From: Mao Wenan <maowenan@huawei.com>
To: <davem@davemloft.net>, <gregkh@linuxfoundation.org>,
<netdev@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Cc: Mao Wenan <maowenan@huawei.com>
Subject: [PATCH 4.4 stable net] net: tcp: Fix use-after-free in tcp_write_xmit
Date: Wed, 24 Jul 2019 17:17:15 +0800 [thread overview]
Message-ID: <20190724091715.137033-1-maowenan@huawei.com> (raw)
There is one report about tcp_write_xmit use-after-free with version 4.4.136:
BUG: KASAN: use-after-free in tcp_skb_pcount include/net/tcp.h:796 [inline]
BUG: KASAN: use-after-free in tcp_init_tso_segs net/ipv4/tcp_output.c:1619 [inline]
BUG: KASAN: use-after-free in tcp_write_xmit+0x3fc2/0x4cb0 net/ipv4/tcp_output.c:2056
Read of size 2 at addr ffff8801d6fc87b0 by task syz-executor408/4195
CPU: 0 PID: 4195 Comm: syz-executor408 Not tainted 4.4.136-gfb7e319 #59
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
0000000000000000 7d8f38ecc03be946 ffff8801d73b7710 ffffffff81e0edad
ffffea00075bf200 ffff8801d6fc87b0 0000000000000000 ffff8801d6fc87b0
dffffc0000000000 ffff8801d73b7748 ffffffff815159b6 ffff8801d6fc87b0
Call Trace:
[<ffffffff81e0edad>] __dump_stack lib/dump_stack.c:15 [inline]
[<ffffffff81e0edad>] dump_stack+0xc1/0x124 lib/dump_stack.c:51
[<ffffffff815159b6>] print_address_description+0x6c/0x216 mm/kasan/report.c:252
[<ffffffff81515cd5>] kasan_report_error mm/kasan/report.c:351 [inline]
[<ffffffff81515cd5>] kasan_report.cold.7+0x175/0x2f7 mm/kasan/report.c:408
[<ffffffff814f9784>] __asan_report_load2_noabort+0x14/0x20 mm/kasan/report.c:427
[<ffffffff83286582>] tcp_skb_pcount include/net/tcp.h:796 [inline]
[<ffffffff83286582>] tcp_init_tso_segs net/ipv4/tcp_output.c:1619 [inline]
[<ffffffff83286582>] tcp_write_xmit+0x3fc2/0x4cb0 net/ipv4/tcp_output.c:2056
[<ffffffff83287a40>] __tcp_push_pending_frames+0xa0/0x290 net/ipv4/tcp_output.c:2307
[<ffffffff8328e966>] tcp_send_fin+0x176/0xab0 net/ipv4/tcp_output.c:2883
[<ffffffff8324c0d0>] tcp_close+0xca0/0xf70 net/ipv4/tcp.c:2112
[<ffffffff832f8d0f>] inet_release+0xff/0x1d0 net/ipv4/af_inet.c:435
[<ffffffff82f1a156>] sock_release+0x96/0x1c0 net/socket.c:586
[<ffffffff82f1a296>] sock_close+0x16/0x20 net/socket.c:1037
[<ffffffff81522da5>] __fput+0x235/0x6f0 fs/file_table.c:208
[<ffffffff815232e5>] ____fput+0x15/0x20 fs/file_table.c:244
[<ffffffff8118bd7f>] task_work_run+0x10f/0x190 kernel/task_work.c:115
[<ffffffff81135285>] exit_task_work include/linux/task_work.h:21 [inline]
[<ffffffff81135285>] do_exit+0x9e5/0x26b0 kernel/exit.c:759
[<ffffffff8113b1d1>] do_group_exit+0x111/0x330 kernel/exit.c:889
[<ffffffff8115e5cc>] get_signal+0x4ec/0x14b0 kernel/signal.c:2321
[<ffffffff8100e02b>] do_signal+0x8b/0x1d30 arch/x86/kernel/signal.c:712
