From: Vinod Koul <vkoul@kernel.org>
To: Andy Gross <agross@kernel.org>
Cc: linux-arm-msm@vger.kernel.org,
Bjorn Andersson <bjorn.andersson@linaro.org>,
Vinod Koul <vkoul@kernel.org>, Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH 3/5] arm64: dts: qcom: sdm845: remove unit name for thermal trip points
Date: Mon, 22 Jul 2019 18:04:20 +0530 [thread overview]
Message-ID: <20190722123422.4571-4-vkoul@kernel.org> (raw)
In-Reply-To: <20190722123422.4571-1-vkoul@kernel.org>
The thermal trip points have unit name but no reg property, so we can
remove them
arch/arm64/boot/dts/qcom/sdm845.dtsi:2824.31-2828.7: Warning (unit_address_vs_reg): /thermal-zones/cpu0-thermal/trips/trip-point@0: node has a unit name, but no reg property
arch/arm64/boot/dts/qcom/sdm845.dtsi:2830.31-2834.7: Warning (unit_address_vs_reg): /thermal-zones/cpu0-thermal/trips/trip-point@1: node has a unit name, but no reg property
arch/arm64/boot/dts/qcom/sdm845.dtsi:2868.31-2872.7: Warning (unit_address_vs_reg): /thermal-zones/cpu1-thermal/trips/trip-point@0: node has a unit name, but no reg property
arch/arm64/boot/dts/qcom/sdm845.dtsi:2874.31-2878.7: Warning (unit_address_vs_reg): /thermal-zones/cpu1-thermal/trips/trip-point@1: node has a unit name, but no reg property
arch/arm64/boot/dts/qcom/sdm845.dtsi:2912.31-2916.7: Warning (unit_address_vs_reg): /thermal-zones/cpu2-thermal/trips/trip-point@0: node has a unit name, but no reg property
arch/arm64/boot/dts/qcom/sdm845.dtsi:2918.31-2922.7: Warning (unit_address_vs_reg): /thermal-zones/cpu2-thermal/trips/trip-point@1: node has a unit name, but no reg property
arch/arm64/boot/dts/qcom/sdm845.dtsi:2956.31-2960.7: Warning (unit_address_vs_reg): /thermal-zones/cpu3-thermal/trips/trip-point@0: node has a unit name, but no reg property
arch/arm64/boot/dts/qcom/sdm845.dtsi:2962.31-2966.7: Warning (unit_address_vs_reg): /thermal-zones/cpu3-thermal/trips/trip-point@1: node has a unit name, but no reg property
arch/arm64/boot/dts/qcom/sdm845.dtsi:3000.31-3004.7: Warning (unit_address_vs_reg): /thermal-zones/cpu4-thermal/trips/trip-point@0: node has a unit name, but no reg property
arch/arm64/boot/dts/qcom/sdm845.dtsi:3006.31-3010.7: Warning (unit_address_vs_reg): /thermal-zones/cpu4-thermal/trips/trip-point@1: node has a unit name, but no reg property
arch/arm64/boot/dts/qcom/sdm845.dtsi:3044.31-3048.7: Warning (unit_address_vs_reg): /thermal-zones/cpu5-thermal/trips/trip-point@0: node has a unit name, but no reg property
arch/arm64/boot/dts/qcom/sdm845.dtsi:3050.31-3054.7: Warning (unit_address_vs_reg): /thermal-zones/cpu5-thermal/trips/trip-point@1: node has a unit name, but no reg property
arch/arm64/boot/dts/qcom/sdm845.dtsi:3088.31-3092.7: Warning (unit_address_vs_reg): /thermal-zones/cpu6-thermal/trips/trip-point@0: node has a unit name, but no reg property
arch/arm64/boot/dts/qcom/sdm845.dtsi:3094.31-3098.7: Warning (unit_address_vs_reg): /thermal-zones/cpu6-thermal/trips/trip-point@1: node has a unit name, but no reg property
arch/arm64/boot/dts/qcom/sdm845.dtsi:3132.31-3136.7: Warning (unit_address_vs_reg): /thermal-zones/cpu7-thermal/trips/trip-point@0: node has a unit name, but no reg property
arch/arm64/boot/dts/qcom/sdm845.dtsi:3138.31-3142.7: Warning (unit_address_vs_reg): /thermal-zones/cpu7-thermal/trips/trip-point@1: node has a unit name, but no reg property
arch/arm64/boot/dts/qcom/sdm845.dtsi:3176.32-3180.7: Warning (unit_address_vs_reg): /thermal-zones/aoss0-thermal/trips/trip-point@0: node has a unit name, but no reg property
arch/arm64/boot/dts/qcom/sdm845.dtsi:3191.35-3195.7: Warning (unit_address_vs_reg): /thermal-zones/cluster0-thermal/trips/trip-point@0: node has a unit name, but no reg property
arch/arm64/boot/dts/qcom/sdm845.dtsi:3211.35-3215.7: Warning (unit_address_vs_reg): /thermal-zones/cluster1-thermal/trips/trip-point@0: node has a unit name, but no reg property
