linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Sowjanya Komatineni <skomatineni@nvidia.com>
To: <thierry.reding@gmail.com>, <jonathanh@nvidia.com>,
	<tglx@linutronix.de>, <jason@lakedaemon.net>,
	<marc.zyngier@arm.com>, <linus.walleij@linaro.org>,
	<stefan@agner.ch>, <mark.rutland@arm.com>
Cc: <pdeschrijver@nvidia.com>, <pgaikwad@nvidia.com>,
	<sboyd@kernel.org>, <linux-clk@vger.kernel.org>,
	<linux-gpio@vger.kernel.org>, <jckuo@nvidia.com>,
	<josephl@nvidia.com>, <talho@nvidia.com>,
	<skomatineni@nvidia.com>, <linux-tegra@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>, <mperttunen@nvidia.com>,
	<spatra@nvidia.com>, <robh+dt@kernel.org>, <digetx@gmail.com>,
	<devicetree@vger.kernel.org>
Subject: [PATCH V6 14/21] clk: tegra210: Add suspend and resume support
Date: Sun, 21 Jul 2019 12:40:53 -0700	[thread overview]
Message-ID: <1563738060-30213-15-git-send-email-skomatineni@nvidia.com> (raw)
In-Reply-To: <1563738060-30213-1-git-send-email-skomatineni@nvidia.com>

This patch adds support for clk: tegra210: suspend-resume.

All the CAR controller settings are lost on suspend when core
power goes off.

This patch has implementation for saving and restoring all PLLs
and clocks context during system suspend and resume to have the
clocks back to same state for normal operation.

Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
---
 drivers/clk/tegra/clk-tegra210.c | 68 ++++++++++++++++++++++++++++++++++++++--
 drivers/clk/tegra/clk.c          | 14 +++++++++
 drivers/clk/tegra/clk.h          |  1 +
 3 files changed, 80 insertions(+), 3 deletions(-)

diff --git a/drivers/clk/tegra/clk-tegra210.c b/drivers/clk/tegra/clk-tegra210.c
index 55a88c0824a5..68271873acc1 100644
--- a/drivers/clk/tegra/clk-tegra210.c
+++ b/drivers/clk/tegra/clk-tegra210.c
@@ -9,6 +9,7 @@
 #include <linux/clkdev.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
+#include <linux/syscore_ops.h>
 #include <linux/delay.h>
 #include <linux/export.h>
 #include <linux/mutex.h>
@@ -220,11 +221,15 @@
 #define CLK_M_DIVISOR_SHIFT 2
 #define CLK_M_DIVISOR_MASK 0x3
 
+#define CLK_MASK_ARM	0x44
+#define MISC_CLK_ENB	0x48
+
 #define RST_DFLL_DVCO 0x2f4
 #define DVFS_DFLL_RESET_SHIFT 0
 
 #define CLK_RST_CONTROLLER_RST_DEV_Y_SET 0x2a8
 #define CLK_RST_CONTROLLER_RST_DEV_Y_CLR 0x2ac
+#define CPU_SOFTRST_CTRL 0x380
 
 #define LVL2_CLK_GATE_OVRA 0xf8
 #define LVL2_CLK_GATE_OVRC 0x3a0
@@ -2825,6 +2830,7 @@ static int tegra210_enable_pllu(void)
 	struct tegra_clk_pll_freq_table *fentry;
 	struct tegra_clk_pll pllu;
 	u32 reg;
+	int ret;
 
 	for (fentry = pll_u_freq_table; fentry->input_rate; fentry++) {
 		if (fentry->input_rate == pll_ref_freq)
@@ -2853,9 +2859,8 @@ static int tegra210_enable_pllu(void)
 	reg |= PLL_ENABLE;
 	writel(reg, clk_base + PLLU_BASE);
 
-	readl_relaxed_poll_timeout_atomic(clk_base + PLLU_BASE, reg,
-					  reg & PLL_BASE_LOCK, 2, 1000);
-	if (!(reg & PLL_BASE_LOCK)) {
+	ret = tegra210_wait_for_mask(&pllu, PLLU_BASE, PLL_BASE_LOCK);
+	if (ret) {
 		pr_err("Timed out waiting for PLL_U to lock\n");
 		return -ETIMEDOUT;
 	}
@@ -3288,6 +3293,56 @@ static void tegra210_disable_cpu_clock(u32 cpu)
 }
 
