linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Lina Iyer <ilina@codeaurora.org>
To: agross@kernel.org, bjorn.andersson@linaro.org, swboyd@chromium.org
Cc: linux-arm-msm@vger.kernel.org, linux-soc@vger.kernel.org,
	rnayak@codeaurora.org, linux-kernel@vger.kernel.org,
	linux-pm@vger.kernel.org, dianders@chromium.org,
	mkshah@codeaurora.org,
	"Raju P.L.S.S.S.N" <rplsssn@codeaurora.org>,
	Lina Iyer <ilina@codeaurora.org>
Subject: [PATCH V2 3/4] drivers: qcom: rpmh: switch over from spinlock irq variants
Date: Mon, 22 Jul 2019 15:53:39 -0600	[thread overview]
Message-ID: <20190722215340.3071-3-ilina@codeaurora.org> (raw)
In-Reply-To: <20190722215340.3071-1-ilina@codeaurora.org>

From: "Raju P.L.S.S.S.N" <rplsssn@codeaurora.org>

Switch over from using _irqsave/_irqrestore variants since we no longer
race with a lock from the interrupt handler. While we are at it, rename
the cache_lock to just lock to allow use of the lock to synchronize
controller access.

Signed-off-by: Raju P.L.S.S.S.N <rplsssn@codeaurora.org>
Signed-off-by: Lina Iyer <ilina@codeaurora.org>
---
 drivers/soc/qcom/rpmh-internal.h |  4 ++--
 drivers/soc/qcom/rpmh-rsc.c      |  2 +-
 drivers/soc/qcom/rpmh.c          | 21 ++++++++-------------
 3 files changed, 11 insertions(+), 16 deletions(-)

diff --git a/drivers/soc/qcom/rpmh-internal.h b/drivers/soc/qcom/rpmh-internal.h
index 969d5030860e..93d59db435bb 100644
--- a/drivers/soc/qcom/rpmh-internal.h
+++ b/drivers/soc/qcom/rpmh-internal.h
@@ -67,13 +67,13 @@ struct rpmh_request {
  * struct rpmh_ctrlr: our representation of the controller
  *
  * @cache: the list of cached requests
- * @cache_lock: synchronize access to the cache data
+ * @lock: synchronize access to the controller data
  * @dirty: was the cache updated since flush
  * @batch_cache: Cache sleep and wake requests sent as batch
  */
 struct rpmh_ctrlr {
 	struct list_head cache;
-	spinlock_t cache_lock;
+	spinlock_t lock;
 	bool dirty;
 	struct list_head batch_cache;
 };
diff --git a/drivers/soc/qcom/rpmh-rsc.c b/drivers/soc/qcom/rpmh-rsc.c
index 694ba881624e..add5e84751c9 100644
--- a/drivers/soc/qcom/rpmh-rsc.c
+++ b/drivers/soc/qcom/rpmh-rsc.c
@@ -656,7 +656,7 @@ static int rpmh_rsc_probe(struct platform_device *pdev)
 	/* Enable the active TCS to send requests immediately */
 	write_tcs_reg(drv, RSC_DRV_IRQ_ENABLE, 0, drv->tcs[ACTIVE_TCS].mask);
 
-	spin_lock_init(&drv->client.cache_lock);
+	spin_lock_init(&drv->client.lock);
 	INIT_LIST_HEAD(&drv->client.cache);
 	INIT_LIST_HEAD(&drv->client.batch_cache);
 
diff --git a/drivers/soc/qcom/rpmh.c b/drivers/soc/qcom/rpmh.c
index 035091fd44b8..d6fb254a4b57 100644
--- a/drivers/soc/qcom/rpmh.c
+++ b/drivers/soc/qcom/rpmh.c
@@ -118,9 +118,8 @@ static struct cache_req *cache_rpm_request(struct rpmh_ctrlr *ctrlr,
 					   struct tcs_cmd *cmd)
 {
 	struct cache_req *req;
-	unsigned long flags;
 