arch/arm64/boot/dts/qcom/sdm845.dtsi:3231.31-3235.7: Warning (unit_address_vs_reg): /thermal-zones/gpu-thermal-top/trips/trip-point@0: node has a unit name, but no reg property
arch/arm64/boot/dts/qcom/sdm845.dtsi:3246.31-3250.7: Warning (unit_address_vs_reg): /thermal-zones/gpu-thermal-bottom/trips/trip-point@0: node has a unit name, but no reg property
arch/arm64/boot/dts/qcom/sdm845.dtsi:3261.32-3265.7: Warning (unit_address_vs_reg): /thermal-zones/aoss1-thermal/trips/trip-point@0: node has a unit name, but no reg property
arch/arm64/boot/dts/qcom/sdm845.dtsi:3276.35-3280.7: Warning (unit_address_vs_reg): /thermal-zones/q6-modem-thermal/trips/trip-point@0: node has a unit name, but no reg property
arch/arm64/boot/dts/qcom/sdm845.dtsi:3291.30-3295.7: Warning (unit_address_vs_reg): /thermal-zones/mem-thermal/trips/trip-point@0: node has a unit name, but no reg property
arch/arm64/boot/dts/qcom/sdm845.dtsi:3306.31-3310.7: Warning (unit_address_vs_reg): /thermal-zones/wlan-thermal/trips/trip-point@0: node has a unit name, but no reg property
arch/arm64/boot/dts/qcom/sdm845.dtsi:3321.33-3325.7: Warning (unit_address_vs_reg): /thermal-zones/q6-hvx-thermal/trips/trip-point@0: node has a unit name, but no reg property
arch/arm64/boot/dts/qcom/sdm845.dtsi:3336.33-3340.7: Warning (unit_address_vs_reg): /thermal-zones/camera-thermal/trips/trip-point@0: node has a unit name, but no reg property
arch/arm64/boot/dts/qcom/sdm845.dtsi:3351.32-3355.7: Warning (unit_address_vs_reg): /thermal-zones/video-thermal/trips/trip-point@0: node has a unit name, but no reg property
arch/arm64/boot/dts/qcom/sdm845.dtsi:3366.32-3370.7: Warning (unit_address_vs_reg): /thermal-zones/modem-thermal/trips/trip-point@0: node has a unit name, but no reg property
Signed-off-by: Vinod Koul <vkoul@kernel.org>
---
arch/arm64/boot/dts/qcom/sdm845.dtsi | 58 ++++++++++++++--------------
1 file changed, 29 insertions(+), 29 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index 2985df032179..48bd07646eb4 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -2815,13 +2815,13 @@
thermal-sensors = <&tsens0 1>;
trips {
- cpu0_alert0: trip-point@0 {
+ cpu0_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "passive";
};
- cpu0_alert1: trip-point@1 {
+ cpu0_alert1: trip-point1 {
temperature = <95000>;
hysteresis = <2000>;
type = "passive";
@@ -2859,13 +2859,13 @@
thermal-sensors = <&tsens0 2>;
trips {
- cpu1_alert0: trip-point@0 {
+ cpu1_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "passive";
};
- cpu1_alert1: trip-point@1 {
+ cpu1_alert1: trip-point1 {
temperature = <95000>;
hysteresis = <2000>;
type = "passive";
@@ -2903,13 +2903,13 @@
thermal-sensors = <&tsens0 3>;
trips {
- cpu2_alert0: trip-point@0 {
+ cpu2_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "passive";
};
- cpu2_alert1: trip-point@1 {
+ cpu2_alert1: trip-point1 {
temperature = <95000>;
hysteresis = <2000>;
type = "passive";
@@ -2947,13 +2947,13 @@
thermal-sensors = <&tsens0 4>;
trips {
- cpu3_alert0: trip-point@0 {
+ cpu3_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "passive";
};
- cpu3_alert1: trip-point@1 {
+ cpu3_alert1: trip-point1 {
temperature = <95000>;
hysteresis = <2000>;
type = "passive";
@@ -2991,13 +2991,13 @@
thermal-sensors = <&tsens0 7>;
trips {
- cpu4_alert0: trip-point@0 {
+ cpu4_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "passive";
};
- cpu4_alert1: trip-point@1 {
+ cpu4_alert1: trip-point1 {
temperature = <95000>;
hysteresis = <2000>;
type = "passive";
@@ -3035,13 +3035,13 @@
thermal-sensors = <&tsens0 8>;
trips {
- cpu5_alert0: trip-point@0 {
+ cpu5_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "passive";
};
- cpu5_alert1: trip-point@1 {
+ cpu5_alert1: trip-point1 {
temperature = <95000>;
hysteresis = <2000>;
type = "passive";
