linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Daniel Baluta <daniel.baluta@nxp.com>
To: m.felsch@pengutronix.de, shawnguo@kernel.org
Cc: mark.rutland@arm.com, aisheng.dong@nxp.com, peng.fan@nxp.com,
	anson.huang@nxp.com, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, linux-imx@nxp.com,
	shengjiu.wang@nxp.com, paul.olaru@nxp.com, robh+dt@kernel.org,
	kernel@pengutronix.de, leonard.crestez@nxp.com,
	festevam@gmail.com, linux-arm-kernel@lists.infradead.org,
	sound-open-firmware@alsa-project.org,
	Daniel Baluta <daniel.baluta@nxp.com>
Subject: [PATCH v2 1/5] ASoC: SOF: imx: Add i.MX8 HW support
Date: Tue, 23 Jul 2019 11:41:00 +0300	[thread overview]
Message-ID: <20190723084104.12639-2-daniel.baluta@nxp.com> (raw)
In-Reply-To: <20190723084104.12639-1-daniel.baluta@nxp.com>

Add support for the audio DSP hardware found on NXP i.MX8 platform.

Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
---
- This is also on review with SOF community here:
https://github.com/thesofproject/linux/pull/1048

 sound/soc/sof/Kconfig      |   1 +
 sound/soc/sof/Makefile     |   1 +
 sound/soc/sof/imx/Kconfig  |  20 ++
 sound/soc/sof/imx/Makefile |   7 +
 sound/soc/sof/imx/imx8.c   | 464 +++++++++++++++++++++++++++++++++++++
 5 files changed, 493 insertions(+)
 create mode 100644 sound/soc/sof/imx/Kconfig
 create mode 100644 sound/soc/sof/imx/Makefile
 create mode 100644 sound/soc/sof/imx/imx8.c

diff --git a/sound/soc/sof/Kconfig b/sound/soc/sof/Kconfig
index fb01f0ca6027..61b97fc55bb2 100644
--- a/sound/soc/sof/Kconfig
+++ b/sound/soc/sof/Kconfig
@@ -163,6 +163,7 @@ config SND_SOC_SOF_PROBE_WORK_QUEUE
 	  When selected, the probe is handled in two steps, for example to
 	  avoid lockdeps if request_module is used in the probe.
 
+source "sound/soc/sof/imx/Kconfig"
 source "sound/soc/sof/intel/Kconfig"
 source "sound/soc/sof/xtensa/Kconfig"
 
diff --git a/sound/soc/sof/Makefile b/sound/soc/sof/Makefile
index 8f14c9d2950b..6e43d411ffef 100644
--- a/sound/soc/sof/Makefile
+++ b/sound/soc/sof/Makefile
@@ -15,4 +15,5 @@ obj-$(CONFIG_SND_SOC_SOF_ACPI) += sof-acpi-dev.o
 obj-$(CONFIG_SND_SOC_SOF_PCI) += sof-pci-dev.o
 
 obj-$(CONFIG_SND_SOC_SOF_INTEL_TOPLEVEL) += intel/
+obj-$(CONFIG_SND_SOC_SOF_IMX_TOPLEVEL) += imx/
 obj-$(CONFIG_SND_SOC_SOF_XTENSA) += xtensa/
diff --git a/sound/soc/sof/imx/Kconfig b/sound/soc/sof/imx/Kconfig
new file mode 100644
index 000000000000..fff64a9970f0
--- /dev/null
+++ b/sound/soc/sof/imx/Kconfig
@@ -0,0 +1,20 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
+
+config SND_SOC_SOF_IMX_TOPLEVEL
+	bool "SOF support for NXP i.MX audio DSPs"
+	depends on ARM64 || COMPILE_TEST
+	help
+          This adds support for Sound Open Firmware for NXP i.MX platforms.
+          Say Y if you have such a device.
+          If unsure select "N".
+
+if SND_SOC_SOF_IMX_TOPLEVEL
+
+config SND_SOC_SOF_IMX8
+	tristate "SOF support for i.MX8"
+	help
+          This adds support for Sound Open Firmware for NXP i.MX8 platforms
+          Say Y if you have such a device.
+          If unsure select "N".
