From: Matthias Kaehlcke <mka@chromium.org>
To: Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Heiko Stuebner <heiko@sntech.de>
Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-rockchip@lists.infradead.org, linux-kernel@vger.kernel.org,
Douglas Anderson <dianders@chromium.org>,
Matthias Kaehlcke <mka@chromium.org>
Subject: [PATCH] ARM: dts: rockchip: Add pin names for rk3288-veyron fievel
Date: Thu, 1 Aug 2019 15:03:54 -0700 [thread overview]
Message-ID: <20190801220354.142933-1-mka@chromium.org> (raw)
This is like commit 0ca87bd5baa6 ("ARM: dts: rockchip: Add pin names
for rk3288-veyron-jerry") and other similar commits, but for the
veyron fievel board (and tiger, which includes the fievel .dtsi).
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
---
arch/arm/boot/dts/rk3288-veyron-fievel.dts | 214 +++++++++++++++++++++
1 file changed, 214 insertions(+)
diff --git a/arch/arm/boot/dts/rk3288-veyron-fievel.dts b/arch/arm/boot/dts/rk3288-veyron-fievel.dts
index 696566f72d30..5c14a8fa6574 100644
--- a/arch/arm/boot/dts/rk3288-veyron-fievel.dts
+++ b/arch/arm/boot/dts/rk3288-veyron-fievel.dts
@@ -198,6 +198,220 @@
pinctrl-0 = <&drv_5v>;
};
+&gpio0 {
+ gpio-line-names = "PMIC_SLEEP_AP",
+ "DDRIO_PWROFF",
+ "DDRIO_RETEN",
+ "TS3A227E_INT_L",
+ "PMIC_INT_L",
+ "PWR_KEY_L",
+ "HUB_USB1_nFALUT",
+ "PHY_PMEB",
+
+ "PHY_INT",
+ "REC_MODE_L",
+ "OTP_OUT",
+ "",
+ "USB_OTG_POWER_EN",
+ "AP_WARM_RESET_H",
+ "USB_OTG_nFALUT",
+ "I2C0_SDA_PMIC",
+
+ "I2C0_SCL_PMIC",
+ "DEVMODE_L",
+ "USB_INT";
+};
+
+&gpio2 {
+ gpio-line-names = "CONFIG0",
+ "CONFIG1",
+ "CONFIG2",
+ "",
+ "",
+ "",
+ "",
+ "CONFIG3",
+
+ "",
+ "EMMC_RST_L",
+ "",
+ "",
+ "BL_PWR_EN",
+ "",
+ "TOUCH_INT",
+ "TOUCH_RST",
+
+ "I2C3_SCL_TP",
+ "I2C3_SDA_TP";
+};
+
+&gpio3 {
+ gpio-line-names = "FLASH0_D0",
+ "FLASH0_D1",
+ "FLASH0_D2",
+ "FLASH0_D3",
+ "FLASH0_D4",
+ "FLASH0_D5",
+ "FLASH0_D6",
+ "FLASH0_D7",
+
+ "VCC5V_GOOD_H",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+
+ "FLASH0_CS2/EMMC_CMD",
+ "",
+ "FLASH0_DQS/EMMC_CLKO",
+ "",
+ "",
+ "",
+ "",
+ "",
+
+ "PHY_TXD2",
+ "PHY_TXD3",
+ "MAC_RXD2",
+ "MAC_RXD3",
+ "PHY_TXD0",
+ "PHY_TXD1",
+ "MAC_RXD0",
+ "MAC_RXD1";
+};
+
+&gpio4 {
+ gpio-line-names = "MAC_MDC",
+ "MAC_RXDV",
+ "MAC_RXER",
+ "MAC_CLK",
+ "PHY_TXEN",
+ "MAC_MDIO",
+ "MAC_RXCLK",
+ "",
+
+ "PHY_RST",
+ "PHY_TXCLK",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+
+ "UART0_RXD",
+ "UART0_TXD",
+ "UART0_CTS_L",
+ "UART0_RTS_L",
+ "SDIO0_D0",
+ "SDIO0_D1",
+ "SDIO0_D2",
+ "SDIO0_D3",
+
+ "SDIO0_CMD",
+ "SDIO0_CLK",
+ "BT_DEV_WAKE",
+ "",
+ "WIFI_ENABLE_H",
+ "BT_ENABLE_L",
+ "WIFI_HOST_WAKE",
+ "BT_HOST_WAKE";
+};
+
+&gpio5 {
+ gpio-line-names = "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+
+ "",
+ "",
+ "",
+ "",
+ "USB_OTG_CTL1",
+ "HUB_USB2_CTL1",
+ "HUB_USB2_PWR_EN",
+ "HUB_USB_ILIM_SEL",
+
+ "USB_OTG_STATUS_L",
+ "HUB_USB1_CTL1",
+ "HUB_USB1_PWR_EN",
+ "VCC50_HDMI_EN";
+};
+
+&gpio6 {
+ gpio-line-names = "I2S0_SCLK",
+ "I2S0_LRCK_RX",
+ "I2S0_LRCK_TX",
+ "I2S0_SDI",
+ "I2S0_SDO0",
+ "HP_DET_H",
+ "",
+ "INT_CODEC",
+
+ "I2S0_CLK",
+ "I2C2_SDA",
+ "I2C2_SCL",
+ "MICDET",
+ "",
+ "",
+ "",
+ "",
+
+ "HUB_USB2_nFALUT",
+ "USB_OTG_ILIM_SEL";
+};
+
+&gpio7 {
+ gpio-line-names = "LCD_BL_PWM",
+ "PWM_LOG",
+ "BL_EN",
+ "PWR_LED1",
+ "TPM_INT_H",
+ "SPK_ON",
+ "FW_WP_AP",
+ "",
+
+ "CPU_NMI",
+ "DVSOK",
+ "",
+ "EDP_HPD",
+ "DVS1",
+ "",
+ "LCD_EN",
+ "DVS2",
+
+ "HDMI_CEC",
+ "I2C4_SDA",
+ "I2C4_SCL",
+ "I2C5_SDA_HDMI",
+ "I2C5_SCL_HDMI",
+ "5V_DRV",
+ "UART2_RXD",
+ "UART2_TXD";
+};
+
+&gpio8 {
+ gpio-line-names = "RAM_ID0",
+ "RAM_ID1",
+ "RAM_ID2",
+ "RAM_ID3",
+ "I2C1_SDA_TPM",
+ "I2C1_SCL_TPM",
+ "SPI2_CLK",
+ "SPI2_CS0",
+
+ "SPI2_RXD",
+ "SPI2_TXD";
+};
+
&pinctrl {
pinctrl-names = "default", "sleep";
pinctrl-0 = <
--
2.22.0.770.g0f2c4a37fd-goog
next reply other threads:[~2019-08-01 22:04 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-01 22:03 Matthias Kaehlcke [this message]
2019-08-02 22:35 ` [PATCH] ARM: dts: rockchip: Add pin names for rk3288-veyron fievel Heiko Stuebner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190801220354.142933-1-mka@chromium.org \
--to=mka@chromium.org \
--cc=devicetree@vger.kernel.org \
--cc=dianders@chromium.org \
--cc=heiko@sntech.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).