From: Linus Walleij <linus.walleij@linaro.org>
To: MyungJoo Ham <myungjoo.ham@samsung.com>,
Chanwoo Choi <cw00.choi@samsung.com>
Cc: linux-kernel@vger.kernel.org, linux-gpio@vger.kernel.org,
Mike Lockwood <lockwood@google.com>,
Linus Walleij <linus.walleij@linaro.org>,
devicetree@vger.kernel.org
Subject: [PATCH] extcon: fsa9480: Support the FSA880 variant
Date: Tue, 23 Jul 2019 19:43:01 +0200 [thread overview]
Message-ID: <20190723174301.31278-1-linus.walleij@linaro.org> (raw)
The older compatible variant of this chip is called FSA880
and works the same way, if we need some quirks in the future,
it is good to let it have its own compatible string.
Cc: devicetree@vger.kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
Documentation/devicetree/bindings/extcon/extcon-fsa9480.txt | 4 +++-
drivers/extcon/extcon-fsa9480.c | 1 +
2 files changed, 4 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/extcon/extcon-fsa9480.txt b/Documentation/devicetree/bindings/extcon/extcon-fsa9480.txt
index d592c21245f2..624bd76f468e 100644
--- a/Documentation/devicetree/bindings/extcon/extcon-fsa9480.txt
+++ b/Documentation/devicetree/bindings/extcon/extcon-fsa9480.txt
@@ -5,7 +5,9 @@ controlled using I2C and enables USB data, stereo and mono audio, video,
microphone, and UART data to use a common connector port.
Required properties:
- - compatible : Must be "fcs,fsa9480"
+ - compatible : Must be one of
+ "fcs,fsa9480"
+ "fcs,fsa880"
- reg : Specifies i2c slave address. Must be 0x25.
- interrupts : Should contain one entry specifying interrupt signal of
interrupt parent to which interrupt pin of the chip is connected.
diff --git a/drivers/extcon/extcon-fsa9480.c b/drivers/extcon/extcon-fsa9480.c
index 350fb34abfa0..8405512f5199 100644
--- a/drivers/extcon/extcon-fsa9480.c
+++ b/drivers/extcon/extcon-fsa9480.c
@@ -363,6 +363,7 @@ MODULE_DEVICE_TABLE(i2c, fsa9480_id);
static const struct of_device_id fsa9480_of_match[] = {
{ .compatible = "fcs,fsa9480", },
+ { .compatible = "fcs,fsa880", },
{ },
};
MODULE_DEVICE_TABLE(of, fsa9480_of_match);
--
2.21.0
next reply other threads:[~2019-07-23 17:43 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <CGME20190723174344epcas3p4dc935720d75f93a5ca0181662bc8036f@epcas3p4.samsung.com>
2019-07-23 17:43 ` Linus Walleij [this message]
2019-07-24 10:12 ` [PATCH] extcon: fsa9480: Support the FSA880 variant Chanwoo Choi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190723174301.31278-1-linus.walleij@linaro.org \
--to=linus.walleij@linaro.org \
--cc=cw00.choi@samsung.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=lockwood@google.com \
--cc=myungjoo.ham@samsung.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).