+
+endif ## SND_SOC_SOF_IMX_IMX_TOPLEVEL
diff --git a/sound/soc/sof/imx/Makefile b/sound/soc/sof/imx/Makefile
new file mode 100644
index 000000000000..c69237971da5
--- /dev/null
+++ b/sound/soc/sof/imx/Makefile
@@ -0,0 +1,7 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
+
+ccflags-y += -DDEBUG
+
+snd-sof-imx8-objs := imx8.o
+
+obj-$(CONFIG_SND_SOC_SOF_IMX8) += snd-sof-imx8.o
diff --git a/sound/soc/sof/imx/imx8.c b/sound/soc/sof/imx/imx8.c
new file mode 100644
index 000000000000..086606aa4b20
--- /dev/null
+++ b/sound/soc/sof/imx/imx8.c
@@ -0,0 +1,464 @@
+// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
+//
+// Copyright 2019 NXP
+//
+// Author: Daniel Baluta <daniel.baluta@nxp.com>
+//
+// Hardware interface for audio DSP on i.MX8
+
+#include <linux/firmware.h>
+#include <linux/of_platform.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/pm_domain.h>
+
+#include <linux/module.h>
+#include <sound/sof.h>
+#include <sound/sof/xtensa.h>
+#include <linux/firmware/imx/ipc.h>
+#include <linux/firmware/imx/dsp.h>
+
+#include <linux/firmware/imx/svc/misc.h>
+#include <dt-bindings/firmware/imx/rsrc.h>
+#include "../ops.h"
+
+/* DSP memories */
+#define IRAM_OFFSET		0x10000
+#define IRAM_SIZE		(2 * 1024)
+#define DRAM0_OFFSET		0x0
+#define DRAM0_SIZE		(32 * 1024)
+#define DRAM1_OFFSET		0x8000
+#define DRAM1_SIZE		(32 * 1024)
+#define SYSRAM_OFFSET		0x18000
+#define SYSRAM_SIZE		(256 * 1024)
+#define SYSROM_OFFSET		0x58000
+#define SYSROM_SIZE		(192 * 1024)
+
+#define RESET_VECTOR_VADDR	0x596f8000
+
+#define MBOX_OFFSET	0x800000
+#define MBOX_SIZE	0x1000
+
+struct imx8_priv {
+	struct device *dev;
+	struct snd_sof_dev *sdev;
+	struct imx_dsp_ipc *dsp_ipc;
+	struct imx_sc_ipc *sc_ipc;
+};
+
+static void imx8_get_windows(struct snd_sof_dev *sdev)
+{
+	struct sof_ipc_window_elem *elem;
+	u32 outbox_offset = 0;
+	u32 stream_offset = 0;
+	u32 inbox_offset = 0;
+	u32 outbox_size = 0;
+	u32 stream_size = 0;
+	u32 inbox_size = 0;
+	int i;
+
+	if (!sdev->info_window) {
+		dev_err(sdev->dev, "error: have no window info\n");
+		return;
+	}
+
+	for (i = 0; i < sdev->info_window->num_windows; i++) {
+		elem = &sdev->info_window->window[i];
+
+		switch (elem->type) {
+		case SOF_IPC_REGION_UPBOX:
+			inbox_offset = elem->offset + MBOX_OFFSET;
+			inbox_size = elem->size;
+			snd_sof_debugfs_io_item(sdev,
+						sdev->bar[SOF_FW_BLK_TYPE_SRAM]
+						+ inbox_offset,
+						elem->size, "inbox",
+						SOF_DEBUGFS_ACCESS_D0_ONLY);
+			break;
+		case SOF_IPC_REGION_DOWNBOX:
+			outbox_offset = elem->offset + MBOX_OFFSET;
+			outbox_size = elem->size;
+			snd_sof_debugfs_io_item(sdev,
+						sdev->bar[SOF_FW_BLK_TYPE_SRAM]
+						+ outbox_offset,
+						elem->size, "outbox",
+						SOF_DEBUGFS_ACCESS_D0_ONLY);
+			break;
+		case SOF_IPC_REGION_TRACE:
+			snd_sof_debugfs_io_item(sdev,
+						sdev->bar[SOF_FW_BLK_TYPE_SRAM]
+						+ elem->offset + MBOX_OFFSET,