 #ifdef CONFIG_PM_SLEEP
+#define car_readl(_base, _off) readl_relaxed(clk_base + (_base) + ((_off) * 4))
+#define car_writel(_val, _base, _off) \
+		writel_relaxed(_val, clk_base + (_base) + ((_off) * 4))
+
+static u32 spare_reg_ctx, misc_clk_enb_ctx, clk_msk_arm_ctx;
+static u32 cpu_softrst_ctx[3];
+
+static int tegra210_clk_suspend(void)
+{
+	unsigned int i;
+
+	clk_save_context();
+
+	/*
+	 * save the bootloader configured clock registers SPARE_REG0,
+	 * MISC_CLK_ENB, CLK_MASK_ARM, CPU_SOFTRST_CTRL
+	 */
+	spare_reg_ctx = readl_relaxed(clk_base + SPARE_REG0);
+	misc_clk_enb_ctx = readl_relaxed(clk_base + MISC_CLK_ENB);
+	clk_msk_arm_ctx = readl_relaxed(clk_base + CLK_MASK_ARM);
+
+	for (i = 0; i < ARRAY_SIZE(cpu_softrst_ctx); i++)
+		cpu_softrst_ctx[i] = car_readl(CPU_SOFTRST_CTRL, i);
+
+	return 0;
+}
+
+static void tegra210_clk_resume(void)
+{
+	unsigned int i;
+
+	tegra_clk_osc_resume(clk_base);
+
+	/*
+	 * restore the bootloader configured clock registers SPARE_REG0,
+	 * MISC_CLK_ENB, CLK_MASK_ARM, CPU_SOFTRST_CTRL from saved context.
+	 */
+	writel_relaxed(spare_reg_ctx, clk_base + SPARE_REG0);
+	writel_relaxed(misc_clk_enb_ctx, clk_base + MISC_CLK_ENB);
+	writel_relaxed(clk_msk_arm_ctx, clk_base + CLK_MASK_ARM);
+
+	for (i = 0; i < ARRAY_SIZE(cpu_softrst_ctx); i++)
+		car_writel(cpu_softrst_ctx[i], CPU_SOFTRST_CTRL, i);
+
+	fence_udelay(5, clk_base);
+
+	tegra210_init_pllu();
+	clk_restore_context();
+}
+
 static void tegra210_cpu_clock_suspend(void)
 {
 	/* switch coresite to clk_m, save off original source */
@@ -3303,6 +3358,11 @@ static void tegra210_cpu_clock_resume(void)
 }
 #endif
 
+static struct syscore_ops tegra_clk_syscore_ops = {
+	.suspend = tegra210_clk_suspend,
+	.resume = tegra210_clk_resume,
+};
+
 static struct tegra_cpu_car_ops tegra210_cpu_car_ops = {
 	.wait_for_reset	= tegra210_wait_cpu_in_reset,
 	.disable_clock	= tegra210_disable_cpu_clock,
@@ -3587,5 +3647,7 @@ static void __init tegra210_clock_init(struct device_node *np)
 	tegra210_mbist_clk_init();
 
 	tegra_cpu_car_ops = &tegra210_cpu_car_ops;
+
+	register_syscore_ops(&tegra_clk_syscore_ops);
 }
 CLK_OF_DECLARE(tegra210, "nvidia,tegra210-car", tegra210_clock_init);
diff --git a/drivers/clk/tegra/clk.c b/drivers/clk/tegra/clk.c
index 573e3c967ae1..eb08047fd02f 100644
--- a/drivers/clk/tegra/clk.c
+++ b/drivers/clk/tegra/clk.c
@@ -23,6 +23,7 @@
 #define CLK_OUT_ENB_W			0x364
 #define CLK_OUT_ENB_X			0x280
 #define CLK_OUT_ENB_Y			0x298
+#define CLK_ENB_PLLP_OUT_CPU		BIT(31)
 #define CLK_OUT_ENB_SET_L		0x320
 #define CLK_OUT_ENB_CLR_L		0x324
 #define CLK_OUT_ENB_SET_H		0x328
@@ -199,6 +200,19 @@ const struct tegra_clk_periph_regs *get_reg_bank(int clkid)
 	}
 }
 
