From: Gwendal Grignou <gwendal@chromium.org>
To: Jonathan Cameron <jic23@kernel.org>
Cc: Gwendal Grignou <gwendal@chromium.org>,
Enric Balletbo i Serra <enric.balletbo@collabora.com>,
linux-iio@vger.kernel.org, Hartmut Knaack <knaack.h@gmx.de>,
Guenter Roeck <groeck@chromium.org>,
Fabien Lahoudere <fabien.lahoudere@collabora.com>,
Benson Leung <bleung@chromium.org>,
Lars-Peter Clausen <lars@metafoo.de>,
Peter Meerwald-Stadler <pmeerw@pmeerw.net>,
linux-kernel@vger.kernel.org
Subject: [PATCH] iio: cros_ec: Remove replacing error code with -EIO
Date: Thu, 18 Jul 2019 15:22:37 -0700 [thread overview]
Message-ID: <20190718222238.60087-1-gwendal@chromium.org> (raw)
Due to an API misread, error code can be different for -EIO when reading
a sysfs entry. Return the error reported by the cros_ec stack.
Check the proper error message (protocol error, not supported) is
reported when there is an error returned by the EC stack.
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
---
.../cros_ec_sensors/cros_ec_sensors_core.c | 44 +++++++++++--------
drivers/iio/light/cros_ec_light_prox.c | 36 +++++++--------
drivers/iio/pressure/cros_ec_baro.c | 17 ++++---
3 files changed, 51 insertions(+), 46 deletions(-)
diff --git a/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c b/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c
index 130362ca421b..ed29ac22dff8 100644
--- a/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c
+++ b/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c
@@ -33,6 +33,7 @@ int cros_ec_sensors_core_init(struct platform_device *pdev,
struct cros_ec_sensors_core_state *state = iio_priv(indio_dev);
struct cros_ec_dev *ec = dev_get_drvdata(pdev->dev.parent);
struct cros_ec_sensor_platform *sensor_platform = dev_get_platdata(dev);
+ int ret;
platform_set_drvdata(pdev, indio_dev);
@@ -60,9 +61,10 @@ int cros_ec_sensors_core_init(struct platform_device *pdev,
state->param.cmd = MOTIONSENSE_CMD_INFO;
state->param.info.sensor_num = sensor_platform->sensor_num;
- if (cros_ec_motion_send_host_cmd(state, 0)) {
+ ret = cros_ec_motion_send_host_cmd(state, 0);
+ if (ret) {
dev_warn(dev, "Can not access sensor info\n");
- return -EIO;
+ return ret;
}
state->type = state->resp->info.type;
state->loc = state->resp->info.location;
@@ -86,7 +88,7 @@ int cros_ec_motion_send_host_cmd(struct cros_ec_sensors_core_state *state,
ret = cros_ec_cmd_xfer_status(state->ec, state->msg);
if (ret < 0)
- return -EIO;
+ return ret;
if (ret &&
state->resp != (struct ec_response_motion_sense *)state->msg->data)
@@ -396,7 +398,7 @@ int cros_ec_sensors_core_read(struct cros_ec_sensors_core_state *st,
struct iio_chan_spec const *chan,
int *val, int *val2, long mask)
{
- int ret = IIO_VAL_INT;
+ int ret;
switch (mask) {
case IIO_CHAN_INFO_SAMP_FREQ:
@@ -404,22 +406,27 @@ int cros_ec_sensors_core_read(struct cros_ec_sensors_core_state *st,
st->param.ec_rate.data =
EC_MOTION_SENSE_NO_VALUE;
- if (cros_ec_motion_send_host_cmd(st, 0))
- ret = -EIO;
- else
- *val = st->resp->ec_rate.ret;
+ ret = cros_ec_motion_send_host_cmd(st, 0);
+ if (ret)
