linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: lantianyu1986@gmail.com
To: kys@microsoft.com, haiyangz@microsoft.com,
	sthemmin@microsoft.com, sashal@kernel.org, tglx@linutronix.de,
	mingo@redhat.com, bp@alien8.de, hpa@zytor.com, x86@kernel.org,
	daniel.lezcano@linaro.org, arnd@arndb.de,
	michael.h.kelley@microsoft.com, ashal@kernel.org
Cc: Tianyu Lan <Tianyu.Lan@microsoft.com>,
	linux-hyperv@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-arch@vger.kernel.org
Subject: [PATCH 2/2] clocksource/Hyper-V:  Add Hyper-V specific sched clock function
Date: Mon, 29 Jul 2019 15:52:43 +0800	[thread overview]
Message-ID: <20190729075243.22745-3-Tianyu.Lan@microsoft.com> (raw)
In-Reply-To: <20190729075243.22745-1-Tianyu.Lan@microsoft.com>

From: Tianyu Lan <Tianyu.Lan@microsoft.com>

Hyper-V guests use the default native_sched_clock() in pv_ops.time.sched_clock
on x86.  But native_sched_clock() directly uses the raw TSC value, which
can be discontinuous in a Hyper-V VM. Add the generic hv_setup_sched_clock()
to set the sched clock function appropriately. On x86, this sets pv_ops.time.
sched_clock to read the Hyper-V reference TSC value that is scaled and adjusted
to be continuous.

Also move the Hyper-V reference TSC initialization much earlier in the boot
process so no discontinuity is observed when pv_ops.time.sched_clock
calculates its offset.

Signed-off-by: Tianyu Lan <Tianyu.Lan@microsoft.com>
---
 arch/x86/hyperv/hv_init.c          |  2 --
 arch/x86/kernel/cpu/mshyperv.c     |  8 ++++++++
 drivers/clocksource/hyperv_timer.c | 22 ++++++++++++----------
 include/asm-generic/mshyperv.h     |  1 +
 4 files changed, 21 insertions(+), 12 deletions(-)

diff --git a/arch/x86/hyperv/hv_init.c b/arch/x86/hyperv/hv_init.c
index 0d258688c8cf..866dfb3dca48 100644
--- a/arch/x86/hyperv/hv_init.c
+++ b/arch/x86/hyperv/hv_init.c
@@ -301,8 +301,6 @@ void __init hyperv_init(void)
 
 	x86_init.pci.arch_init = hv_pci_init;
 
-	/* Register Hyper-V specific clocksource */
-	hv_init_clocksource();
 	return;
 
 remove_cpuhp_state:
diff --git a/arch/x86/kernel/cpu/mshyperv.c b/arch/x86/kernel/cpu/mshyperv.c
index 062f77279ce3..53afd33990eb 100644
--- a/arch/x86/kernel/cpu/mshyperv.c
+++ b/arch/x86/kernel/cpu/mshyperv.c
@@ -29,6 +29,7 @@
 #include <asm/timer.h>
 #include <asm/reboot.h>
 #include <asm/nmi.h>
+#include <clocksource/hyperv_timer.h>
 
 struct ms_hyperv_info ms_hyperv;
 EXPORT_SYMBOL_GPL(ms_hyperv);
@@ -338,9 +339,16 @@ static void __init ms_hyperv_init_platform(void)
 		x2apic_phys = 1;
 # endif
 
+	/* Register Hyper-V specific clocksource */
+	hv_init_clocksource();
 #endif
 }
 
+void hv_setup_sched_clock(void *sched_clock)
+{
+	pv_ops.time.sched_clock = sched_clock;
+}
+
 const __initconst struct hypervisor_x86 x86_hyper_ms_hyperv = {
 	.name			= "Microsoft Hyper-V",
 	.detect			= ms_hyperv_platform,
diff --git a/drivers/clocksource/hyperv_timer.c b/drivers/clocksource/hyperv_timer.c
index 86764ec9a854..eafca89b44d7 100644
--- a/drivers/clocksource/hyperv_timer.c
+++ b/drivers/clocksource/hyperv_timer.c
@@ -215,6 +215,7 @@ EXPORT_SYMBOL_GPL(hyperv_cs);
 #ifdef CONFIG_HYPERV_TSCPAGE
 
 static struct ms_hyperv_tsc_page tsc_pg __aligned(PAGE_SIZE);
+static u64 hv_sched_clock_offset __ro_after_init;
 
 struct ms_hyperv_tsc_page *hv_get_tsc_page(void)
 {
@@ -222,7 +223,7 @@ struct ms_hyperv_tsc_page *hv_get_tsc_page(void)
 }
 EXPORT_SYMBOL_GPL(hv_get_tsc_page);
 
-static u64 notrace read_hv_sched_clock_tsc(void)
+static u64 notrace read_hv_clock_tsc(struct clocksource *arg)
 {
 	u64 current_tick = hv_read_tsc_page(&tsc_pg);
 
@@ -232,9 +233,9 @@ static u64 notrace read_hv_sched_clock_tsc(void)
 	return current_tick;
 }
 