+void tegra_clk_set_pllp_out_cpu(bool enable)
+{
+	u32 val;
+
+	val = readl_relaxed(clk_base + CLK_OUT_ENB_Y);
+	if (enable)
+		val |= CLK_ENB_PLLP_OUT_CPU;
+	else
+		val &= ~CLK_ENB_PLLP_OUT_CPU;
+
+	writel_relaxed(val, clk_base + CLK_OUT_ENB_Y);
+}
+
 struct clk ** __init tegra_clk_init(void __iomem *regs, int num, int banks)
 {
 	clk_base = regs;
diff --git a/drivers/clk/tegra/clk.h b/drivers/clk/tegra/clk.h
index 562a3ee2d537..0ffa763c755b 100644
--- a/drivers/clk/tegra/clk.h
+++ b/drivers/clk/tegra/clk.h
@@ -863,6 +863,7 @@ int div_frac_get(unsigned long rate, unsigned parent_rate, u8 width,
 		 u8 frac_width, u8 flags);
 void tegra_clk_sync_state_pll(struct clk_hw *hw);
 void tegra_clk_osc_resume(void __iomem *clk_base);
+void tegra_clk_set_pllp_out_cpu(bool enable);
 
 /* Combined read fence with delay */
 #define fence_udelay(delay, reg)	\
-- 
2.7.4


  parent reply	other threads:[~2019-07-21 19:41 UTC|newest]

Thread overview: 84+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-07-21 19:40 [PATCH V6 00/21] SC7 entry and exit support for Tegra210 Sowjanya Komatineni
2019-07-21 19:40 ` [PATCH V6 01/21] irqchip: tegra: Do not disable COP IRQ during suspend Sowjanya Komatineni
2019-07-21 20:24   ` Marc Zyngier
2019-07-22  9:54   ` Dmitry Osipenko
2019-07-22 10:13     ` Marc Zyngier
2019-07-22 10:57       ` Dmitry Osipenko
2019-07-22 16:21         ` Sowjanya Komatineni
2019-07-22 18:38           ` Marc Zyngier
2019-07-22 23:35             ` Dmitry Osipenko
2019-07-24 23:09               ` Sowjanya Komatineni
2019-07-26  4:48                 ` Dmitry Osipenko
2019-07-25  9:55     ` Peter De Schrijver
2019-07-25 10:05       ` Dmitry Osipenko
2019-07-25 10:33         ` Peter De Schrijver
2019-07-25 10:38           ` Peter De Schrijver
2019-07-25 10:59             ` Dmitry Osipenko
2019-08-02 13:05               ` Peter De Schrijver
2019-08-02 17:35                 ` Dmitry Osipenko
2019-07-21 19:40 ` [PATCH V6 02/21] pinctrl: tegra: Add suspend and resume support Sowjanya Komatineni
2019-07-21 22:03   ` Dmitry Osipenko
2019-07-21 22:09     ` Dmitry Osipenko
2019-07-21 22:48       ` Sowjanya Komatineni
2019-07-21 19:40 ` [PATCH V6 03/21] pinctrl: tegra210: Add Tegra210 pinctrl pm ops Sowjanya Komatineni
2019-07-21 19:40 ` [PATCH V6 04/21] clk: tegra: Save and restore divider rate Sowjanya Komatineni
2019-07-21 22:14   ` Dmitry Osipenko
2019-07-21 19:40 ` [PATCH V6 05/21] clk: tegra: pllout: Save and restore pllout context Sowjanya Komatineni
2019-07-21 22:18   ` Dmitry Osipenko
2019-07-21 19:40 ` [PATCH V6 06/21] clk: tegra: pll: Save and restore pll context Sowjanya Komatineni
2019-07-21 21:44   ` Dmitry Osipenko
2019-07-21 22:47     ` Sowjanya Komatineni
2019-07-21 22:21   ` Dmitry Osipenko
2019-07-22  3:22     ` Sowjanya Komatineni
2019-07-21 19:40 ` [PATCH V6 07/21] clk: tegra: Support for OSC context save and restore Sowjanya Komatineni
2019-07-22 10:12   ` Dmitry Osipenko
2019-07-21 19:40 ` [PATCH V6 08/21] clk: tegra: clk-periph: Add save and restore support Sowjanya Komatineni
2019-07-21 19:40 ` [PATCH V6 09/21] clk: tegra: clk-super: Fix to enable PLLP branches to CPU Sowjanya Komatineni
2019-07-21 21:16   ` Dmitry Osipenko
2019-07-21 22:39     ` Sowjanya Komatineni
2019-07-22  3:17       ` Sowjanya Komatineni
2019-07-22  6:32         ` Dmitry Osipenko
2019-07-22  7:12           ` Sowjanya Komatineni
2019-07-22  7:17             ` Dmitry Osipenko
2019-07-22  7:24               ` Sowjanya Komatineni
2019-07-22  7:30                 ` Dmitry Osipenko