+						elem->size, "etrace",
+						SOF_DEBUGFS_ACCESS_D0_ONLY);
+			break;
+		case SOF_IPC_REGION_DEBUG:
+			snd_sof_debugfs_io_item(sdev,
+						sdev->bar[SOF_FW_BLK_TYPE_SRAM]
+						+ elem->offset + MBOX_OFFSET,
+						elem->size, "debug",
+						SOF_DEBUGFS_ACCESS_D0_ONLY);
+			break;
+		case SOF_IPC_REGION_STREAM:
+			stream_offset = elem->offset + MBOX_OFFSET;
+			stream_size = elem->size;
+			snd_sof_debugfs_io_item(sdev,
+						sdev->bar[SOF_FW_BLK_TYPE_SRAM]
+						+ stream_offset,
+						elem->size, "stream",
+						SOF_DEBUGFS_ACCESS_D0_ONLY);
+			break;
+		case SOF_IPC_REGION_REGS:
+			snd_sof_debugfs_io_item(sdev,
+						sdev->bar[SOF_FW_BLK_TYPE_SRAM]
+						+ elem->offset + MBOX_OFFSET,
+						elem->size, "regs",
+						SOF_DEBUGFS_ACCESS_D0_ONLY);
+			break;
+		case SOF_IPC_REGION_EXCEPTION:
+			sdev->dsp_oops_offset = elem->offset + MBOX_OFFSET;
+			snd_sof_debugfs_io_item(sdev,
+						sdev->bar[SOF_FW_BLK_TYPE_SRAM]
+						+ elem->offset + MBOX_OFFSET,
+						elem->size, "exception",
+						SOF_DEBUGFS_ACCESS_D0_ONLY);
+			break;
+		default:
+			dev_err(sdev->dev, "error: get illegal window info\n");
+			return;
+		}
+	}
+
+	if (outbox_size == 0 || inbox_size == 0) {
+		dev_err(sdev->dev, "error: get illegal mailbox window\n");
+		return;
+	}
+
+	snd_sof_dsp_mailbox_init(sdev, inbox_offset, inbox_size,
+				 outbox_offset, outbox_size);
+	sdev->stream_box.offset = stream_offset;
+	sdev->stream_box.size = stream_size;
+
+	dev_dbg(sdev->dev, " mailbox upstream 0x%x - size 0x%x\n",
+		inbox_offset, inbox_size);
+	dev_dbg(sdev->dev, " mailbox downstream 0x%x - size 0x%x\n",
+		outbox_offset, outbox_size);
+	dev_dbg(sdev->dev, " stream region 0x%x - size 0x%x\n",
+		stream_offset, stream_size);
+}
+
+/*
+ * IPC Firmware ready.
+ */
+static int imx8_fw_ready(struct snd_sof_dev *sdev, u32 msg_id)
+{
+	struct sof_ipc_fw_ready *fw_ready = &sdev->fw_ready;
+	u32 offset;
+	int ret;
+
+	/* mailbox must be on 4k boundary */
+	offset = MBOX_OFFSET;
+
+	dev_dbg(sdev->dev, "ipc: DSP is ready 0x%8.8x offset 0x%x\n",
+		msg_id, offset);
+
+	 /* no need to re-check version/ABI for subsequent boots */
+	if (!sdev->first_boot)
+		return 0;
+
+	/* copy data from the DSP FW ready offset */
+	sof_block_read(sdev, sdev->mailbox_bar, offset, fw_ready,
+		       sizeof(*fw_ready));
+	snd_sof_dsp_mailbox_init(sdev, fw_ready->dspbox_offset,
+				 fw_ready->dspbox_size,
+				 fw_ready->hostbox_offset,
+				 fw_ready->hostbox_size);
+
+	/* make sure ABI version is compatible */
+	ret = snd_sof_ipc_valid(sdev);
+	if (ret < 0)
+		return ret;
+
+	/* now check for extended data */
+	snd_sof_fw_parse_ext_data(sdev, SOF_FW_BLK_TYPE_SRAM, MBOX_OFFSET +
+				  sizeof(struct sof_ipc_fw_ready));
+
+	imx8_get_windows(sdev);
+
+	return 0;
+}
+
+static void imx8_get_reply(struct snd_sof_dev *sdev)
+{
+	struct snd_sof_ipc_msg *msg = sdev->msg;
+	struct sof_ipc_reply reply;
