From: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
To: Linus Walleij <linus.walleij@linaro.org>,
Masahiro Yamada <yamada.masahiro@socionext.com>,
linux-gpio@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org,
Masami Hiramatsu <masami.hiramatsu@linaro.org>,
Jassi Brar <jaswinder.singh@linaro.org>,
Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Subject: [PATCH v2 4/5] pinctrl: uniphier: Add Pro5 PCIe pin-mux settings
Date: Tue, 30 Jul 2019 14:43:29 +0900 [thread overview]
Message-ID: <1564465410-9165-5-git-send-email-hayashi.kunihiko@socionext.com> (raw)
In-Reply-To: <1564465410-9165-1-git-send-email-hayashi.kunihiko@socionext.com>
Pro5 PCIe interface uses the following pins:
XPERST, XPEWAKE, XPECLKRQ
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
---
drivers/pinctrl/uniphier/pinctrl-uniphier-pro5.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/pinctrl/uniphier/pinctrl-uniphier-pro5.c b/drivers/pinctrl/uniphier/pinctrl-uniphier-pro5.c
index 1d418e3..0c0af99 100644
--- a/drivers/pinctrl/uniphier/pinctrl-uniphier-pro5.c
+++ b/drivers/pinctrl/uniphier/pinctrl-uniphier-pro5.c
@@ -807,6 +807,8 @@ static const unsigned nand_pins[] = {19, 20, 21, 22, 23, 24, 25, 28, 29, 30,
static const int nand_muxvals[] = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0};
static const unsigned nand_cs1_pins[] = {26, 27};
static const int nand_cs1_muxvals[] = {0, 0};
+static const unsigned pcie_pins[] = {109, 110, 111};
+static const int pcie_muxvals[] = {0, 0, 0};
static const unsigned sd_pins[] = {250, 251, 252, 253, 254, 255, 256, 257, 258};
static const int sd_muxvals[] = {0, 0, 0, 0, 0, 0, 0, 0, 0};
static const unsigned spi0_pins[] = {120, 121, 122, 123};
@@ -902,6 +904,7 @@ static const struct uniphier_pinctrl_group uniphier_pro5_groups[] = {
UNIPHIER_PINCTRL_GROUP(i2c5b),
UNIPHIER_PINCTRL_GROUP(i2c5c),
UNIPHIER_PINCTRL_GROUP(i2c6),
+ UNIPHIER_PINCTRL_GROUP(pcie),
UNIPHIER_PINCTRL_GROUP(sd),
UNIPHIER_PINCTRL_GROUP(spi0),
UNIPHIER_PINCTRL_GROUP(spi1),
@@ -936,6 +939,7 @@ static const char * const i2c3_groups[] = {"i2c3"};
static const char * const i2c5_groups[] = {"i2c5", "i2c5b", "i2c5c"};
static const char * const i2c6_groups[] = {"i2c6"};
static const char * const nand_groups[] = {"nand", "nand_cs1"};
+static const char * const pcie_groups[] = {"pcie"};
static const char * const sd_groups[] = {"sd"};
static const char * const spi0_groups[] = {"spi0"};
static const char * const spi1_groups[] = {"spi1"};
@@ -967,6 +971,7 @@ static const struct uniphier_pinmux_function uniphier_pro5_functions[] = {
UNIPHIER_PINMUX_FUNCTION(i2c5),
UNIPHIER_PINMUX_FUNCTION(i2c6),
UNIPHIER_PINMUX_FUNCTION(nand),
+ UNIPHIER_PINMUX_FUNCTION(pcie),
UNIPHIER_PINMUX_FUNCTION(sd),
UNIPHIER_PINMUX_FUNCTION(spi0),
UNIPHIER_PINMUX_FUNCTION(spi1),
--
2.7.4
next prev parent reply other threads:[~2019-07-30 5:44 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-07-30 5:43 [PATCH v2 0/5] pinctrl: uniphier: Add some improvements and new settings Kunihiko Hayashi
2019-07-30 5:43 ` [PATCH v2 1/5] pinctrl: uniphier: Separate modem group from UART ctsrts group Kunihiko Hayashi
2019-07-30 14:29 ` Masahiro Yamada
2019-08-05 11:18 ` Linus Walleij
2019-07-30 5:43 ` [PATCH v2 2/5] pinctrl: uniphier: Add another audio I/O pin-mux settings for LD20 Kunihiko Hayashi
2019-07-30 14:29 ` Masahiro Yamada
2019-08-05 11:19 ` Linus Walleij
2019-07-30 5:43 ` [PATCH v2 3/5] pinctrl: uniphier: Add 5th LD20 MPEG2-TS input pin-mux setting Kunihiko Hayashi
2019-08-05 11:20 ` Linus Walleij
2019-07-30 5:43 ` Kunihiko Hayashi [this message]
2019-07-30 14:31 ` [PATCH v2 4/5] pinctrl: uniphier: Add Pro5 PCIe pin-mux settings Masahiro Yamada
2019-08-05 11:21 ` Linus Walleij
2019-07-30 5:43 ` [PATCH v2 5/5] pinctrl: uniphier: Fix Pro5 SD pin-mux setting Kunihiko Hayashi
2019-08-05 11:21 ` Linus Walleij
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1564465410-9165-5-git-send-email-hayashi.kunihiko@socionext.com \
--to=hayashi.kunihiko@socionext.com \
--cc=jaswinder.singh@linaro.org \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=masami.hiramatsu@linaro.org \
--cc=yamada.masahiro@socionext.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).