From: tip-bot for Josh Poimboeuf <tipbot@zytor.com>
To: linux-tip-commits@vger.kernel.org
Cc: tglx@linutronix.de, linux-kernel@vger.kernel.org, hpa@zytor.com,
mingo@kernel.org, peterz@infradead.org, jpoimboe@redhat.com
Subject: [tip:core/urgent] x86/uaccess: Remove redundant CLACs in getuser/putuser error paths
Date: Thu, 18 Jul 2019 12:13:25 -0700 [thread overview]
Message-ID: <tip-82e844a6536d1a3c12a73e44712f4021d90a4b53@git.kernel.org> (raw)
In-Reply-To: <bc14ded2755ae75bd9010c446079e113dbddb74b.1563413318.git.jpoimboe@redhat.com>
Commit-ID: 82e844a6536d1a3c12a73e44712f4021d90a4b53
Gitweb: https://git.kernel.org/tip/82e844a6536d1a3c12a73e44712f4021d90a4b53
Author: Josh Poimboeuf <jpoimboe@redhat.com>
AuthorDate: Wed, 17 Jul 2019 20:36:44 -0500
Committer: Thomas Gleixner <tglx@linutronix.de>
CommitDate: Thu, 18 Jul 2019 21:01:06 +0200
x86/uaccess: Remove redundant CLACs in getuser/putuser error paths
The same getuser/putuser error paths are used regardless of whether AC
is set. In non-exception failure cases, this results in an unnecessary
CLAC.
Fixes the following warnings:
arch/x86/lib/getuser.o: warning: objtool: .altinstr_replacement+0x18: redundant UACCESS disable
arch/x86/lib/putuser.o: warning: objtool: .altinstr_replacement+0x18: redundant UACCESS disable
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/bc14ded2755ae75bd9010c446079e113dbddb74b.1563413318.git.jpoimboe@redhat.com
---
arch/x86/lib/getuser.S | 20 ++++++++++----------
arch/x86/lib/putuser.S | 29 ++++++++++++++++-------------
2 files changed, 26 insertions(+), 23 deletions(-)
diff --git a/arch/x86/lib/getuser.S b/arch/x86/lib/getuser.S
index 74fdff968ea3..304f958c27b2 100644
--- a/arch/x86/lib/getuser.S
+++ b/arch/x86/lib/getuser.S
@@ -115,29 +115,29 @@ ENDPROC(__get_user_8)
EXPORT_SYMBOL(__get_user_8)
+bad_get_user_clac:
+ ASM_CLAC
bad_get_user:
xor %edx,%edx
mov $(-EFAULT),%_ASM_AX
- ASM_CLAC
ret
-END(bad_get_user)
#ifdef CONFIG_X86_32
+bad_get_user_8_clac:
+ ASM_CLAC
bad_get_user_8:
xor %edx,%edx
xor %ecx,%ecx
mov $(-EFAULT),%_ASM_AX
- ASM_CLAC
ret
-END(bad_get_user_8)
#endif
- _ASM_EXTABLE_UA(1b, bad_get_user)
- _ASM_EXTABLE_UA(2b, bad_get_user)
- _ASM_EXTABLE_UA(3b, bad_get_user)
+ _ASM_EXTABLE_UA(1b, bad_get_user_clac)
+ _ASM_EXTABLE_UA(2b, bad_get_user_clac)
+ _ASM_EXTABLE_UA(3b, bad_get_user_clac)
#ifdef CONFIG_X86_64
- _ASM_EXTABLE_UA(4b, bad_get_user)
+ _ASM_EXTABLE_UA(4b, bad_get_user_clac)
#else
- _ASM_EXTABLE_UA(4b, bad_get_user_8)
- _ASM_EXTABLE_UA(5b, bad_get_user_8)
+ _ASM_EXTABLE_UA(4b, bad_get_user_8_clac)
+ _ASM_EXTABLE_UA(5b, bad_get_user_8_clac)
#endif
diff --git a/arch/x86/lib/putuser.S b/arch/x86/lib/putuser.S
index d2e5c9c39601..14bf78341d3c 100644
--- a/arch/x86/lib/putuser.S
+++ b/arch/x86/lib/putuser.S
@@ -32,8 +32,6 @@
*/
#define ENTER mov PER_CPU_VAR(current_task), %_ASM_BX
-#define EXIT ASM_CLAC ; \
- ret
.text
ENTRY(__put_user_1)
@@ -43,7 +41,8 @@ ENTRY(__put_user_1)
ASM_STAC
1: movb %al,(%_ASM_CX)