+	unsigned long flags;
+	int ret = 0;
+
+	if (!msg) {
+		dev_warn(sdev->dev, "unexpected ipc interrupt\n");
+		return;
+	}
+
+	/* get reply */
+	sof_mailbox_read(sdev, sdev->host_box.offset, &reply, sizeof(reply));
+
+	spin_lock_irqsave(&sdev->ipc_lock, flags);
+
+	if (reply.error < 0) {
+		memcpy(msg->reply_data, &reply, sizeof(reply));
+		ret = reply.error;
+	} else {
+		/* reply has correct size? */
+		if (reply.hdr.size != msg->reply_size) {
+			dev_err(sdev->dev, "error: reply expected %zu got %u bytes\n",
+				msg->reply_size, reply.hdr.size);
+			ret = -EINVAL;
+		}
+
+		/* read the message */
+		if (msg->reply_size > 0)
+			sof_mailbox_read(sdev, sdev->host_box.offset,
+					 msg->reply_data, msg->reply_size);
+	}
+
+	msg->reply_error = ret;
+
+	spin_unlock_irqrestore(&sdev->ipc_lock, flags);
+}
+
+void imx_dsp_handle_reply(struct imx_dsp_ipc *ipc)
+{
+	struct imx8_priv *priv = imx_dsp_get_data(ipc);
+
+	imx8_get_reply(priv->sdev);
+	snd_sof_ipc_reply(priv->sdev, 0);
+}
+
+void imx_dsp_handle_request(struct imx_dsp_ipc *ipc)
+{
+	struct imx8_priv *priv = imx_dsp_get_data(ipc);
+
+	snd_sof_ipc_msgs_rx(priv->sdev);
+}
+
+struct imx_dsp_ops dsp_ops = {
+	.handle_reply		= imx_dsp_handle_reply,
+	.handle_request		= imx_dsp_handle_request,
+};
+
+static int imx8_send_msg(struct snd_sof_dev *sdev, struct snd_sof_ipc_msg *msg)
+{
+	struct imx8_priv *priv = (struct imx8_priv *)sdev->private;
+
+	sof_mailbox_write(sdev, sdev->host_box.offset, msg->msg_data,
+			  msg->msg_size);
+	imx_dsp_ring_doorbell(priv->dsp_ipc, 0);
+
+	return 0;
+}
+
+/*
+ * DSP control.
+ */
+static int imx8_run(struct snd_sof_dev *sdev)
+{
+	int ret;
+	struct imx8_priv *dsp_priv = (struct imx8_priv *)sdev->private;
+
+	ret = imx_sc_misc_set_control(dsp_priv->sc_ipc, IMX_SC_R_DSP,
+				      IMX_SC_C_OFS_SEL, 1);
+	if (ret < 0) {
+		dev_err(sdev->dev, "Error system address offset source select\n");
+		return ret;
+	}
+
+	ret = imx_sc_misc_set_control(dsp_priv->sc_ipc, IMX_SC_R_DSP,
+				      IMX_SC_C_OFS_AUDIO, 0x80);
+	if (ret < 0) {
+		dev_err(sdev->dev, "Error system address offset of AUDIO\n");
+		return ret;
+	}
+
+	ret = imx_sc_misc_set_control(dsp_priv->sc_ipc, IMX_SC_R_DSP,
+				      IMX_SC_C_OFS_PERIPH, 0x5A);
+	if (ret < 0) {
+		dev_err(sdev->dev, "Error system address offset of PERIPH %d\n",
+			ret);
+		return ret;
+	}
+
+	ret = imx_sc_misc_set_control(dsp_priv->sc_ipc, IMX_SC_R_DSP,
+				      IMX_SC_C_OFS_IRQ, 0x51);
+	if (ret < 0) {
+		dev_err(sdev->dev, "Error system address offset of IRQ\n");
+		return ret;
+	}
+
+	imx_sc_pm_cpu_start(dsp_priv->sc_ipc, IMX_SC_R_DSP, true,
+			    RESET_VECTOR_VADDR);
+
+	return 0;
+}
+
+static int imx8_probe(struct snd_sof_dev *sdev)
+{
+	struct imx8_priv *priv;
+	int i;
+	struct platform_device *pdev =
+		container_of(sdev->dev, struct platform_device, dev);
+	struct platform_device *ipc_dev;
+	struct resource *mmio;
