From: Jonathan Chocron <jonnyc@amazon.com>
To: <lorenzo.pieralisi@arm.com>, <bhelgaas@google.com>,
<jingoohan1@gmail.com>, <gustavo.pimentel@synopsys.com>,
<robh+dt@kernel.org>, <mark.rutland@arm.com>
Cc: <dwmw@amazon.co.uk>, <benh@kernel.crashing.org>,
<alisaidi@amazon.com>, <ronenk@amazon.com>, <barakw@amazon.com>,
<talel@amazon.com>, <hanochu@amazon.com>, <hhhawa@amazon.com>,
<linux-pci@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<devicetree@vger.kernel.org>, <jonnyc@amazon.com>
Subject: [PATCH v3 4/8] PCI: Add quirk to disable MSI-X support for Amazon's Annapurna Labs Root Port
Date: Tue, 23 Jul 2019 12:25:29 +0300 [thread overview]
Message-ID: <20190723092529.11310-5-jonnyc@amazon.com> (raw)
In-Reply-To: <20190723092529.11310-1-jonnyc@amazon.com>
The Root Port (identified by [1c36:0032]) doesn't support MSI-X. On some
platforms it is configured to not advertise the capability at all, while
on others it (mistakenly) does. This causes a panic during
initialization by the pcieport driver, since it tries to configure the
MSI-X capability. Specifically, when trying to access the MSI-X table
a "non-existing addr" exception occurs.
Example stacktrace snippet:
[ 1.632363] SError Interrupt on CPU2, code 0xbf000000 -- SError
[ 1.632364] CPU: 2 PID: 1 Comm: swapper/0 Not tainted 5.2.0-rc1-Jonny-14847-ge76f1d4a1828-dirty #33
[ 1.632365] Hardware name: Annapurna Labs Alpine V3 EVP (DT)
[ 1.632365] pstate: 80000005 (Nzcv daif -PAN -UAO)
[ 1.632366] pc : __pci_enable_msix_range+0x4e4/0x608
[ 1.632367] lr : __pci_enable_msix_range+0x498/0x608
[ 1.632367] sp : ffffff80117db700
[ 1.632368] x29: ffffff80117db700 x28: 0000000000000001
[ 1.632370] x27: 0000000000000001 x26: 0000000000000000
[ 1.632372] x25: ffffffd3e9d8c0b0 x24: 0000000000000000
[ 1.632373] x23: 0000000000000000 x22: 0000000000000000
[ 1.632375] x21: 0000000000000001 x20: 0000000000000000
[ 1.632376] x19: ffffffd3e9d8c000 x18: ffffffffffffffff
[ 1.632378] x17: 0000000000000000 x16: 0000000000000000
[ 1.632379] x15: ffffff80116496c8 x14: ffffffd3e9844503
[ 1.632380] x13: ffffffd3e9844502 x12: 0000000000000038
[ 1.632382] x11: ffffffffffffff00 x10: 0000000000000040
[ 1.632384] x9 : ffffff801165e270 x8 : ffffff801165e268
[ 1.632385] x7 : 0000000000000002 x6 : 00000000000000b2
[ 1.632387] x5 : ffffffd3e9d8c2c0 x4 : 0000000000000000
[ 1.632388] x3 : 0000000000000000 x2 : 0000000000000000
[ 1.632390] x1 : 0000000000000000 x0 : ffffffd3e9844680
[ 1.632392] Kernel panic - not syncing: Asynchronous SError Interrupt
[ 1.632393] CPU: 2 PID: 1 Comm: swapper/0 Not tainted 5.2.0-rc1-Jonny-14847-ge76f1d4a1828-dirty #33
[ 1.632394] Hardware name: Annapurna Labs Alpine V3 EVP (DT)
[ 1.632394] Call trace:
[ 1.632395] dump_backtrace+0x0/0x140
[ 1.632395] show_stack+0x14/0x20
[ 1.632396] dump_stack+0xa8/0xcc
[ 1.632396] panic+0x140/0x334
[ 1.632397] nmi_panic+0x6c/0x70
[ 1.632398] arm64_serror_panic+0x74/0x88
[ 1.632398] __pte_error+0x0/0x28
[ 1.632399] el1_error+0x84/0xf8
[ 1.632400] __pci_enable_msix_range+0x4e4/0x608
[ 1.632400] pci_alloc_irq_vectors_affinity+0xdc/0x150
[ 1.632401] pcie_port_device_register+0x2b8/0x4e0
[ 1.632402] pcie_portdrv_probe+0x34/0xf0
Signed-off-by: Jonathan Chocron <jonnyc@amazon.com>
Reviewed-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
---
drivers/pci/quirks.c | 15 +++++++++++++++
1 file changed, 15 insertions(+)
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index 23672680dba7..11f843aa96b3 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -2925,6 +2925,21 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, 0x10a1,
quirk_msi_intx_disable_qca_bug);
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, 0xe091,
quirk_msi_intx_disable_qca_bug);
+
+/*
+ * Amazon's Annapurna Labs 1c36:0031 Root Ports don't support MSI-X, so it
+ * should be disabled on platforms where the device (mistakenly) advertises it.
