From: Johan Hovold <johan@kernel.org>
To: netdev@vger.kernel.org
Cc: Linus Walleij <linus.walleij@linaro.org>,
Vincent Cuissard <cuissard@marvell.com>,
Andrey Konovalov <andreyknvl@google.com>,
Dmitry Vyukov <dvyukov@google.com>,
linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org,
Johan Hovold <johan@kernel.org>, stable <stable@vger.kernel.org>,
syzbot+cf35b76f35e068a1107f@syzkaller.appspotmail.com
Subject: [PATCH] NFC: nfcmrvl: fix gpio-handling regression
Date: Mon, 5 Aug 2019 12:00:55 +0200 [thread overview]
Message-ID: <20190805100055.10398-1-johan@kernel.org> (raw)
Fix two reset-gpio sanity checks which were never converted to use
gpio_is_valid(), and make sure to use -EINVAL to indicate a missing
reset line also for the UART-driver module parameter and for the USB
driver.
This specifically prevents the UART and USB drivers from incidentally
trying to request and use gpio 0, and also avoids triggering a WARN() in
gpio_to_desc() during probe when no valid reset line has been specified.
Fixes: e33a3f84f88f ("NFC: nfcmrvl: allow gpio 0 for reset signalling")
Cc: stable <stable@vger.kernel.org> # 4.13
Reported-by: syzbot+cf35b76f35e068a1107f@syzkaller.appspotmail.com
Tested-by: syzbot+cf35b76f35e068a1107f@syzkaller.appspotmail.com
Signed-off-by: Johan Hovold <johan@kernel.org>
---
drivers/nfc/nfcmrvl/main.c | 4 ++--
drivers/nfc/nfcmrvl/uart.c | 4 ++--
drivers/nfc/nfcmrvl/usb.c | 1 +
3 files changed, 5 insertions(+), 4 deletions(-)
diff --git a/drivers/nfc/nfcmrvl/main.c b/drivers/nfc/nfcmrvl/main.c
index e65d027b91fa..529be35ac178 100644
--- a/drivers/nfc/nfcmrvl/main.c
+++ b/drivers/nfc/nfcmrvl/main.c
@@ -244,7 +244,7 @@ void nfcmrvl_chip_reset(struct nfcmrvl_private *priv)
/* Reset possible fault of previous session */
clear_bit(NFCMRVL_PHY_ERROR, &priv->flags);
- if (priv->config.reset_n_io) {
+ if (gpio_is_valid(priv->config.reset_n_io)) {
nfc_info(priv->dev, "reset the chip\n");
gpio_set_value(priv->config.reset_n_io, 0);
usleep_range(5000, 10000);
@@ -255,7 +255,7 @@ void nfcmrvl_chip_reset(struct nfcmrvl_private *priv)
void nfcmrvl_chip_halt(struct nfcmrvl_private *priv)
{
- if (priv->config.reset_n_io)
+ if (gpio_is_valid(priv->config.reset_n_io))
gpio_set_value(priv->config.reset_n_io, 0);
}
diff --git a/drivers/nfc/nfcmrvl/uart.c b/drivers/nfc/nfcmrvl/uart.c
index 9a22056e8d9e..e5a622ce4b95 100644
--- a/drivers/nfc/nfcmrvl/uart.c
+++ b/drivers/nfc/nfcmrvl/uart.c
@@ -26,7 +26,7 @@
static unsigned int hci_muxed;
static unsigned int flow_control;
static unsigned int break_control;
-static unsigned int reset_n_io;
+static int reset_n_io = -EINVAL;
/*
** NFCMRVL NCI OPS
@@ -231,5 +231,5 @@ MODULE_PARM_DESC(break_control, "Tell if UART driver must drive break signal.");
module_param(hci_muxed, uint, 0);
MODULE_PARM_DESC(hci_muxed, "Tell if transport is muxed in HCI one.");
-module_param(reset_n_io, uint, 0);
+module_param(reset_n_io, int, 0);
MODULE_PARM_DESC(reset_n_io, "GPIO that is wired to RESET_N signal.");
diff --git a/drivers/nfc/nfcmrvl/usb.c b/drivers/nfc/nfcmrvl/usb.c
index 945cc903d8f1..888e298f610b 100644
--- a/drivers/nfc/nfcmrvl/usb.c
+++ b/drivers/nfc/nfcmrvl/usb.c
@@ -305,6 +305,7 @@ static int nfcmrvl_probe(struct usb_interface *intf,
/* No configuration for USB */
memset(&config, 0, sizeof(config));
+ config.reset_n_io = -EINVAL;
nfc_info(&udev->dev, "intf %p id %p\n", intf, id);
--
2.22.0
next reply other threads:[~2019-08-05 10:02 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-05 10:00 Johan Hovold [this message]
2019-08-05 17:26 ` [PATCH] NFC: nfcmrvl: fix gpio-handling regression David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190805100055.10398-1-johan@kernel.org \
--to=johan@kernel.org \
--cc=andreyknvl@google.com \
--cc=cuissard@marvell.com \
--cc=dvyukov@google.com \
--cc=linus.walleij@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=stable@vger.kernel.org \
--cc=syzbot+cf35b76f35e068a1107f@syzkaller.appspotmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).