-static u64 read_hv_clock_tsc(struct clocksource *arg)
+static u64 read_hv_sched_clock_tsc(void)
 {
-	return read_hv_sched_clock_tsc();
+	return read_hv_clock_tsc(NULL) - hv_sched_clock_offset;
 }
 
 static struct clocksource hyperv_cs_tsc = {
@@ -246,7 +247,7 @@ static struct clocksource hyperv_cs_tsc = {
 };
 #endif
 
-static u64 notrace read_hv_sched_clock_msr(void)
+static u64 notrace read_hv_clock_msr(struct clocksource *arg)
 {
 	u64 current_tick;
 	/*
@@ -258,9 +259,9 @@ static u64 notrace read_hv_sched_clock_msr(void)
 	return current_tick;
 }
 
-static u64 read_hv_clock_msr(struct clocksource *arg)
+static u64 read_hv_sched_clock_msr(void)
 {
-	return read_hv_sched_clock_msr();
+	return read_hv_clock_msr(NULL) - hv_sched_clock_offset;
 }
 
 static struct clocksource hyperv_cs_msr = {
@@ -298,8 +299,9 @@ static bool __init hv_init_tsc_clocksource(void)
 	hv_set_clocksource_vdso(hyperv_cs_tsc);
 	clocksource_register_hz(&hyperv_cs_tsc, NSEC_PER_SEC/100);
 
-	/* sched_clock_register is needed on ARM64 but is a no-op on x86 */
-	sched_clock_register(read_hv_sched_clock_tsc, 64, HV_CLOCK_HZ);
+	hv_sched_clock_offset = hyperv_cs->read(hyperv_cs);
+	hv_setup_sched_clock(read_hv_sched_clock_tsc);
+
 	return true;
 }
 #else
@@ -329,7 +331,7 @@ void __init hv_init_clocksource(void)
 	hyperv_cs = &hyperv_cs_msr;
 	clocksource_register_hz(&hyperv_cs_msr, NSEC_PER_SEC/100);
 
-	/* sched_clock_register is needed on ARM64 but is a no-op on x86 */
-	sched_clock_register(read_hv_sched_clock_msr, 64, HV_CLOCK_HZ);
+	hv_sched_clock_offset = hyperv_cs->read(hyperv_cs);
+	hv_setup_sched_clock(read_hv_sched_clock_msr);
 }
 EXPORT_SYMBOL_GPL(hv_init_clocksource);
diff --git a/include/asm-generic/mshyperv.h b/include/asm-generic/mshyperv.h
index 0becb7d9704d..18d8e2d8210f 100644
--- a/include/asm-generic/mshyperv.h
+++ b/include/asm-generic/mshyperv.h
@@ -167,6 +167,7 @@ void hyperv_report_panic(struct pt_regs *regs, long err);
 void hyperv_report_panic_msg(phys_addr_t pa, size_t size);
 bool hv_is_hyperv_initialized(void);
 void hyperv_cleanup(void);
+void hv_setup_sched_clock(void *sched_clock);
 #else /* CONFIG_HYPERV */
 static inline bool hv_is_hyperv_initialized(void) { return false; }
 static inline void hyperv_cleanup(void) {}
-- 
2.14.5


  parent reply	other threads:[~2019-07-29  7:53 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-07-29  7:52 [PATCH 0/2] clocksource/Hyper-V: Add Hyper-V specific sched clock function lantianyu1986
2019-07-29  7:52 ` [PATCH 1/2] clocksource/Hyper-v: Allocate Hyper-V tsc page statically lantianyu1986
2019-08-12 18:39   ` Michael Kelley
2019-07-29  7:52 ` lantianyu1986 [this message]
2019-08-12 18:41   ` [PATCH 2/2] clocksource/Hyper-V: Add Hyper-V specific sched clock function Michael Kelley
2019-07-29 10:59 ` [PATCH 0/2] " Vitaly Kuznetsov
2019-07-29 11:09   ` Peter Zijlstra
2019-07-29 12:13     ` Vitaly Kuznetsov
2019-07-30 13:41       ` Tianyu Lan
2019-08-12 19:22         ` Michael Kelley
2019-08-13  8:33           ` Vitaly Kuznetsov
2019-08-20 14:32             ` Michael Kelley
2019-08-21  7:15               ` Vitaly Kuznetsov
2019-08-21  8:54                 ` Vitaly Kuznetsov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190729075243.22745-3-Tianyu.Lan@microsoft.com \
    --to=lantianyu1986@gmail.com \
    --cc=Tianyu.Lan@microsoft.com \
    --cc=arnd@arndb.de \
    --cc=ashal@kernel.org \
    --cc=bp@alien8.de \
    --cc=daniel.lezcano@linaro.org \
    --cc=haiyangz@microsoft.com \
    --cc=hpa@zytor.com \
    --cc=kys@microsoft.com \
    --cc=linux-arch@vger.kernel.org \
    --cc=linux-hyperv@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=michael.h.kelley@microsoft.com \
    --cc=mingo@redhat.com \
    --cc=sashal@kernel.org \
    --cc=sthemmin@microsoft.com \
    --cc=tglx@linutronix.de \
    --cc=x86@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).