@@ -3079,13 +3079,13 @@
thermal-sensors = <&tsens0 9>;
trips {
- cpu6_alert0: trip-point@0 {
+ cpu6_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "passive";
};
- cpu6_alert1: trip-point@1 {
+ cpu6_alert1: trip-point1 {
temperature = <95000>;
hysteresis = <2000>;
type = "passive";
@@ -3123,13 +3123,13 @@
thermal-sensors = <&tsens0 10>;
trips {
- cpu7_alert0: trip-point@0 {
+ cpu7_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "passive";
};
- cpu7_alert1: trip-point@1 {
+ cpu7_alert1: trip-point1 {
temperature = <95000>;
hysteresis = <2000>;
type = "passive";
@@ -3167,7 +3167,7 @@
thermal-sensors = <&tsens0 0>;
trips {
- aoss0_alert0: trip-point@0 {
+ aoss0_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "hot";
@@ -3182,7 +3182,7 @@
thermal-sensors = <&tsens0 5>;
trips {
- cluster0_alert0: trip-point@0 {
+ cluster0_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "hot";
@@ -3202,7 +3202,7 @@
thermal-sensors = <&tsens0 6>;
trips {
- cluster1_alert0: trip-point@0 {
+ cluster1_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "hot";
@@ -3222,7 +3222,7 @@
thermal-sensors = <&tsens0 11>;
trips {
- gpu1_alert0: trip-point@0 {
+ gpu1_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "hot";
@@ -3237,7 +3237,7 @@
thermal-sensors = <&tsens0 12>;
trips {
- gpu2_alert0: trip-point@0 {
+ gpu2_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "hot";
@@ -3252,7 +3252,7 @@
thermal-sensors = <&tsens1 0>;
trips {
- aoss1_alert0: trip-point@0 {
+ aoss1_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "hot";
@@ -3267,7 +3267,7 @@
thermal-sensors = <&tsens1 1>;
trips {
- q6_modem_alert0: trip-point@0 {
+ q6_modem_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "hot";
@@ -3282,7 +3282,7 @@
thermal-sensors = <&tsens1 2>;
trips {
- mem_alert0: trip-point@0 {
+ mem_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "hot";
@@ -3297,7 +3297,7 @@
thermal-sensors = <&tsens1 3>;
trips {
- wlan_alert0: trip-point@0 {
+ wlan_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "hot";
@@ -3312,7 +3312,7 @@
thermal-sensors = <&tsens1 4>;
trips {
- q6_hvx_alert0: trip-point@0 {
+ q6_hvx_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "hot";
@@ -3327,7 +3327,7 @@
thermal-sensors = <&tsens1 5>;
trips {
- camera_alert0: trip-point@0 {
+ camera_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "hot";
@@ -3342,7 +3342,7 @@
thermal-sensors = <&tsens1 6>;
trips {
- video_alert0: trip-point@0 {
+ video_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "hot";
@@ -3357,7 +3357,7 @@
thermal-sensors = <&tsens1 7>;
trips {
- modem_alert0: trip-point@0 {
+ modem_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "hot";
--
2.20.1
next prev parent reply other threads:[~2019-07-22 12:36 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-07-22 12:34 [PATCH 0/5] arm64: dts: qcom: sdm845: Fix DTS warnings Vinod Koul
2019-07-22 12:34 ` [PATCH 1/5] arm64: dts: qcom: sdm845: Add unit name to soc node Vinod Koul
2019-07-23 14:50 ` Stephen Boyd
2019-07-24 4:07 ` Vinod Koul
2019-07-22 12:34 ` [PATCH 2/5] arm64: dts: qcom: sdm845: remove unnecessary properties for dsi nodes Vinod Koul
2019-07-23 14:45 ` Stephen Boyd
2019-07-22 12:34 ` Vinod Koul [this message]
2019-07-23 14:47 ` [PATCH 3/5] arm64: dts: qcom: sdm845: remove unit name for thermal trip points Stephen Boyd
2019-07-22 12:34 ` [PATCH 4/5] arm64: dts: qcom: sdm845: remove macro from unit name Vinod Koul
2019-07-22 12:34 ` [PATCH 5/5] arm64: dts: qcom: sdm845-cheza: " Vinod Koul
2019-07-23 5:08 ` Amit Kucheria
2019-07-23 5:14 ` Vinod Koul
2019-07-23 5:41 ` Bjorn Andersson
2019-07-23 14:51 ` Stephen Boyd
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190722123422.4571-4-vkoul@kernel.org \
--to=vkoul@kernel.org \
--cc=agross@kernel.org \
--cc=bjorn.andersson@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).