+ break;
+
+ *val = st->resp->ec_rate.ret;
+ ret = IIO_VAL_INT;
break;
case IIO_CHAN_INFO_FREQUENCY:
st->param.cmd = MOTIONSENSE_CMD_SENSOR_ODR;
st->param.sensor_odr.data =
EC_MOTION_SENSE_NO_VALUE;
- if (cros_ec_motion_send_host_cmd(st, 0))
- ret = -EIO;
- else
- *val = st->resp->sensor_odr.ret;
+ ret = cros_ec_motion_send_host_cmd(st, 0);
+ if (ret)
+ break;
+
+ *val = st->resp->sensor_odr.ret;
+ ret = IIO_VAL_INT;
break;
default:
+ ret = -EINVAL;
break;
}
@@ -431,7 +438,7 @@ int cros_ec_sensors_core_write(struct cros_ec_sensors_core_state *st,
struct iio_chan_spec const *chan,
int val, int val2, long mask)
{
- int ret = 0;
+ int ret;
switch (mask) {
case IIO_CHAN_INFO_FREQUENCY:
@@ -441,17 +448,16 @@ int cros_ec_sensors_core_write(struct cros_ec_sensors_core_state *st,
/* Always roundup, so caller gets at least what it asks for. */
st->param.sensor_odr.roundup = 1;
- if (cros_ec_motion_send_host_cmd(st, 0))
- ret = -EIO;
+ ret = cros_ec_motion_send_host_cmd(st, 0);
break;
case IIO_CHAN_INFO_SAMP_FREQ:
st->param.cmd = MOTIONSENSE_CMD_EC_RATE;
st->param.ec_rate.data = val;
- if (cros_ec_motion_send_host_cmd(st, 0))
- ret = -EIO;
- else
- st->curr_sampl_freq = val;
+ ret = cros_ec_motion_send_host_cmd(st, 0);
+ if (ret)
+ break;
+ st->curr_sampl_freq = val;
break;
default:
ret = -EINVAL;
diff --git a/drivers/iio/light/cros_ec_light_prox.c b/drivers/iio/light/cros_ec_light_prox.c
index 308ee6ff2e22..943fa305af91 100644
--- a/drivers/iio/light/cros_ec_light_prox.c
+++ b/drivers/iio/light/cros_ec_light_prox.c
@@ -42,7 +42,7 @@ static int cros_ec_light_prox_read(struct iio_dev *indio_dev,
struct cros_ec_light_prox_state *st = iio_priv(indio_dev);
u16 data = 0;
s64 val64;
- int ret = IIO_VAL_INT;
+ int ret;
int idx = chan->scan_index;
mutex_lock(&st->core.cmd_lock);
@@ -50,23 +50,22 @@ static int cros_ec_light_prox_read(struct iio_dev *indio_dev,
switch (mask) {
case IIO_CHAN_INFO_RAW:
if (chan->type == IIO_PROXIMITY) {
- if (cros_ec_sensors_read_cmd(indio_dev, 1 << idx,
- (s16 *)&data) < 0) {
- ret = -EIO;
+ ret = cros_ec_sensors_read_cmd(indio_dev, 1 << idx,
+ (s16 *)&data);
+ if (ret)
break;
- }
*val = data;
+ ret = IIO_VAL_INT;
} else {
ret = -EINVAL;
}
break;
case IIO_CHAN_INFO_PROCESSED:
if (chan->type == IIO_LIGHT) {
- if (cros_ec_sensors_read_cmd(indio_dev, 1 << idx,
- (s16 *)&data) < 0) {
- ret = -EIO;
+ ret = cros_ec_sensors_read_cmd(indio_dev, 1 << idx,
+ (s16 *)&data);
+ if (ret)
break;
- }
/*
* The data coming from the light sensor is
* pre-processed and represents the ambient light
@@ -82,15 +81,15 @@ static int cros_ec_light_prox_read(struct iio_dev *indio_dev,
st->core.param.cmd = MOTIONSENSE_CMD_SENSOR_OFFSET;
st->core.param.sensor_offset.flags = 0;
- if (cros_ec_motion_send_host_cmd(&st->core, 0)) {
- ret = -EIO;
+ ret = cros_ec_motion_send_host_cmd(&st->core, 0);
+ if (ret)
break;
- }
/* Save values */
st->core.calib[0] = st->core.resp->sensor_offset.offset[0];
*val = st->core.calib[idx];
+ ret = IIO_VAL_INT;
break;
case IIO_CHAN_INFO_CALIBSCALE:
/*
@@ -101,10 +100,9 @@ static int cros_ec_light_prox_read(struct iio_dev *indio_dev,
