linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	stable@vger.kernel.org, Sean Nyekjaer <sean@geanix.com>,
	Marc Kleine-Budde <mkl@pengutronix.de>,
	Sasha Levin <sashal@kernel.org>
Subject: [PATCH 4.4 06/40] can: mcp251x: add support for mcp25625
Date: Thu, 18 Jul 2019 12:02:02 +0900	[thread overview]
Message-ID: <20190718030040.776339312@linuxfoundation.org> (raw)
In-Reply-To: <20190718030039.676518610@linuxfoundation.org>

[ Upstream commit 35b7fa4d07c43ad79b88e6462119e7140eae955c ]

Fully compatible with mcp2515, the mcp25625 have integrated transceiver.

This patch adds support for the mcp25625 to the existing mcp251x driver.

Signed-off-by: Sean Nyekjaer <sean@geanix.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/can/spi/Kconfig   |  5 +++--
 drivers/net/can/spi/mcp251x.c | 25 ++++++++++++++++---------
 2 files changed, 19 insertions(+), 11 deletions(-)

diff --git a/drivers/net/can/spi/Kconfig b/drivers/net/can/spi/Kconfig
index 148cae5871a6..249d2db7d600 100644
--- a/drivers/net/can/spi/Kconfig
+++ b/drivers/net/can/spi/Kconfig
@@ -2,9 +2,10 @@ menu "CAN SPI interfaces"
 	depends on SPI
 
 config CAN_MCP251X
-	tristate "Microchip MCP251x SPI CAN controllers"
+	tristate "Microchip MCP251x and MCP25625 SPI CAN controllers"
 	depends on HAS_DMA
 	---help---
-	  Driver for the Microchip MCP251x SPI CAN controllers.
+	  Driver for the Microchip MCP251x and MCP25625 SPI CAN
+	  controllers.
 
 endmenu
diff --git a/drivers/net/can/spi/mcp251x.c b/drivers/net/can/spi/mcp251x.c
index 575790e8a75a..3bcbfcf0455a 100644
--- a/drivers/net/can/spi/mcp251x.c
+++ b/drivers/net/can/spi/mcp251x.c
@@ -1,5 +1,5 @@
 /*
- * CAN bus driver for Microchip 251x CAN Controller with SPI Interface
+ * CAN bus driver for Microchip 251x/25625 CAN Controller with SPI Interface
  *
  * MCP2510 support and bug fixes by Christian Pellegrin
  * <chripell@evolware.org>
@@ -41,7 +41,7 @@
  * static struct spi_board_info spi_board_info[] = {
  *         {
  *                 .modalias = "mcp2510",
- *			// or "mcp2515" depending on your controller
+ *			// "mcp2515" or "mcp25625" depending on your controller
  *                 .platform_data = &mcp251x_info,
  *                 .irq = IRQ_EINT13,
  *                 .max_speed_hz = 2*1000*1000,
@@ -238,6 +238,7 @@ static const struct can_bittiming_const mcp251x_bittiming_const = {
 enum mcp251x_model {
 	CAN_MCP251X_MCP2510	= 0x2510,
 	CAN_MCP251X_MCP2515	= 0x2515,
+	CAN_MCP251X_MCP25625	= 0x25625,
 };
 
 struct mcp251x_priv {
@@ -280,7 +281,6 @@ static inline int mcp251x_is_##_model(struct spi_device *spi) \
 }
 
 MCP251X_IS(2510);
-MCP251X_IS(2515);
 
 static void mcp251x_clean(struct net_device *net)
 {
@@ -640,7 +640,7 @@ static int mcp251x_hw_reset(struct spi_device *spi)
 
