[v5,07/11] mfd: cros_ec: Use kzalloc and cros_ec_cmd_xfer_status helper
diff mbox series

Message ID 20190722133257.9336-8-enric.balletbo@collabora.com
State New
Headers show
Series
  • Move part of cros-ec out of MFD subsystem
Related show

Commit Message

Enric Balletbo i Serra July 22, 2019, 1:32 p.m. UTC
This patch makes use of cros_ec_cmd_xfer_status() instead of
cros_ec_cmd_xfer() so we can remove some redundant code. It also uses
kzalloc instead of kmalloc so we can remove more redundant code.

Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Gwendal Grignou <gwendal@chromium.org>
Tested-by: Gwendal Grignou <gwendal@chromium.org>
---

Changes in v5: None
Changes in v4: None
Changes in v3: None
Changes in v2: None

 drivers/mfd/cros_ec_dev.c | 17 +++++++----------
 1 file changed, 7 insertions(+), 10 deletions(-)

Comments

Lee Jones Aug. 12, 2019, 7:25 a.m. UTC | #1
On Mon, 22 Jul 2019, Enric Balletbo i Serra wrote:

> This patch makes use of cros_ec_cmd_xfer_status() instead of
> cros_ec_cmd_xfer() so we can remove some redundant code. It also uses
> kzalloc instead of kmalloc so we can remove more redundant code.
> 
> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
> Reviewed-by: Gwendal Grignou <gwendal@chromium.org>
> Tested-by: Gwendal Grignou <gwendal@chromium.org>
> ---
> 
> Changes in v5: None
> Changes in v4: None
> Changes in v3: None
> Changes in v2: None
> 
>  drivers/mfd/cros_ec_dev.c | 17 +++++++----------
>  1 file changed, 7 insertions(+), 10 deletions(-)

For my own reference:
  Acked-for-MFD-by: Lee Jones <lee.jones@linaro.org>

Patch
diff mbox series

diff --git a/drivers/mfd/cros_ec_dev.c b/drivers/mfd/cros_ec_dev.c
index 4300ad919d74..c6bf52d795f2 100644
--- a/drivers/mfd/cros_ec_dev.c
+++ b/drivers/mfd/cros_ec_dev.c
@@ -29,18 +29,15 @@  static int cros_ec_check_features(struct cros_ec_dev *ec, int feature)
 
 	if (ec->features[0] == -1U && ec->features[1] == -1U) {
 		/* features bitmap not read yet */
-
-		msg = kmalloc(sizeof(*msg) + sizeof(ec->features), GFP_KERNEL);
+		msg = kzalloc(sizeof(*msg) + sizeof(ec->features), GFP_KERNEL);
 		if (!msg)
 			return -ENOMEM;
 
-		msg->version = 0;
 		msg->command = EC_CMD_GET_FEATURES + ec->cmd_offset;
 		msg->insize = sizeof(ec->features);
-		msg->outsize = 0;
 
-		ret = cros_ec_cmd_xfer(ec->ec_dev, msg);
-		if (ret < 0 || msg->result != EC_RES_SUCCESS) {
+		ret = cros_ec_cmd_xfer_status(ec->ec_dev, msg);
+		if (ret < 0) {
 			dev_warn(ec->dev, "cannot get EC features: %d/%d\n",
 				 ret, msg->result);
 			memset(ec->features, 0, sizeof(ec->features));
@@ -89,8 +86,8 @@  static void cros_ec_sensors_register(struct cros_ec_dev *ec)
 	params = (struct ec_params_motion_sense *)msg->data;
 	params->cmd = MOTIONSENSE_CMD_DUMP;
 
-	ret = cros_ec_cmd_xfer(ec->ec_dev, msg);
-	if (ret < 0 || msg->result != EC_RES_SUCCESS) {
+	ret = cros_ec_cmd_xfer_status(ec->ec_dev, msg);
+	if (ret < 0) {
 		dev_warn(ec->dev, "cannot get EC sensor information: %d/%d\n",
 			 ret, msg->result);
 		goto error;
@@ -117,8 +114,8 @@  static void cros_ec_sensors_register(struct cros_ec_dev *ec)
 	for (i = 0; i < sensor_num; i++) {
 		params->cmd = MOTIONSENSE_CMD_INFO;
 		params->info.sensor_num = i;
-		ret = cros_ec_cmd_xfer(ec->ec_dev, msg);
-		if (ret < 0 || msg->result != EC_RES_SUCCESS) {
+		ret = cros_ec_cmd_xfer_status(ec->ec_dev, msg);
+		if (ret < 0) {
 			dev_warn(ec->dev, "no info for EC sensor %d : %d/%d\n",
 				 i, ret, msg->result);
 			continue;