From: "Michał Mirosław" <mirq-linux@rere.qmqm.pl>
To: linux-kernel@vger.kernel.org
Cc: Liam Girdwood <lgirdwood@gmail.com>, Mark Brown <broonie@kernel.org>
Subject: [PATCH] regulator: act8865: support regulator-pull-down property
Date: Mon, 22 Jul 2019 20:13:29 +0200 [thread overview]
Message-ID: <d02d7285ef26f59ce43a3097e342eea081b98444.1563819128.git.mirq-linux@rere.qmqm.pl> (raw)
AC8865 has internal 1.5k pull-down resistor that can be enabled when LDO
is shut down.
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
---
* against broonie/regulator/for-next tree
---
drivers/regulator/act8865-regulator.c | 45 ++++++++++++++++++++-------
1 file changed, 33 insertions(+), 12 deletions(-)
diff --git a/drivers/regulator/act8865-regulator.c b/drivers/regulator/act8865-regulator.c
index cf72d7c6b8c9..921f8f03b84e 100644
--- a/drivers/regulator/act8865-regulator.c
+++ b/drivers/regulator/act8865-regulator.c
@@ -112,6 +112,8 @@
* Field Definitions.
*/
#define ACT8865_ENA 0x80 /* ON - [7] */
+#define ACT8865_DIS 0x40 /* DIS - [6] */
+
#define ACT8865_VSEL_MASK 0x3F /* VSET - [5:0] */
@@ -228,12 +230,23 @@ static const struct regulator_ops act8865_ops = {
};
static const struct regulator_ops act8865_ldo_ops = {
+ .list_voltage = regulator_list_voltage_linear_range,
+ .map_voltage = regulator_map_voltage_linear_range,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.is_enabled = regulator_is_enabled_regmap,
+ .set_pull_down = regulator_set_pull_down_regmap,
};
-#define ACT88xx_REG(_name, _family, _id, _vsel_reg, _supply) \
+static const struct regulator_ops act8865_fixed_ldo_ops = {
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .is_enabled = regulator_is_enabled_regmap,
+};
+
+#define ACT88xx_REG_(_name, _family, _id, _vsel_reg, _supply, _ops) \
[_family##_ID_##_id] = { \
.name = _name, \
.of_match = of_match_ptr(_name), \
@@ -241,7 +254,7 @@ static const struct regulator_ops act8865_ldo_ops = {
.supply_name = _supply, \
.id = _family##_ID_##_id, \
.type = REGULATOR_VOLTAGE, \
- .ops = &act8865_ops, \
+ .ops = _ops, \
.n_voltages = ACT8865_VOLTAGE_NUM, \
.linear_ranges = act8865_voltage_ranges, \
.n_linear_ranges = ARRAY_SIZE(act8865_voltage_ranges), \
@@ -249,9 +262,17 @@ static const struct regulator_ops act8865_ldo_ops = {
.vsel_mask = ACT8865_VSEL_MASK, \
.enable_reg = _family##_##_id##_CTRL, \
.enable_mask = ACT8865_ENA, \
+ .pull_down_reg = _family##_##_id##_CTRL, \
+ .pull_down_mask = ACT8865_DIS, \
.owner = THIS_MODULE, \
}
+#define ACT88xx_REG(_name, _family, _id, _vsel_reg, _supply) \
+ ACT88xx_REG_(_name, _family, _id, _vsel_reg, _supply, &act8865_ops)
+
+#define ACT88xx_LDO(_name, _family, _id, _vsel_reg, _supply) \
+ ACT88xx_REG_(_name, _family, _id, _vsel_reg, _supply, &act8865_ldo_ops)