+	int num_domains = 0;
+	u32 base, size;
+	int ret = 0;
+	struct device_node *np = pdev->dev.of_node;
+	struct device_node *res_node;
+	struct resource res;
+
+	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	sdev->private = priv;
+	priv->dev = sdev->dev;
+	priv->sdev = sdev;
+
+	ret = imx_scu_get_handle(&priv->sc_ipc);
+	if (ret) {
+		dev_err(sdev->dev, "Cannot obtain SCU handle (err = %d)\n",
+			ret);
+		return ret;
+	}
+
+	ipc_dev = platform_device_register_data(sdev->dev, "imx-dsp",
+						PLATFORM_DEVID_NONE,
+						pdev, sizeof(*pdev));
+	if (IS_ERR(ipc_dev)) {
+		dev_err(sdev->dev, "Failed to register platform device\n");
+		return PTR_ERR(ipc_dev);
+	}
+
+	priv->dsp_ipc = dev_get_drvdata(&ipc_dev->dev);
+	if (!priv->dsp_ipc)
+		return -EPROBE_DEFER;
+
+	imx_dsp_set_data(priv->dsp_ipc, priv);
+	priv->dsp_ipc->ops = &dsp_ops;
+
+	num_domains = of_count_phandle_with_args(np, "power-domains",
+						 "#power-domain-cells");
+	for (i = 0; i < num_domains; i++) {
+		struct device *pd_dev;
+		struct device_link *link;
+
+		pd_dev = dev_pm_domain_attach_by_id(&pdev->dev, i);
+		if (IS_ERR(pd_dev))
+			return PTR_ERR(pd_dev);
+
+		link = device_link_add(&pdev->dev, pd_dev,
+				       DL_FLAG_STATELESS |
+				       DL_FLAG_PM_RUNTIME |
+				       DL_FLAG_RPM_ACTIVE);
+		if (IS_ERR(link))
+			return PTR_ERR(link);
+	}
+
+	/* DSP base */
+	mmio = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (mmio) {
+		base = mmio->start;
+		size = resource_size(mmio);
+	} else {
+		dev_err(sdev->dev, "error: failed to get DSP base at idx 0\n");
+		return -EINVAL;
+	}
+
+	sdev->bar[SOF_FW_BLK_TYPE_IRAM] = devm_ioremap(sdev->dev, base, size);
+	if (!sdev->bar[SOF_FW_BLK_TYPE_IRAM]) {
+		dev_err(sdev->dev, "failed to ioremap base 0x%x size 0x%x\n",
+			base, size);
+		return -ENODEV;
+	}
+	sdev->mmio_bar = SOF_FW_BLK_TYPE_IRAM;
+
+	res_node = of_parse_phandle(np, "memory-region", 0);
+	if (!res_node) {
+		dev_err(&pdev->dev, "failed to get memory region node\n");
+		return -ENODEV;
+	}
+	if (of_address_to_resource(res_node, 0, &res)) {
+		dev_err(&pdev->dev, "failed to get reserved region address\n");
+		return -EINVAL;
+	}
+
+	sdev->bar[SOF_FW_BLK_TYPE_SRAM] = devm_ioremap_wc(sdev->dev, res.start,
+							  res.end - res.start +
+							  1);
+	if (!sdev->bar[SOF_FW_BLK_TYPE_SRAM]) {
+		dev_err(sdev->dev, "failed to ioremap mem 0x%x size 0x%x\n",
+			base, size);
+		return -ENODEV;
+	}
+	sdev->mailbox_bar = SOF_FW_BLK_TYPE_SRAM;
+
+	return ret;
+}
+
+/* on i.MX8 there is 1 to 1 match between type and BAR idx */
+int imx8_get_bar_index(struct snd_sof_dev *sdev, u32 type)
+{
+	return type;
+}
+
+void imx8_ipc_msg_data(struct snd_sof_dev *sdev,
+		       struct snd_pcm_substream *substream,
+		       void *p, size_t sz)
+{
+	sof_mailbox_read(sdev, sdev->dsp_box.offset, p, sz);
+}
+
+int imx8_ipc_pcm_params(struct snd_sof_dev *sdev,
+			struct snd_pcm_substream *substream,