-	spin_lock_irqsave(&ctrlr->cache_lock, flags);
+	spin_lock(&ctrlr->lock);
 	req = __find_req(ctrlr, cmd->addr);
 	if (req)
 		goto existing;
@@ -154,7 +153,7 @@ static struct cache_req *cache_rpm_request(struct rpmh_ctrlr *ctrlr,
 
 	ctrlr->dirty = true;
 unlock:
-	spin_unlock_irqrestore(&ctrlr->cache_lock, flags);
+	spin_unlock(&ctrlr->lock);
 
 	return req;
 }
@@ -283,23 +282,20 @@ EXPORT_SYMBOL(rpmh_write);
 
 static void cache_batch(struct rpmh_ctrlr *ctrlr, struct batch_cache_req *req)
 {
-	unsigned long flags;
-
-	spin_lock_irqsave(&ctrlr->cache_lock, flags);
+	spin_lock(&ctrlr->lock);
 	list_add_tail(&req->list, &ctrlr->batch_cache);
-	spin_unlock_irqrestore(&ctrlr->cache_lock, flags);
+	spin_unlock(&ctrlr->lock);
 }
 
 static int flush_batch(struct rpmh_ctrlr *ctrlr)
 {
 	struct batch_cache_req *req;
 	const struct rpmh_request *rpm_msg;
-	unsigned long flags;
 	int ret = 0;
 	int i;
 
 	/* Send Sleep/Wake requests to the controller, expect no response */
-	spin_lock_irqsave(&ctrlr->cache_lock, flags);
+	spin_lock(&ctrlr->lock);
 	list_for_each_entry(req, &ctrlr->batch_cache, list) {
 		for (i = 0; i < req->count; i++) {
 			rpm_msg = req->rpm_msgs + i;
@@ -309,7 +305,7 @@ static int flush_batch(struct rpmh_ctrlr *ctrlr)
 				break;
 		}
 	}
-	spin_unlock_irqrestore(&ctrlr->cache_lock, flags);
+	spin_unlock(&ctrlr->lock);
 
 	return ret;
 }
@@ -317,13 +313,12 @@ static int flush_batch(struct rpmh_ctrlr *ctrlr)
 static void invalidate_batch(struct rpmh_ctrlr *ctrlr)
 {
 	struct batch_cache_req *req, *tmp;
-	unsigned long flags;
 
-	spin_lock_irqsave(&ctrlr->cache_lock, flags);
+	spin_lock(&ctrlr->lock);
 	list_for_each_entry_safe(req, tmp, &ctrlr->batch_cache, list)
 		kfree(req);
 	INIT_LIST_HEAD(&ctrlr->batch_cache);
-	spin_unlock_irqrestore(&ctrlr->cache_lock, flags);
+	spin_unlock(&ctrlr->lock);
 }
 
 /**
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project


  parent reply	other threads:[~2019-07-22 21:54 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-07-22 21:53 [PATCH V2 1/4] drivers: qcom: rpmh-rsc: simplify TCS locking Lina Iyer
2019-07-22 21:53 ` [PATCH V2 2/4] drivers: qcom: rpmh-rsc: avoid locking in the interrupt handler Lina Iyer
2019-07-23 20:11   ` Stephen Boyd
2019-07-24 14:52     ` Lina Iyer
2019-07-24 19:37       ` Stephen Boyd
2019-07-24 20:36         ` Lina Iyer
2019-07-24 23:27           ` Doug Anderson
2019-07-25 15:18             ` Lina Iyer
2019-07-25 15:39               ` Doug Anderson
2019-07-29 19:01                 ` Lina Iyer
2019-07-29 20:56                   ` Stephen Boyd
2019-07-30 17:29                     ` Lina Iyer
2019-07-22 21:53 ` Lina Iyer [this message]
2019-07-23 18:24   ` [PATCH V2 3/4] drivers: qcom: rpmh: switch over from spinlock irq variants Stephen Boyd
2019-07-22 21:53 ` [PATCH V2 4/4] drivers: qcom: rpmh-rsc: remove redundant register access Lina Iyer
2019-07-23 18:22 ` [PATCH V2 1/4] drivers: qcom: rpmh-rsc: simplify TCS locking Stephen Boyd
2019-07-23 19:21   ` Lina Iyer
2019-07-23 20:18     ` Stephen Boyd
2019-07-24 14:54       ` Lina Iyer
2019-07-24 18:32         ` Stephen Boyd
2019-07-24 19:36           ` Lina Iyer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190722215340.3071-3-ilina@codeaurora.org \
    --to=ilina@codeaurora.org \
    --cc=agross@kernel.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=dianders@chromium.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=linux-soc@vger.kernel.org \
    --cc=mkshah@codeaurora.org \
    --cc=rnayak@codeaurora.org \
    --cc=rplsssn@codeaurora.org \
    --cc=swboyd@chromium.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).