2019-07-22  7:36                   ` Sowjanya Komatineni
2019-07-21 19:40 ` [PATCH V6 10/21] clk: tegra: clk-super: Add save and restore support Sowjanya Komatineni
2019-07-21 19:40 ` [PATCH V6 11/21] clk: tegra: clk-dfll: Add suspend and resume support Sowjanya Komatineni
2019-07-21 21:32   ` Dmitry Osipenko
2019-07-21 22:42     ` Sowjanya Komatineni
2019-07-21 19:40 ` [PATCH V6 12/21] cpufreq: tegra124: " Sowjanya Komatineni
2019-07-21 21:04   ` Dmitry Osipenko
2019-07-21 19:40 ` [PATCH V6 13/21] clk: tegra210: Use fence_udelay during PLLU init Sowjanya Komatineni
2019-07-21 19:40 ` Sowjanya Komatineni [this message]
2019-07-21 21:38   ` [PATCH V6 14/21] clk: tegra210: Add suspend and resume support Dmitry Osipenko
2019-07-21 22:45     ` Sowjanya Komatineni
2019-07-22  6:10       ` Dmitry Osipenko
2019-07-22  6:52         ` Sowjanya Komatineni
2019-07-22  7:09           ` Dmitry Osipenko
2019-07-22  7:12             ` Dmitry Osipenko
2019-08-02 17:51               ` Stephen Boyd
2019-08-02 20:39                 ` Sowjanya Komatineni
2019-08-07 21:22                   ` Stephen Boyd
2019-07-21 19:40 ` [PATCH V6 15/21] soc/tegra: pmc: Allow to support more tegras wake Sowjanya Komatineni
2019-07-21 19:40 ` [PATCH V6 16/21] soc/tegra: pmc: Add pmc wake support for tegra210 Sowjanya Komatineni
2019-07-23  0:58   ` Dmitry Osipenko
2019-07-23  1:08     ` Dmitry Osipenko
2019-07-23  1:41       ` Dmitry Osipenko
2019-07-23  1:52         ` Dmitry Osipenko
2019-07-23  2:10           ` Dmitry Osipenko
     [not found]         ` <71a88a9c-a542-557a-0eaa-3c90112dee0e@nvidia.com>
2019-07-23  3:03           ` Dmitry Osipenko
2019-07-23  3:09             ` Sowjanya Komatineni
2019-07-23  3:25               ` Dmitry Osipenko
2019-07-23  3:31                 ` Sowjanya Komatineni
2019-07-23  3:43                   ` Dmitry Osipenko
2019-07-23 14:27                     ` Dmitry Osipenko
2019-07-23 23:39                       ` Sowjanya Komatineni
2019-07-24  9:31                         ` Dmitry Osipenko
2019-07-21 19:40 ` [PATCH V6 17/21] arm64: tegra: Enable wake from deep sleep on RTC alarm Sowjanya Komatineni
2019-07-26  6:30   ` Dmitry Osipenko
2019-07-21 19:40 ` [PATCH V6 18/21] soc/tegra: pmc: Configure core power request polarity Sowjanya Komatineni
2019-07-21 19:40 ` [PATCH V6 19/21] soc/tegra: pmc: Configure deep sleep control settings Sowjanya Komatineni
2019-07-21 19:40 ` [PATCH V6 20/21] arm64: dts: tegra210-p2180: Jetson TX1 SC7 timings Sowjanya Komatineni
2019-07-21 19:41 ` [PATCH V6 21/21] arm64: dts: tegra210-p3450: Jetson nano " Sowjanya Komatineni
2019-07-21 22:25   ` Dmitry Osipenko

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1563738060-30213-15-git-send-email-skomatineni@nvidia.com \
    --to=skomatineni@nvidia.com \
    --cc=devicetree@vger.kernel.org \
    --cc=digetx@gmail.com \
    --cc=jason@lakedaemon.net \
    --cc=jckuo@nvidia.com \
    --cc=jonathanh@nvidia.com \
    --cc=josephl@nvidia.com \
    --cc=linus.walleij@linaro.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-tegra@vger.kernel.org \
    --cc=marc.zyngier@arm.com \
    --cc=mark.rutland@arm.com \
    --cc=mperttunen@nvidia.com \
    --cc=pdeschrijver@nvidia.com \
    --cc=pgaikwad@nvidia.com \
    --cc=robh+dt@kernel.org \
    --cc=sboyd@kernel.org \
    --cc=spatra@nvidia.com \
    --cc=stefan@agner.ch \
    --cc=talho@nvidia.com \
    --cc=tglx@linutronix.de \
    --cc=thierry.reding@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).