 	/* Wait for oscillator startup timer after reset */
 	mdelay(MCP251X_OST_DELAY_MS);
-	
+
 	reg = mcp251x_read_reg(spi, CANSTAT);
 	if ((reg & CANCTRL_REQOP_MASK) != CANCTRL_REQOP_CONF)
 		return -ENODEV;
@@ -821,9 +821,8 @@ static irqreturn_t mcp251x_can_ist(int irq, void *dev_id)
 		/* receive buffer 0 */
 		if (intf & CANINTF_RX0IF) {
 			mcp251x_hw_rx(spi, 0);
-			/*
-			 * Free one buffer ASAP
-			 * (The MCP2515 does this automatically.)
+			/* Free one buffer ASAP
+			 * (The MCP2515/25625 does this automatically.)
 			 */
 			if (mcp251x_is_2510(spi))
 				mcp251x_write_bits(spi, CANINTF, CANINTF_RX0IF, 0x00);
@@ -832,7 +831,7 @@ static irqreturn_t mcp251x_can_ist(int irq, void *dev_id)
 		/* receive buffer 1 */
 		if (intf & CANINTF_RX1IF) {
 			mcp251x_hw_rx(spi, 1);
-			/* the MCP2515 does this automatically */
+			/* The MCP2515/25625 does this automatically. */
 			if (mcp251x_is_2510(spi))
 				clear_intf |= CANINTF_RX1IF;
 		}
@@ -1006,6 +1005,10 @@ static const struct of_device_id mcp251x_of_match[] = {
 		.compatible	= "microchip,mcp2515",
 		.data		= (void *)CAN_MCP251X_MCP2515,
 	},
+	{
+		.compatible	= "microchip,mcp25625",
+		.data		= (void *)CAN_MCP251X_MCP25625,
+	},
 	{ }
 };
 MODULE_DEVICE_TABLE(of, mcp251x_of_match);
@@ -1019,6 +1022,10 @@ static const struct spi_device_id mcp251x_id_table[] = {
 		.name		= "mcp2515",
 		.driver_data	= (kernel_ulong_t)CAN_MCP251X_MCP2515,
 	},
+	{
+		.name		= "mcp25625",
+		.driver_data	= (kernel_ulong_t)CAN_MCP251X_MCP25625,
+	},
 	{ }
 };
 MODULE_DEVICE_TABLE(spi, mcp251x_id_table);
@@ -1254,5 +1261,5 @@ module_spi_driver(mcp251x_can_driver);
 
 MODULE_AUTHOR("Chris Elston <celston@katalix.com>, "
 	      "Christian Pellegrin <chripell@evolware.org>");
-MODULE_DESCRIPTION("Microchip 251x CAN driver");
+MODULE_DESCRIPTION("Microchip 251x/25625 CAN driver");
 MODULE_LICENSE("GPL v2");
-- 
2.20.1




  parent reply	other threads:[~2019-07-18  3:14 UTC|newest]