[<ffffffff8100360a>] exit_to_usermode_loop+0x11a/0x160 arch/x86/entry/common.c:248
[<ffffffff81006535>] prepare_exit_to_usermode arch/x86/entry/common.c:283 [inline]
[<ffffffff81006535>] syscall_return_slowpath+0x1b5/0x1f0 arch/x86/entry/common.c:348
[<ffffffff838c29b5>] int_ret_from_sys_call+0x25/0xa3
Allocated by task 4194:
[<ffffffff810341d6>] save_stack_trace+0x26/0x50 arch/x86/kernel/stacktrace.c:63
[<ffffffff814f8873>] save_stack+0x43/0xd0 mm/kasan/kasan.c:512
[<ffffffff814f8b57>] set_track mm/kasan/kasan.c:524 [inline]
[<ffffffff814f8b57>] kasan_kmalloc+0xc7/0xe0 mm/kasan/kasan.c:616
[<ffffffff814f9122>] kasan_slab_alloc+0x12/0x20 mm/kasan/kasan.c:554
[<ffffffff814f4c1e>] slab_post_alloc_hook mm/slub.c:1349 [inline]
[<ffffffff814f4c1e>] slab_alloc_node mm/slub.c:2615 [inline]
[<ffffffff814f4c1e>] slab_alloc mm/slub.c:2623 [inline]
[<ffffffff814f4c1e>] kmem_cache_alloc+0xbe/0x2a0 mm/slub.c:2628
[<ffffffff82f380a6>] kmem_cache_alloc_node include/linux/slab.h:350 [inline]
[<ffffffff82f380a6>] __alloc_skb+0xe6/0x600 net/core/skbuff.c:218
[<ffffffff832466c3>] alloc_skb_fclone include/linux/skbuff.h:856 [inline]
[<ffffffff832466c3>] sk_stream_alloc_skb+0xa3/0x5d0 net/ipv4/tcp.c:833
[<ffffffff83249164>] tcp_sendmsg+0xd34/0x2b00 net/ipv4/tcp.c:1178
[<ffffffff83300ef3>] inet_sendmsg+0x203/0x4d0 net/ipv4/af_inet.c:755
[<ffffffff82f1e1fc>] sock_sendmsg_nosec net/socket.c:625 [inline]
[<ffffffff82f1e1fc>] sock_sendmsg+0xcc/0x110 net/socket.c:635
[<ffffffff82f1eedc>] SYSC_sendto+0x21c/0x370 net/socket.c:1665
[<ffffffff82f21560>] SyS_sendto+0x40/0x50 net/socket.c:1633
[<ffffffff838c2825>] entry_SYSCALL_64_fastpath+0x22/0x9e
Freed by task 4194:
[<ffffffff810341d6>] save_stack_trace+0x26/0x50 arch/x86/kernel/stacktrace.c:63
[<ffffffff814f8873>] save_stack+0x43/0xd0 mm/kasan/kasan.c:512
[<ffffffff814f91a2>] set_track mm/kasan/kasan.c:524 [inline]
[<ffffffff814f91a2>] kasan_slab_free+0x72/0xc0 mm/kasan/kasan.c:589
[<ffffffff814f632e>] slab_free_hook mm/slub.c:1383 [inline]
[<ffffffff814f632e>] slab_free_freelist_hook mm/slub.c:1405 [inline]
[<ffffffff814f632e>] slab_free mm/slub.c:2859 [inline]
[<ffffffff814f632e>] kmem_cache_free+0xbe/0x340 mm/slub.c:2881
[<ffffffff82f3527f>] kfree_skbmem+0xcf/0x100 net/core/skbuff.c:635
[<ffffffff82f372fd>] __kfree_skb+0x1d/0x20 net/core/skbuff.c:676
[<ffffffff83288834>] sk_wmem_free_skb include/net/sock.h:1447 [inline]
[<ffffffff83288834>] tcp_write_queue_purge include/net/tcp.h:1460 [inline]
[<ffffffff83288834>] tcp_connect_init net/ipv4/tcp_output.c:3122 [inline]
[<ffffffff83288834>] tcp_connect+0xb24/0x30c0 net/ipv4/tcp_output.c:3261
[<ffffffff8329b991>] tcp_v4_connect+0xf31/0x1890 net/ipv4/tcp_ipv4.c:246
