linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	stable@vger.kernel.org,
	"Mauro S. M. Rodrigues" <maurosr@linux.vnet.ibm.com>,
	Sudarsana Reddy Kalluru <skalluru@marvell.com>,
	"David S. Miller" <davem@davemloft.net>,
	Sasha Levin <sashal@kernel.org>
Subject: [PATCH 4.4 11/40] bnx2x: Check if transceiver implements DDM before access
Date: Thu, 18 Jul 2019 12:02:07 +0900	[thread overview]
Message-ID: <20190718030042.555061177@linuxfoundation.org> (raw)
In-Reply-To: <20190718030039.676518610@linuxfoundation.org>

[ Upstream commit cf18cecca911c0db96b868072665347efe6df46f ]

Some transceivers may comply with SFF-8472 even though they do not
implement the Digital Diagnostic Monitoring (DDM) interface described in
the spec. The existence of such area is specified by the 6th bit of byte
92, set to 1 if implemented.

Currently, without checking this bit, bnx2x fails trying to read sfp
module's EEPROM with the follow message:

ethtool -m enP5p1s0f1
Cannot get Module EEPROM data: Input/output error

Because it fails to read the additional 256 bytes in which it is assumed
to exist the DDM data.

This issue was noticed using a Mellanox Passive DAC PN 01FT738. The EEPROM
data was confirmed by Mellanox as correct and similar to other Passive
DACs from other manufacturers.

Signed-off-by: Mauro S. M. Rodrigues <maurosr@linux.vnet.ibm.com>
Acked-by: Sudarsana Reddy Kalluru <skalluru@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c | 3 ++-
 drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.h    | 1 +
 2 files changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c
index c56b61dce2d1..f4e83c86d643 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c
@@ -1559,7 +1559,8 @@ static int bnx2x_get_module_info(struct net_device *dev,
 	}
 
 	if (!sff8472_comp ||
-	    (diag_type & SFP_EEPROM_DIAG_ADDR_CHANGE_REQ)) {
+	    (diag_type & SFP_EEPROM_DIAG_ADDR_CHANGE_REQ) ||
+	    !(diag_type & SFP_EEPROM_DDM_IMPLEMENTED)) {
 		modinfo->type = ETH_MODULE_SFF_8079;
 		modinfo->eeprom_len = ETH_MODULE_SFF_8079_LEN;
 	} else {
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.h
index b7d251108c19..7115f5025664 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.h
@@ -62,6 +62,7 @@
 #define SFP_EEPROM_DIAG_TYPE_ADDR		0x5c
 #define SFP_EEPROM_DIAG_TYPE_SIZE		1
 #define SFP_EEPROM_DIAG_ADDR_CHANGE_REQ		(1<<2)
+#define SFP_EEPROM_DDM_IMPLEMENTED		(1<<6)
 #define SFP_EEPROM_SFF_8472_COMP_ADDR		0x5e
 #define SFP_EEPROM_SFF_8472_COMP_SIZE		1
 
-- 
2.20.1




  parent reply	other threads:[~2019-07-18  3:17 UTC|newest]

