From: Hennie Muller <hm@bitlabs.co.za>
To: Linus Walleij <linus.walleij@linaro.org>,
Bartosz Golaszewski <bgolaszewski@baylibre.com>,
linux-gpio@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: Hennie Muller <hm@bitlabs.co.za>
Subject: [PATCH 1/2] [PATCH] gpio: Replace usage of bare 'unsigned' with 'unsigned int'
Date: Sun, 21 Jul 2019 14:52:58 +0200 [thread overview]
Message-ID: <20190721125259.13990-1-hm@bitlabs.co.za> (raw)
Fixes a couple of warnings by checkpatch and sparse.
Signed-off-by: Hennie Muller <hm@bitlabs.co.za>
---
drivers/gpio/gpio-viperboard.c | 20 ++++++++++----------
1 file changed, 10 insertions(+), 10 deletions(-)
diff --git a/drivers/gpio/gpio-viperboard.c b/drivers/gpio/gpio-viperboard.c
index 9b604f13e302..c301c1d56dd2 100644
--- a/drivers/gpio/gpio-viperboard.c
+++ b/drivers/gpio/gpio-viperboard.c
@@ -79,7 +79,7 @@ MODULE_PARM_DESC(gpioa_freq,
/* ----- begin of gipo a chip -------------------------------------------- */
static int vprbrd_gpioa_get(struct gpio_chip *chip,
- unsigned offset)
+ unsigned int offset)
{
int ret, answer, error = 0;
struct vprbrd_gpio *gpio = gpiochip_get_data(chip);
@@ -129,7 +129,7 @@ static int vprbrd_gpioa_get(struct gpio_chip *chip,
}
static void vprbrd_gpioa_set(struct gpio_chip *chip,
- unsigned offset, int value)
+ unsigned int offset, int value)
{
int ret;
struct vprbrd_gpio *gpio = gpiochip_get_data(chip);
@@ -170,7 +170,7 @@ static void vprbrd_gpioa_set(struct gpio_chip *chip,
}
static int vprbrd_gpioa_direction_input(struct gpio_chip *chip,
- unsigned offset)
+ unsigned int offset)
{
int ret;
struct vprbrd_gpio *gpio = gpiochip_get_data(chip);
@@ -207,7 +207,7 @@ static int vprbrd_gpioa_direction_input(struct gpio_chip *chip,
}
static int vprbrd_gpioa_direction_output(struct gpio_chip *chip,
- unsigned offset, int value)
+ unsigned int offset, int value)
{
int ret;
struct vprbrd_gpio *gpio = gpiochip_get_data(chip);
@@ -251,8 +251,8 @@ static int vprbrd_gpioa_direction_output(struct gpio_chip *chip,
/* ----- begin of gipo b chip -------------------------------------------- */
-static int vprbrd_gpiob_setdir(struct vprbrd *vb, unsigned offset,
- unsigned dir)
+static int vprbrd_gpiob_setdir(struct vprbrd *vb, unsigned int offset,
+ unsigned int dir)
{
struct vprbrd_gpiob_msg *gbmsg = (struct vprbrd_gpiob_msg *)vb->buf;
int ret;
@@ -273,7 +273,7 @@ static int vprbrd_gpiob_setdir(struct vprbrd *vb, unsigned offset,
}
static int vprbrd_gpiob_get(struct gpio_chip *chip,
- unsigned offset)
+ unsigned int offset)
{
int ret;
u16 val;
@@ -305,7 +305,7 @@ static int vprbrd_gpiob_get(struct gpio_chip *chip,
}
static void vprbrd_gpiob_set(struct gpio_chip *chip,
- unsigned offset, int value)
+ unsigned int offset, int value)
{
int ret;
struct vprbrd_gpio *gpio = gpiochip_get_data(chip);
@@ -338,7 +338,7 @@ static void vprbrd_gpiob_set(struct gpio_chip *chip,
}
static int vprbrd_gpiob_direction_input(struct gpio_chip *chip,
- unsigned offset)
+ unsigned int offset)
{
int ret;
struct vprbrd_gpio *gpio = gpiochip_get_data(chip);
@@ -359,7 +359,7 @@ static int vprbrd_gpiob_direction_input(struct gpio_chip *chip,
}
static int vprbrd_gpiob_direction_output(struct gpio_chip *chip,
- unsigned offset, int value)
+ unsigned int offset, int value)
{
int ret;
struct vprbrd_gpio *gpio = gpiochip_get_data(chip);
--
2.22.0
next reply other threads:[~2019-07-21 13:14 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-07-21 12:52 Hennie Muller [this message]
2019-07-21 12:52 ` [PATCH 2/2] [PATCH] gpio: Explicitly cast from __be16 to unsigned short Hennie Muller
2019-08-05 9:10 ` Linus Walleij
2019-08-05 11:52 ` Arnd Bergmann
2019-07-22 2:05 ` [PATCH 1/2] [PATCH] gpio: Replace usage of bare 'unsigned' with 'unsigned int' Phil Reid
2019-07-22 4:51 ` Hennie Muller
2019-08-05 9:26 ` Linus Walleij
2019-08-05 9:27 ` Linus Walleij
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190721125259.13990-1-hm@bitlabs.co.za \
--to=hm@bitlabs.co.za \
--cc=bgolaszewski@baylibre.com \
--cc=linus.walleij@linaro.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).