+			const struct sof_ipc_pcm_params_reply *reply)
+{
+	return 0;
+}
+
+static struct snd_soc_dai_driver imx8_dai[] = {
+{
+	.name = "esai-port",
+},
+};
+
+/* i.MX8  ops */
+struct snd_sof_dsp_ops sof_imx8_ops = {
+	/* device init */
+	.probe		= imx8_probe,
+
+	/* DSP core boot */
+	.run		= imx8_run,
+
+	/* Block IO */
+	.block_read	= sof_block_read,
+	.block_write	= sof_block_write,
+
+	/* ipc */
+	.send_msg	= imx8_send_msg,
+	.fw_ready	= imx8_fw_ready,
+
+	.ipc_msg_data = imx8_ipc_msg_data,
+	.ipc_pcm_params = imx8_ipc_pcm_params,
+
+	/* module loading */
+	.load_module	= snd_sof_parse_module_memcpy,
+	.get_bar_index	= imx8_get_bar_index,
+	/* firmware loading */
+	.load_firmware	= snd_sof_load_firmware_memcpy,
+
+	/* DAI drivers */
+	.drv = imx8_dai,
+	.num_drv = 1, /* we have only 1 ESAI interface on i.MX8 */
+};
+EXPORT_SYMBOL(sof_imx8_ops);
+
+MODULE_LICENSE("Dual BSD/GPL");
-- 
2.17.1


  reply	other threads:[~2019-07-23  8:41 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-07-23  8:40 [PATCH v2 0/5] Add DSP node for i.MX8QXP board to be used by DSP SOF driver Daniel Baluta
2019-07-23  8:41 ` Daniel Baluta [this message]
2019-07-23 15:01   ` [Sound-open-firmware] [PATCH v2 1/5] ASoC: SOF: imx: Add i.MX8 HW support Pierre-Louis Bossart
2019-07-24  6:54     ` Daniel Baluta
2019-07-24  8:32       ` Lucas Stach
2019-07-24  8:58         ` Daniel Baluta
2019-07-23  8:41 ` [PATCH v2 2/5] ASoC: SOF: topology: Add dummy support for i.MX8 DAIs Daniel Baluta
2019-07-23  8:41 ` [PATCH v2 3/5] ASoC: SOF: Add DT DSP device support Daniel Baluta
2019-07-23 15:11   ` [Sound-open-firmware] " Pierre-Louis Bossart
2019-07-24  7:04     ` Daniel Baluta
2019-08-07 14:39       ` Daniel Baluta
2019-08-07 15:22         ` Pierre-Louis Bossart
2019-08-07 15:28           ` Daniel Baluta
2019-08-08  6:27             ` Daniel Baluta
2019-08-07 15:29     ` Daniel Baluta
2019-08-07 16:01       ` Pierre-Louis Bossart
2019-07-23  8:41 ` [PATCH v2 4/5] arm64: dts: imx8qxp: Add DSP DT node Daniel Baluta
2019-07-23  8:41 ` [PATCH v2 5/5] dt-bindings: dsp: fsl: Add DSP core binding support Daniel Baluta
2019-07-23 22:32   ` Rob Herring

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190723084104.12639-2-daniel.baluta@nxp.com \
    --to=daniel.baluta@nxp.com \
    --cc=aisheng.dong@nxp.com \
    --cc=anson.huang@nxp.com \
    --cc=devicetree@vger.kernel.org \
    --cc=festevam@gmail.com \
    --cc=kernel@pengutronix.de \
    --cc=leonard.crestez@nxp.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-imx@nxp.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=m.felsch@pengutronix.de \
    --cc=mark.rutland@arm.com \
    --cc=paul.olaru@nxp.com \
    --cc=peng.fan@nxp.com \
    --cc=robh+dt@kernel.org \
    --cc=shawnguo@kernel.org \
    --cc=shengjiu.wang@nxp.com \
    --cc=sound-open-firmware@alsa-project.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).