xor %eax,%eax
- EXIT
+ ASM_CLAC
+ ret
ENDPROC(__put_user_1)
EXPORT_SYMBOL(__put_user_1)
@@ -56,7 +55,8 @@ ENTRY(__put_user_2)
ASM_STAC
2: movw %ax,(%_ASM_CX)
xor %eax,%eax
- EXIT
+ ASM_CLAC
+ ret
ENDPROC(__put_user_2)
EXPORT_SYMBOL(__put_user_2)
@@ -69,7 +69,8 @@ ENTRY(__put_user_4)
ASM_STAC
3: movl %eax,(%_ASM_CX)
xor %eax,%eax
- EXIT
+ ASM_CLAC
+ ret
ENDPROC(__put_user_4)
EXPORT_SYMBOL(__put_user_4)
@@ -85,19 +86,21 @@ ENTRY(__put_user_8)
5: movl %edx,4(%_ASM_CX)
#endif
xor %eax,%eax
- EXIT
+ ASM_CLAC
+ RET
ENDPROC(__put_user_8)
EXPORT_SYMBOL(__put_user_8)
+bad_put_user_clac:
+ ASM_CLAC
bad_put_user:
movl $-EFAULT,%eax
- EXIT
-END(bad_put_user)
+ RET
- _ASM_EXTABLE_UA(1b, bad_put_user)
- _ASM_EXTABLE_UA(2b, bad_put_user)
- _ASM_EXTABLE_UA(3b, bad_put_user)
- _ASM_EXTABLE_UA(4b, bad_put_user)
+ _ASM_EXTABLE_UA(1b, bad_put_user_clac)
+ _ASM_EXTABLE_UA(2b, bad_put_user_clac)
+ _ASM_EXTABLE_UA(3b, bad_put_user_clac)
+ _ASM_EXTABLE_UA(4b, bad_put_user_clac)
#ifdef CONFIG_X86_32
- _ASM_EXTABLE_UA(5b, bad_put_user)
+ _ASM_EXTABLE_UA(5b, bad_put_user_clac)
#endif
next prev parent reply other threads:[~2019-07-18 19:13 UTC|newest]
Thread overview: 60+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-07-18 1:36 [PATCH v2 00/22] x86, objtool: several fixes/improvements Josh Poimboeuf
2019-07-18 1:36 ` [PATCH v2 01/22] x86/paravirt: Fix callee-saved function ELF sizes Josh Poimboeuf
2019-07-18 19:07 ` [tip:core/urgent] " tip-bot for Josh Poimboeuf
2019-07-18 1:36 ` [PATCH v2 02/22] x86/kvm: Fix fastop function ELF metadata Josh Poimboeuf
2019-07-18 19:08 ` [tip:core/urgent] " tip-bot for Josh Poimboeuf
2019-07-18 1:36 ` [PATCH v2 03/22] x86/kvm: Replace vmx_vmenter()'s call to kvm_spurious_fault() with UD2 Josh Poimboeuf
2019-07-18 8:17 ` Paolo Bonzini
2019-07-18 19:08 ` [tip:core/urgent] " tip-bot for Josh Poimboeuf
2019-07-18 1:36 ` [PATCH v2 04/22] x86/kvm: Don't call kvm_spurious_fault() from .fixup Josh Poimboeuf
2019-07-18 8:22 ` Paolo Bonzini
2019-07-18 13:16 ` Sean Christopherson
2019-07-18 13:18 ` Paolo Bonzini
2019-07-18 14:12 ` Josh Poimboeuf
2019-07-18 14:13 ` Paolo Bonzini
2019-07-18 14:03 ` Josh Poimboeuf
2019-07-18 19:09 ` [tip:core/urgent] " tip-bot for Josh Poimboeuf
2019-07-18 1:36 ` [PATCH v2 05/22] x86/entry: Fix thunk function ELF sizes Josh Poimboeuf
2019-07-18 19:10 ` [tip:core/urgent] " tip-bot for Josh Poimboeuf
2019-07-18 1:36 ` [PATCH v2 06/22] x86/head/64: Annotate start_cpu0() as non-callable Josh Poimboeuf
2019-07-18 19:11 ` [tip:core/urgent] " tip-bot for Josh Poimboeuf
2019-07-18 1:36 ` [PATCH v2 07/22] x86/uaccess: Remove ELF function annotation from copy_user_handle_tail() Josh Poimboeuf
2019-07-18 19:11 ` [tip:core/urgent] " tip-bot for Josh Poimboeuf
2019-07-18 1:36 ` [PATCH v2 08/22] x86/uaccess: Don't leak AC flag into fentry from mcsafe_handle_tail() Josh Poimboeuf
2019-07-18 19:12 ` [tip:core/urgent] " tip-bot for Josh Poimboeuf