+ *
+ * The 0031 device id is reused for other non Root Port device types,
+ * therefore the quirk is registered for the PCI_CLASS_BRIDGE_PCI class.
+ */
+static void quirk_al_msi_disable(struct pci_dev *dev)
+{
+ dev->no_msi = 1;
+ pci_warn(dev, "Disabling MSI-X\n");
+}
+DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_VENDOR_ID_AMAZON_ANNAPURNA_LABS, 0x0031,
+ PCI_CLASS_BRIDGE_PCI, 8, quirk_al_msi_disable);
#endif /* CONFIG_PCI_MSI */
/*
--
2.17.1
next prev parent reply other threads:[~2019-07-23 9:26 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-07-23 9:25 [PATCH v3 0/8] Amazon's Annapurna Labs DT-based PCIe host controller driver Jonathan Chocron
2019-07-23 9:25 ` [PATCH v3 1/8] PCI: Add Amazon's Annapurna Labs vendor ID Jonathan Chocron
2019-08-19 17:51 ` Andrew Murray
2019-07-23 9:25 ` [PATCH v3 2/8] PCI: Add ACS quirk for Amazon Annapurna Labs root ports Jonathan Chocron
2019-07-23 9:25 ` [PATCH v3 3/8] PCI/VPD: Add VPD release quirk for Amazon's Annapurna Labs Root Port Jonathan Chocron
2019-07-23 9:25 ` Jonathan Chocron [this message]
2019-08-19 18:23 ` [PATCH v3 4/8] PCI: Add quirk to disable MSI-X support " Andrew Murray
2019-08-20 14:52 ` Chocron, Jonathan
2019-08-20 15:25 ` Andrew Murray
2019-08-20 17:06 ` Chocron, Jonathan
2019-08-20 19:54 ` Andrew Murray
2019-08-21 10:30 ` Chocron, Jonathan
2019-07-23 9:27 ` [PATCH v3 5/8] dt-bindings: PCI: Add Amazon's Annapurna Labs PCIe host bridge binding Jonathan Chocron
2019-08-13 15:30 ` Rob Herring
2019-08-13 16:48 ` Chocron, Jonathan
2019-08-13 20:46 ` Rob Herring
2019-08-19 16:15 ` Chocron, Jonathan
2019-07-23 9:27 ` [PATCH v3 6/8] PCI: al: Add support for DW based driver type Jonathan Chocron
2019-07-23 9:40 ` Gustavo Pimentel
2019-08-12 17:03 ` Lorenzo Pieralisi
2019-08-14 11:39 ` Chocron, Jonathan
2019-07-23 9:27 ` [PATCH v3 7/8] PCI: dw: Add validation that PCIe core is set to correct mode Jonathan Chocron
2019-07-23 9:27 ` [PATCH v3 8/8] PCI: dw: Add support for PCI_PROBE_ONLY/PCI_REASSIGN_ALL_BUS flags Jonathan Chocron
2019-08-07 16:36 ` Lorenzo Pieralisi
2019-08-08 9:30 ` Chocron, Jonathan
2019-08-08 10:58 ` Lorenzo Pieralisi
2019-08-12 18:05 ` Chocron, Jonathan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190723092529.11310-5-jonnyc@amazon.com \
--to=jonnyc@amazon.com \
--cc=alisaidi@amazon.com \
--cc=barakw@amazon.com \
--cc=benh@kernel.crashing.org \
--cc=bhelgaas@google.com \
--cc=devicetree@vger.kernel.org \
--cc=dwmw@amazon.co.uk \
--cc=gustavo.pimentel@synopsys.com \
--cc=hanochu@amazon.com \
--cc=hhhawa@amazon.com \
--cc=jingoohan1@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=lorenzo.pieralisi@arm.com \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
--cc=ronenk@amazon.com \
--cc=talel@amazon.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).