st->core.param.cmd = MOTIONSENSE_CMD_SENSOR_RANGE;
st->core.param.sensor_range.data = EC_MOTION_SENSE_NO_VALUE;
- if (cros_ec_motion_send_host_cmd(&st->core, 0)) {
- ret = -EIO;
+ ret = cros_ec_motion_send_host_cmd(&st->core, 0);
+ if (ret)
break;
- }
val64 = st->core.resp->sensor_range.ret;
*val = val64 >> 16;
@@ -127,7 +125,7 @@ static int cros_ec_light_prox_write(struct iio_dev *indio_dev,
int val, int val2, long mask)
{
struct cros_ec_light_prox_state *st = iio_priv(indio_dev);
- int ret = 0;
+ int ret;
int idx = chan->scan_index;
mutex_lock(&st->core.cmd_lock);
@@ -141,14 +139,12 @@ static int cros_ec_light_prox_write(struct iio_dev *indio_dev,
st->core.param.sensor_offset.offset[0] = st->core.calib[0];
st->core.param.sensor_offset.temp =
EC_MOTION_SENSE_INVALID_CALIB_TEMP;
- if (cros_ec_motion_send_host_cmd(&st->core, 0))
- ret = -EIO;
+ ret = cros_ec_motion_send_host_cmd(&st->core, 0);
break;
case IIO_CHAN_INFO_CALIBSCALE:
st->core.param.cmd = MOTIONSENSE_CMD_SENSOR_RANGE;
st->core.param.sensor_range.data = (val << 16) | (val2 / 100);
- if (cros_ec_motion_send_host_cmd(&st->core, 0))
- ret = -EIO;
+ ret = cros_ec_motion_send_host_cmd(&st->core, 0);
break;
default:
ret = cros_ec_sensors_core_write(&st->core, chan, val, val2,
diff --git a/drivers/iio/pressure/cros_ec_baro.c b/drivers/iio/pressure/cros_ec_baro.c
index 034ce98d6e97..a648582b14a7 100644
--- a/drivers/iio/pressure/cros_ec_baro.c
+++ b/drivers/iio/pressure/cros_ec_baro.c
@@ -39,26 +39,29 @@ static int cros_ec_baro_read(struct iio_dev *indio_dev,
{
struct cros_ec_baro_state *st = iio_priv(indio_dev);
u16 data = 0;
- int ret = IIO_VAL_INT;
+ int ret;
int idx = chan->scan_index;
mutex_lock(&st->core.cmd_lock);
switch (mask) {
case IIO_CHAN_INFO_RAW:
- if (cros_ec_sensors_read_cmd(indio_dev, 1 << idx,
- (s16 *)&data) < 0)
- ret = -EIO;
+ ret = cros_ec_sensors_read_cmd(indio_dev, 1 << idx,
+ (s16 *)&data);
+ if (ret)
+ break;
+
*val = data;
+ ret = IIO_VAL_INT;
break;
case IIO_CHAN_INFO_SCALE:
st->core.param.cmd = MOTIONSENSE_CMD_SENSOR_RANGE;
st->core.param.sensor_range.data = EC_MOTION_SENSE_NO_VALUE;
- if (cros_ec_motion_send_host_cmd(&st->core, 0)) {
- ret = -EIO;
+ ret = cros_ec_motion_send_host_cmd(&st->core, 0);
+ if (ret)
break;
- }
+
*val = st->core.resp->sensor_range.ret;
/* scale * in_pressure_raw --> kPa */
--
2.22.0.657.g960e92d24f-goog
next reply other threads:[~2019-07-18 22:22 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-07-18 22:22 Gwendal Grignou [this message]
2019-07-21 17:40 ` [PATCH] iio: cros_ec: Remove replacing error code with -EIO Jonathan Cameron
2019-07-27 21:52 ` Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190718222238.60087-1-gwendal@chromium.org \
--to=gwendal@chromium.org \
--cc=bleung@chromium.org \
--cc=enric.balletbo@collabora.com \
--cc=fabien.lahoudere@collabora.com \
--cc=groeck@chromium.org \
--cc=jic23@kernel.org \
--cc=knaack.h@gmx.de \
--cc=lars@metafoo.de \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=pmeerw@pmeerw.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).