2019-07-18 1:36 ` [PATCH v2 09/22] x86/uaccess: Remove redundant CLACs in getuser/putuser error paths Josh Poimboeuf
2019-07-18 19:13 ` tip-bot for Josh Poimboeuf [this message]
2019-07-18 1:36 ` [PATCH v2 10/22] bpf: Disable GCC -fgcse optimization for ___bpf_prog_run() Josh Poimboeuf
2019-07-18 19:14 ` [tip:core/urgent] " tip-bot for Josh Poimboeuf
2020-04-29 21:51 ` BPF vs objtool again Josh Poimboeuf
2020-04-29 22:01 ` Arvind Sankar
2020-04-29 23:41 ` Alexei Starovoitov
2020-04-30 0:13 ` Josh Poimboeuf
2020-04-30 2:10 ` Alexei Starovoitov
2020-04-30 3:53 ` Josh Poimboeuf
2020-04-30 4:24 ` Alexei Starovoitov
2020-04-30 4:43 ` Josh Poimboeuf
2019-07-18 1:36 ` [PATCH v2 11/22] objtool: Add mcsafe_handle_tail() to the uaccess safe list Josh Poimboeuf
2019-07-18 19:14 ` [tip:core/urgent] " tip-bot for Josh Poimboeuf
2019-07-18 1:36 ` [PATCH v2 12/22] objtool: Track original function across branches Josh Poimboeuf
2019-07-18 19:15 ` [tip:core/urgent] " tip-bot for Josh Poimboeuf
2019-07-18 1:36 ` [PATCH v2 13/22] objtool: Refactor function alias logic Josh Poimboeuf
2019-07-18 19:16 ` [tip:core/urgent] " tip-bot for Josh Poimboeuf
2019-07-18 1:36 ` [PATCH v2 14/22] objtool: Warn on zero-length functions Josh Poimboeuf
2019-07-18 19:17 ` [tip:core/urgent] " tip-bot for Josh Poimboeuf
2019-07-18 1:36 ` [PATCH v2 15/22] objtool: Change dead_end_function() to return boolean Josh Poimboeuf
2019-07-18 19:17 ` [tip:core/urgent] " tip-bot for Josh Poimboeuf
2019-07-18 1:36 ` [PATCH v2 16/22] objtool: Do frame pointer check before dead end check Josh Poimboeuf
2019-07-18 19:18 ` [tip:core/urgent] " tip-bot for Josh Poimboeuf
2019-07-18 1:36 ` [PATCH v2 17/22] objtool: Refactor sibling call detection logic Josh Poimboeuf
2019-07-18 19:19 ` [tip:core/urgent] " tip-bot for Josh Poimboeuf
2019-07-18 1:36 ` [PATCH v2 18/22] objtool: Refactor jump table code Josh Poimboeuf
2019-07-18 19:20 ` [tip:core/urgent] " tip-bot for Josh Poimboeuf
2019-07-18 1:36 ` [PATCH v2 19/22] objtool: Support repeated uses of the same C jump table Josh Poimboeuf
2019-07-18 19:20 ` [tip:core/urgent] " tip-bot for Jann Horn
2019-07-18 1:36 ` [PATCH v2 20/22] objtool: Fix seg fault on bad switch table entry Josh Poimboeuf
2019-07-18 19:21 ` [tip:core/urgent] " tip-bot for Josh Poimboeuf
2019-07-18 1:36 ` [PATCH v2 21/22] objtool: convert insn type to enum Josh Poimboeuf
2019-07-18 19:22 ` [tip:core/urgent] objtool: Convert " tip-bot for Josh Poimboeuf
2019-07-18 1:36 ` [PATCH v2 22/22] objtool: Support conditional retpolines Josh Poimboeuf
2019-07-18 19:23 ` [tip:core/urgent] " tip-bot for Josh Poimboeuf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=tip-82e844a6536d1a3c12a73e44712f4021d90a4b53@git.kernel.org \
--to=tipbot@zytor.com \
--cc=hpa@zytor.com \
--cc=jpoimboe@redhat.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-tip-commits@vger.kernel.org \
--cc=mingo@kernel.org \
--cc=peterz@infradead.org \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).