[v2] serial: 8250-mtk: modify mtk uart power and clock management
diff mbox series

Message ID 1563454716-8355-1-git-send-email-changqi.hu@mediatek.com
State Superseded
Headers show
Series
  • [v2] serial: 8250-mtk: modify mtk uart power and clock management
Related show

Commit Message

Changqi Hu July 18, 2019, 12:58 p.m. UTC
modify mtk uart runtime interface, enable uart clock before register.

Signed-off-by: Changqi Hu <changqi.hu@mediatek.com>
---
 drivers/tty/serial/8250/8250_mtk.c | 21 ++++++++-------------
 1 file changed, 8 insertions(+), 13 deletions(-)

Patch
diff mbox series

diff --git a/drivers/tty/serial/8250/8250_mtk.c b/drivers/tty/serial/8250/8250_mtk.c
index b0113d1..a07c8ae 100644
--- a/drivers/tty/serial/8250/8250_mtk.c
+++ b/drivers/tty/serial/8250/8250_mtk.c
@@ -389,7 +389,7 @@  static int __maybe_unused mtk8250_runtime_suspend(struct device *dev)
 	struct mtk8250_data *data = dev_get_drvdata(dev);
 	struct uart_8250_port *up = serial8250_get_port(data->line);
 
-	/*wait until UART in idle status*/
+	/* wait until UART in idle status */
 	while
 		(serial_in(up, MTK_UART_DEBUG0));
 
@@ -426,23 +426,15 @@  static int __maybe_unused mtk8250_runtime_resume(struct device *dev)
 static void
 mtk8250_do_pm(struct uart_port *port, unsigned int state, unsigned int old)
 {
-	struct uart_8250_port *up = up_to_u8250p(port);
-
-	if (!state) {
-		if (!(up->capabilities & UART_CAP_RPM))
-			mtk8250_runtime_resume(port->dev);
-		else
+	if (!state)
+		if (!mtk8250_runtime_resume(port->dev))
 			pm_runtime_get_sync(port->dev);
-	}
 
 	serial8250_do_pm(port, state, old);
 
-	if (state) {
-		if (!(up->capabilities & UART_CAP_RPM))
+	if (state)
+		if (!pm_runtime_put_sync_suspend(port->dev))
 			mtk8250_runtime_suspend(port->dev);
-		else
-			pm_runtime_put_sync_suspend(port->dev);
-	}
 }
 
 #ifdef CONFIG_SERIAL_8250_DMA
@@ -554,6 +546,9 @@  static int mtk8250_probe(struct platform_device *pdev)
 	platform_set_drvdata(pdev, data);
 
 	pm_runtime_enable(&pdev->dev);
+	err = mtk8250_runtime_resume(&pdev->dev);
+	if (err)
+		return err;
 
 	data->line = serial8250_register_8250_port(&uart);
 	if (data->line < 0)