+
static const struct regulator_desc act8600_regulators[] = {
ACT88xx_REG("DCDC1", ACT8600, DCDC1, VSET, "vp1"),
ACT88xx_REG("DCDC2", ACT8600, DCDC2, VSET, "vp2"),
@@ -281,7 +302,7 @@ static const struct regulator_desc act8600_regulators[] = {
.of_match = of_match_ptr("LDO_REG9"),
.regulators_node = of_match_ptr("regulators"),
.id = ACT8600_ID_LDO9,
- .ops = &act8865_ldo_ops,
+ .ops = &act8865_fixed_ldo_ops,
.type = REGULATOR_VOLTAGE,
.n_voltages = 1,
.fixed_uV = 3300000,
@@ -294,7 +315,7 @@ static const struct regulator_desc act8600_regulators[] = {
.of_match = of_match_ptr("LDO_REG10"),
.regulators_node = of_match_ptr("regulators"),
.id = ACT8600_ID_LDO10,
- .ops = &act8865_ldo_ops,
+ .ops = &act8865_fixed_ldo_ops,
.type = REGULATOR_VOLTAGE,
.n_voltages = 1,
.fixed_uV = 1200000,
@@ -323,20 +344,20 @@ static const struct regulator_desc act8865_regulators[] = {
ACT88xx_REG("DCDC_REG1", ACT8865, DCDC1, VSET1, "vp1"),
ACT88xx_REG("DCDC_REG2", ACT8865, DCDC2, VSET1, "vp2"),
ACT88xx_REG("DCDC_REG3", ACT8865, DCDC3, VSET1, "vp3"),
- ACT88xx_REG("LDO_REG1", ACT8865, LDO1, VSET, "inl45"),
- ACT88xx_REG("LDO_REG2", ACT8865, LDO2, VSET, "inl45"),
- ACT88xx_REG("LDO_REG3", ACT8865, LDO3, VSET, "inl67"),
- ACT88xx_REG("LDO_REG4", ACT8865, LDO4, VSET, "inl67"),
+ ACT88xx_LDO("LDO_REG1", ACT8865, LDO1, VSET, "inl45"),
+ ACT88xx_LDO("LDO_REG2", ACT8865, LDO2, VSET, "inl45"),
+ ACT88xx_LDO("LDO_REG3", ACT8865, LDO3, VSET, "inl67"),
+ ACT88xx_LDO("LDO_REG4", ACT8865, LDO4, VSET, "inl67"),
};
static const struct regulator_desc act8865_alt_regulators[] = {
ACT88xx_REG("DCDC_REG1", ACT8865, DCDC1, VSET2, "vp1"),
ACT88xx_REG("DCDC_REG2", ACT8865, DCDC2, VSET2, "vp2"),
ACT88xx_REG("DCDC_REG3", ACT8865, DCDC3, VSET2, "vp3"),
- ACT88xx_REG("LDO_REG1", ACT8865, LDO1, VSET, "inl45"),
- ACT88xx_REG("LDO_REG2", ACT8865, LDO2, VSET, "inl45"),
- ACT88xx_REG("LDO_REG3", ACT8865, LDO3, VSET, "inl67"),
- ACT88xx_REG("LDO_REG4", ACT8865, LDO4, VSET, "inl67"),
+ ACT88xx_LDO("LDO_REG1", ACT8865, LDO1, VSET, "inl45"),
+ ACT88xx_LDO("LDO_REG2", ACT8865, LDO2, VSET, "inl45"),
+ ACT88xx_LDO("LDO_REG3", ACT8865, LDO3, VSET, "inl67"),
+ ACT88xx_LDO("LDO_REG4", ACT8865, LDO4, VSET, "inl67"),
};
#ifdef CONFIG_OF
--
2.20.1
next reply other threads:[~2019-07-22 18:13 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-07-22 18:13 Michał Mirosław [this message]
2019-07-23 10:54 ` [PATCH] regulator: act8865: support regulator-pull-down property Mark Brown
2019-07-23 12:09 ` Michał Mirosław
2019-07-23 14:39 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=d02d7285ef26f59ce43a3097e342eea081b98444.1563819128.git.mirq-linux@rere.qmqm.pl \
--to=mirq-linux@rere.qmqm.pl \
--cc=broonie@kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).