg64 Andrey Smirnov
2019-07-29 15:29   ` Horia Geanta
2019-07-17 15:24 ` [PATCH v6 06/14] crypto: caam - use ioread64*_hi_lo in rd_reg64 Andrey Smirnov
2019-07-29 15:32   ` Horia Geanta
2019-07-17 15:24 ` [PATCH v6 07/14] crypto: caam - drop 64-bit only wr/rd_reg64() Andrey Smirnov
2019-07-29 15:32   ` Horia Geanta
2019-07-17 15:24 ` [PATCH v6 08/14] crypto: caam - make CAAM_PTR_SZ dynamic Andrey Smirnov
2019-07-23  9:57   ` Horia Geanta
2019-08-12 17:56     ` Andrey Smirnov
2019-07-17 15:24 ` [PATCH v6 09/14] crypto: caam - move cpu_to_caam_dma() selection to runtime Andrey Smirnov
2019-07-17 15:24 ` [PATCH v6 10/14] crypto: caam - drop explicit usage of struct jr_outentry Andrey Smirnov
2019-07-17 15:24 ` [PATCH v6 11/14] crypto: caam - don't hardcode inpentry size Andrey Smirnov
2019-07-17 15:24 ` [PATCH v6 12/14] crypto: caam - force DMA address to 32-bit on 64-bit i.MX SoCs Andrey Smirnov
2019-08-05  8:23   ` Horia Geanta
2019-08-12 19:27     ` Andrey Smirnov
2019-08-13 13:38       ` Horia Geanta
2019-08-13 18:50         ` Andrey Smirnov
2019-07-17 15:24 ` [PATCH v6 13/14] crypto: caam - always select job ring via RSR on i.MX8MQ Andrey Smirnov
2019-07-17 15:24 ` [PATCH v6 14/14] crypto: caam - add clock entry for i.MX8MQ Andrey Smirnov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190717152458.22337-2-andrew.smirnov@gmail.com \
    --to=andrew.smirnov@gmail.com \
    --cc=aymen.sghaier@nxp.com \
    --cc=christopher.spencer@sea.co.uk \
    --cc=cory.tusar@zii.aero \
    --cc=cphealy@gmail.com \
    --cc=horia.geanta@nxp.com \
    --cc=l.stach@pengutronix.de \
    --cc=leonard.crestez@nxp.com \
    --cc=linux-crypto@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).