Thread overview: 47+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-07-18  3:01 [PATCH 4.4 00/40] 4.4.186-stable review Greg Kroah-Hartman
2019-07-18  3:01 ` [PATCH 4.4 01/40] Input: elantech - enable middle button support on 2 ThinkPads Greg Kroah-Hartman
2019-07-18  3:01 ` [PATCH 4.4 02/40] samples, bpf: fix to change the buffer size for read() Greg Kroah-Hartman
2019-07-18  3:01 ` [PATCH 4.4 03/40] mac80211: mesh: fix RCU warning Greg Kroah-Hartman
2019-07-18  3:02 ` [PATCH 4.4 04/40] mwifiex: Fix possible buffer overflows at parsing bss descriptor Greg Kroah-Hartman
2019-07-18  3:02 ` [PATCH 4.4 05/40] dt-bindings: can: mcp251x: add mcp25625 support Greg Kroah-Hartman
2019-07-18  3:02 ` Greg Kroah-Hartman [this message]
2019-07-18  3:02 ` [PATCH 4.4 07/40] Input: imx_keypad - make sure keyboard can always wake up system Greg Kroah-Hartman
2019-07-18  3:02 ` [PATCH 4.4 08/40] ARM: davinci: da850-evm: call regulator_has_full_constraints() Greg Kroah-Hartman
2019-07-18  3:02 ` [PATCH 4.4 09/40] ARM: davinci: da8xx: specify dma_coherent_mask for lcdc Greg Kroah-Hartman
2019-07-18  3:02 ` [PATCH 4.4 10/40] md: fix for divide error in status_resync Greg Kroah-Hartman
2019-07-18  3:02 ` [PATCH 4.4 11/40] bnx2x: Check if transceiver implements DDM before access Greg Kroah-Hartman
2019-07-18  3:02 ` [PATCH 4.4 12/40] udf: Fix incorrect final NOT_ALLOCATED (hole) extent length Greg Kroah-Hartman
2019-07-18  3:02 ` [PATCH 4.4 13/40] x86/ptrace: Fix possible spectre-v1 in ptrace_get_debugreg() Greg Kroah-Hartman
2019-07-18  3:02 ` [PATCH 4.4 14/40] x86/tls: Fix possible spectre-v1 in do_get_thread_area() Greg Kroah-Hartman
2019-07-18  3:02 ` [PATCH 4.4 15/40] mwifiex: Abort at too short BSS descriptor element Greg Kroah-Hartman
2019-07-18  3:02 ` [PATCH 4.4 16/40] mwifiex: Fix heap overflow in mwifiex_uap_parse_tail_ies() Greg Kroah-Hartman
2019-07-18  3:02 ` [PATCH 4.4 17/40] fscrypt: dont set policy for a dead directory Greg Kroah-Hartman
2019-07-18  3:02 ` [PATCH 4.4 18/40] mwifiex: Dont abort on small, spec-compliant vendor IEs Greg Kroah-Hartman
2019-07-18  3:02 ` [PATCH 4.4 19/40] USB: serial: ftdi_sio: add ID for isodebug v1 Greg Kroah-Hartman
2019-07-18  3:02 ` [PATCH 4.4 20/40] USB: serial: option: add support for GosunCn ME3630 RNDIS mode Greg Kroah-Hartman
2019-07-18  3:02 ` [PATCH 4.4 21/40] usb: gadget: ether: Fix race between gether_disconnect and rx_submit Greg Kroah-Hartman
2019-07-18  3:02 ` [PATCH 4.4 22/40] usb: renesas_usbhs: add a workaround for a race condition of workqueue Greg Kroah-Hartman
2019-07-18  3:02 ` [PATCH 4.4 23/40] staging: comedi: dt282x: fix a null pointer deref on interrupt Greg Kroah-Hartman
2019-07-18  3:02 ` [PATCH 4.4 24/40] staging: comedi: amplc_pci230: fix " Greg Kroah-Hartman
2019-07-18  3:02 ` [PATCH 4.4 25/40] carl9170: fix misuse of device driver API Greg Kroah-Hartman
2019-07-18  3:02 ` [PATCH 4.4 26/40] VMCI: Fix integer overflow in VMCI handle arrays Greg Kroah-Hartman
2019-07-18  3:02 ` [PATCH 4.4 27/40] MIPS: Remove superfluous check for __linux__ Greg Kroah-Hartman
2019-07-18  3:02 ` [PATCH 4.4 28/40] e1000e: start network tx queue only when link is up Greg Kroah-Hartman
2019-07-18  3:02 ` [PATCH 4.4 29/40] perf/core: Fix perf_sample_regs_user() mm check Greg Kroah-Hartman
2019-07-18  3:02 ` [PATCH 4.4 30/40] ARM: omap2: remove incorrect __init annotation Greg Kroah-Hartman
2019-07-18  3:02 ` [PATCH 4.4 31/40] be2net: fix link failure after ethtool offline test Greg Kroah-Hartman
2019-07-18  3:02 ` [PATCH 4.4 32/40] ppp: mppe: Add softdep to arc4 Greg Kroah-Hartman
2019-07-18  3:02 ` [PATCH 4.4 33/40] sis900: fix TX completion Greg Kroah-Hartman
2019-07-18  3:02 ` [PATCH 4.4 34/40] dm verity: use message limit for data block corruption message Greg Kroah-Hartman
2019-07-18  3:02 ` [PATCH 4.4 35/40] kvm: x86: avoid warning on repeated KVM_SET_TSS_ADDR Greg Kroah-Hartman
2019-07-18  3:02 ` [PATCH 4.4 36/40] ARC: hide unused function unw_hdr_alloc Greg Kroah-Hartman
2019-07-18  3:02 ` [PATCH 4.4 37/40] s390: fix stfle zero padding Greg Kroah-Hartman
2019-07-18  3:02 ` [PATCH 4.4 38/40] s390/qdio: (re-)initialize tiqdio list entries Greg Kroah-Hartman
2019-07-18  3:02 ` [PATCH 4.4 39/40] s390/qdio: dont touch the dsci in tiqdio_add_input_queues() Greg Kroah-Hartman
2019-07-18  3:02 ` [PATCH 4.4 40/40] KVM: x86: protect KVM_CREATE_PIT/KVM_CREATE_PIT2 with kvm->lock Greg Kroah-Hartman
2019-07-18  7:33 ` [PATCH 4.4 00/40] 4.4.186-stable review kernelci.org bot
2019-07-18  9:19 ` Jon Hunter
2019-07-18 15:26 ` Naresh Kamboju
2019-07-18 19:47 ` Guenter Roeck
2019-07-18 20:56 ` Kelsey Skunberg
2019-07-19  4:40 ` Bharath Vedartham

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190718030040.776339312@linuxfoundation.org \
    --to=gregkh@linuxfoundation.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mkl@pengutronix.de \
    --cc=sashal@kernel.org \
    --cc=sean@geanix.com \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).