[RFC,4/4] arm64: mm: set direct_dma_min_mask according to dma-ranges
diff mbox series

Message ID 20190717153135.15507-5-nsaenzjulienne@suse.de
State New
Headers show
Series
  • Raspberry Pi 4 DMA addressing support
Related show

Commit Message

Nicolas Saenz Julienne July 17, 2019, 3:31 p.m. UTC
Now that we parse the dma-ranges during initialization we can fine-tune
the DMA mask used by the direct DMA implementation.

We set the mask based on the size of the DMA addressable memory, and if
bigger than 4GB we force it to DMA_BIT_MASK(32) as it's always been.

Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
---
 arch/arm64/mm/init.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

Patch
diff mbox series

diff --git a/arch/arm64/mm/init.c b/arch/arm64/mm/init.c
index 5708adf0db52..f8af2c99667c 100644
--- a/arch/arm64/mm/init.c
+++ b/arch/arm64/mm/init.c
@@ -52,6 +52,8 @@  EXPORT_SYMBOL(memstart_addr);
 
 phys_addr_t arm64_dma_phys_limit __ro_after_init;
 
+extern u64 dma_direct_min_mask;
+
 #ifdef CONFIG_KEXEC_CORE
 /*
  * reserve_crashkernel() - reserves memory for crash kernel
@@ -198,8 +200,12 @@  static int __init early_init_dt_scan_dma_ranges(unsigned long node,
 	if (size > (1ULL << 32))
 		size = 1ULL << 32;
 
-	if (*dma_phys_limit > (phys_addr + size))
+	if (*dma_phys_limit > (phys_addr + size)) {
+		/* Set min DMA mask in case is was smaller than 32 */
+		dma_direct_min_mask = size - 1;
+
 		*dma_phys_limit = phys_addr + size;
+	}
 
 	return 0;
 }