[<ffffffff832f9ca9>] __inet_stream_connect+0x2a9/0xc30 net/ipv4/af_inet.c:615
[<ffffffff832fa685>] inet_stream_connect+0x55/0xa0 net/ipv4/af_inet.c:676
[<ffffffff82f1eb78>] SYSC_connect+0x1b8/0x300 net/socket.c:1557
[<ffffffff82f214b4>] SyS_connect+0x24/0x30 net/socket.c:1538
[<ffffffff838c2825>] entry_SYSCALL_64_fastpath+0x22/0x9e
Syzkaller reproducer():
r0 = socket$packet(0x11, 0x3, 0x300)
r1 = socket$inet_tcp(0x2, 0x1, 0x0)
bind$inet(r1, &(0x7f0000000300)={0x2, 0x4e21, @multicast1}, 0x10)
connect$inet(r1, &(0x7f0000000140)={0x2, 0x1000004e21, @loopback}, 0x10)
recvmmsg(r1, &(0x7f0000001e40)=[{{0x0, 0x0, &(0x7f0000000100)=[{&(0x7f00000005c0)=""/88, 0x58}], 0x1}}], 0x1, 0x40000000, 0x0)
sendto$inet(r1, &(0x7f0000000000)="e2f7ad5b661c761edf", 0x9, 0x8080, 0x0, 0x0)
r2 = fcntl$dupfd(r1, 0x0, r0)
connect$unix(r2, &(0x7f00000001c0)=@file={0x0, './file0\x00'}, 0x6e)
C repro link: https://syzkaller.appspot.com/text?tag=ReproC&x=14db474f800000
This is because when tcp_connect_init call tcp_write_queue_purge, it will
kfree all the skb in the write_queue, but the sk->sk_send_head forget to set NULL,
then tcp_write_xmit try to send skb, which has freed in tcp_write_queue_purge, UAF happens.
Signed-off-by: Mao Wenan <maowenan@huawei.com>
---
include/net/tcp.h | 1 +
1 file changed, 1 insertion(+)
diff --git a/include/net/tcp.h b/include/net/tcp.h
index bf8a0dae977a..8f8aace28cf8 100644
--- a/include/net/tcp.h
+++ b/include/net/tcp.h
@@ -1457,6 +1457,7 @@ static inline void tcp_write_queue_purge(struct sock *sk)
while ((skb = __skb_dequeue(&sk->sk_write_queue)) != NULL)
sk_wmem_free_skb(sk, skb);
+ sk->sk_send_head = NULL;
sk_mem_reclaim(sk);
tcp_clear_all_retrans_hints(tcp_sk(sk));
inet_csk(sk)->icsk_backoff = 0;
--
2.20.1
next reply other threads:[~2019-07-24 9:12 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-07-24 9:17 Mao Wenan [this message]
2019-07-24 9:15 ` [PATCH 4.4 stable net] net: tcp: Fix use-after-free in tcp_write_xmit maowenan
2019-07-24 9:45 ` Eric Dumazet
2019-07-24 10:46 ` maowenan
2019-07-24 14:07 ` Eric Dumazet
2019-07-25 4:29 ` maowenan
2019-07-25 6:19 ` Eric Dumazet
2019-07-26 9:10 ` maowenan
2019-07-24 10:01 ` Eric Dumazet
2019-07-24 10:13 ` Eric Dumazet
2019-07-24 10:38 ` maowenan
2019-07-24 12:29 ` maowenan
2019-07-25 2:06 ` maowenan
2019-07-24 10:36 ` maowenan
2019-07-24 10:44 ` Eric Dumazet
2019-07-24 11:05 ` Greg KH
2019-07-24 12:13 ` maowenan
2019-07-27 10:44 ` maowenan
2019-07-27 11:22 ` maowenan
2019-07-27 11:40 ` Greg KH
2019-07-29 1:26 ` maowenan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190724091715.137033-1-maowenan@huawei.com \
--to=maowenan@huawei.com \
--cc=davem@davemloft.net \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).