Thread overview: 47+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-07-18  3:01 [PATCH 4.4 00/40] 4.4.186-stable review Greg Kroah-Hartman
2019-07-18  3:01 ` [PATCH 4.4 01/40] Input: elantech - enable middle button support on 2 ThinkPads Greg Kroah-Hartman
2019-07-18  3:01 ` [PATCH 4.4 02/40] samples, bpf: fix to change the buffer size for read() Greg Kroah-Hartman
2019-07-18  3:01 ` [PATCH 4.4 03/40] mac80211: mesh: fix RCU warning Greg Kroah-Hartman
2019-07-18  3:02 ` [PATCH 4.4 04/40] mwifiex: Fix possible buffer overflows at parsing bss descriptor Greg Kroah-Hartman
2019-07-18  3:02 ` [PATCH 4.4 05/40] dt-bindings: can: mcp251x: add mcp25625 support Greg Kroah-Hartman
2019-07-18  3:02 ` [PATCH 4.4 06/40] can: mcp251x: add support for mcp25625 Greg Kroah-Hartman
2019-07-18  3:02 ` [PATCH 4.4 07/40] Input: imx_keypad - make sure keyboard can always wake up system Greg Kroah-Hartman
2019-07-18  3:02 ` [PATCH 4.4 08/40] ARM: davinci: da850-evm: call regulator_has_full_constraints() Greg Kroah-Hartman
2019-07-18  3:02 ` [PATCH 4.4 09/40] ARM: davinci: da8xx: specify dma_coherent_mask for lcdc Greg Kroah-Hartman
2019-07-18  3:02 ` [PATCH 4.4 10/40] md: fix for divide error in status_resync Greg Kroah-Hartman
2019-07-18  3:02 ` Greg Kroah-Hartman [this message]
2019-07-18  3:02 ` [PATCH 4.4 12/40] udf: Fix incorrect final NOT_ALLOCATED (hole) extent length Greg Kroah-Hartman
2019-07-18  3:02 ` [PATCH 4.4 13/40] x86/ptrace: Fix possible spectre-v1 in ptrace_get_debugreg() Greg Kroah-Hartman
2019-07-18  3:02 ` [PATCH 4.4 14/40] x86/tls: Fix possible spectre-v1 in do_get_thread_area() Greg Kroah-Hartman
2019-07-18  3:02 ` [PATCH 4.4 15/40] mwifiex: Abort at too short BSS descriptor element Greg Kroah-Hartman
2019-07-18  3:02 ` [PATCH 4.4 16/40] mwifiex: Fix heap overflow in mwifiex_uap_parse_tail_ies() Greg Kroah-Hartman
2019-07-18  3:02 ` [PATCH 4.4 17/40] fscrypt: dont set policy for a dead directory Greg Kroah-Hartman
2019-07-18  3:02 ` [PATCH 4.4 18/40] mwifiex: Dont abort on small, spec-compliant vendor IEs Greg Kroah-Hartman
2019-07-18  3:02 ` [PATCH 4.4 19/40] USB: serial: ftdi_sio: add ID for isodebug v1 Greg Kroah-Hartman
2019-07-18  3:02 ` [PATCH 4.4 20/40] USB: serial: option: add support for GosunCn ME3630 RNDIS mode Greg Kroah-Hartman
2019-07-18  3:02 ` [PATCH 4.4 21/40] usb: gadget: ether: Fix race between gether_disconnect and rx_submit Greg Kroah-Hartman
2019-07-18  3:02 ` [PATCH 4.4 22/40] usb: renesas_usbhs: add a workaround for a race condition of workqueue Greg Kroah-Hartman
2019-07-18  3:02 ` [PATCH 4.4 23/40] staging: comedi: dt282x: fix a null pointer deref on interrupt Greg Kroah-Hartman
2019-07-18  3:02 ` [PATCH 4.4 24/40] staging: comedi: amplc_pci230: fix " Greg Kroah-Hartman
2019-07-18  3:02 ` [PATCH 4.4 25/40] carl9170: fix misuse of device driver API Greg Kroah-Hartman
2019-07-18  3:02 ` [PATCH 4.4 26/40] VMCI: Fix integer overflow in VMCI handle arrays Greg Kroah-Hartman
2019-07-18  3:02 ` [PATCH 4.4 27/40] MIPS: Remove superfluous check for __linux__ Greg Kroah-Hartman
2019-07-18  3:02 ` [PATCH 4.4 28/40] e1000e: start network tx queue only when link is up Greg Kroah-Hartman
2019-07-18  3:02 ` [PATCH 4.4 29/40] perf/core: Fix perf_sample_regs_user() mm check Greg Kroah-Hartman
2019-07-18  3:02 ` [PATCH 4.4 30/40] ARM: omap2: remove incorrect __init annotation Greg Kroah-Hartman
2019-07-18  3:02 ` [PATCH 4.4 31/40] be2net: fix link failure after ethtool offline test Greg Kroah-Hartman
2019-07-18  3:02 ` [PATCH 4.4 32/40] ppp: mppe: Add softdep to arc4 Greg Kroah-Hartman
2019-07-18  3:02 ` [PATCH 4.4 33/40] sis900: fix TX completion Greg Kroah-Hartman
2019-07-18  3:02 ` [PATCH 4.4 34/40] dm verity: use message limit for data block corruption message Greg Kroah-Hartman
2019-07-18  3:02 ` [PATCH 4.4 35/40] kvm: x86: avoid warning on repeated KVM_SET_TSS_ADDR Greg Kroah-Hartman
2019-07-18  3:02 ` [PATCH 4.4 36/40] ARC: hide unused function unw_hdr_alloc Greg Kroah-Hartman
2019-07-18  3:02 ` [PATCH 4.4 37/40] s390: fix stfle zero padding Greg Kroah-Hartman
2019-07-18  3:02 ` [PATCH 4.4 38/40] s390/qdio: (re-)initialize tiqdio list entries Greg Kroah-Hartman
2019-07-18  3:02 ` [PATCH 4.4 39/40] s390/qdio: dont touch the dsci in tiqdio_add_input_queues() Greg Kroah-Hartman
2019-07-18  3:02 ` [PATCH 4.4 40/40] KVM: x86: protect KVM_CREATE_PIT/KVM_CREATE_PIT2 with kvm->lock Greg Kroah-Hartman
2019-07-18  7:33 ` [PATCH 4.4 00/40] 4.4.186-stable review kernelci.org bot
2019-07-18  9:19 ` Jon Hunter
2019-07-18 15:26 ` Naresh Kamboju
2019-07-18 19:47 ` Guenter Roeck
2019-07-18 20:56 ` Kelsey Skunberg
2019-07-19  4:40 ` Bharath Vedartham

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190718030042.555061177@linuxfoundation.org \
    --to=gregkh@linuxfoundation.org \
    --cc=davem@davemloft.net \
    --cc=linux-kernel@vger.kernel.org \
    --cc=maurosr@linux.vnet.ibm.com \
    --cc=sashal@kernel.org \
    --cc=skalluru@marvell.com \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).