linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Yangtao Li <tiny.windzz@gmail.com>
To: rui.zhang@intel.com, edubezval@gmail.com,
	daniel.lezcano@linaro.org, robh+dt@kernel.org,
	mark.rutland@arm.com, maxime.ripard@bootlin.com, wens@csie.org,
	mchehab+samsung@kernel.org, davem@davemloft.net,
	gregkh@linuxfoundation.org, Jonathan.Cameron@huawei.com,
	nicolas.ferre@microchip.com
Cc: linux-pm@vger.kernel.org, devicetree@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, Yangtao Li <tiny.windzz@gmail.com>
Subject: [PATCH v5 11/18] thermal: sun8i: add thermal driver for h3
Date: Sat, 10 Aug 2019 05:28:22 +0000	[thread overview]
Message-ID: <20190810052829.6032-12-tiny.windzz@gmail.com> (raw)
In-Reply-To: <20190810052829.6032-1-tiny.windzz@gmail.com>

This patch adds the support for allwinner h3 thermal sensor.

Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
---
 drivers/thermal/sun8i_thermal.c | 91 +++++++++++++++++++++++++++++++++
 1 file changed, 91 insertions(+)

diff --git a/drivers/thermal/sun8i_thermal.c b/drivers/thermal/sun8i_thermal.c
index 47c20c4c69e7..41ce8cdc0546 100644
--- a/drivers/thermal/sun8i_thermal.c
+++ b/drivers/thermal/sun8i_thermal.c
@@ -27,6 +27,14 @@
 #define TEMP_TO_REG				672
 #define CALIBRATE_DEFAULT			0x800
 
+#define SUN8I_THS_CTRL0				0x00
+#define SUN8I_THS_CTRL2				0x40
+#define SUN8I_THS_IC				0x44
+#define SUN8I_THS_IS				0x48
+#define SUN8I_THS_MFC				0x70
+#define SUN8I_THS_TEMP_CALIB			0x74
+#define SUN8I_THS_TEMP_DATA			0x80
+
 #define SUN50I_THS_CTRL0			0x00
 #define SUN50I_H6_THS_ENABLE			0x04
 #define SUN50I_H6_THS_PC			0x08
@@ -36,6 +44,10 @@
 #define SUN50I_H6_THS_TEMP_CALIB		0xa0
 #define SUN50I_H6_THS_TEMP_DATA			0xc0
 
+#define SUN8I_THS_CTRL0_T_ACQ0(x)		(GENMASK(15, 0) & (x))
+#define SUN8I_THS_CTRL2_T_ACQ1(x)		((GENMASK(15, 0) & (x)) << 16)
+#define SUN8I_THS_DATA_IRQ_STS(x)		BIT(x + 8)
+
 #define SUN50I_THS_CTRL0_T_ACQ(x)		((GENMASK(15, 0) & (x)) << 16)
 #define SUN50I_THS_FILTER_EN			BIT(2)
 #define SUN50I_THS_FILTER_TYPE(x)		(GENMASK(1, 0) & (x))
@@ -121,6 +133,23 @@ static const struct regmap_config config = {
 	.fast_io = true,
 };
 
+static int sun8i_h3_irq_ack(struct ths_device *tmdev)
+{
+	int i, state, ret = 0;
+
+	regmap_read(tmdev->regmap, SUN8I_THS_IS, &state);
+
+	for (i = 0; i < tmdev->chip->sensor_num; i++) {
+		if (state & SUN8I_THS_DATA_IRQ_STS(i)) {
+			regmap_write(tmdev->regmap, SUN8I_THS_IS,
+				     SUN8I_THS_DATA_IRQ_STS(i));
+			ret |= BIT(i);
+		}
+	}
+
+	return ret;
+}
+
 static int sun50i_h6_irq_ack(struct ths_device *tmdev)
 {
 	int i, state, ret = 0;
@@ -154,6 +183,26 @@ static irqreturn_t sun8i_irq_thread(int irq, void *data)
 	return IRQ_HANDLED;
 }
 
+static int sun8i_h3_ths_calibrate(struct ths_device *tmdev,
+				  u16 *caldata, int callen)
+{
+	int i;
+
+	if (!caldata[0] || callen < 2 * tmdev->chip->sensor_num)
+		return -EINVAL;
+
+	for (i = 0; i < tmdev->chip->sensor_num; i++) {
+		int offset = (i % 2) << 4;
+
+		regmap_update_bits(tmdev->regmap,
+				   SUN8I_THS_TEMP_CALIB + (4 * (i >> 1)),
+				   0xfff << offset,
+				   caldata[i] << offset);
+	}
+
+	return 0;
+}
+
 static int sun50i_h6_ths_calibrate(struct ths_device *tmdev,
 				   u16 *caldata, int callen)
 {
@@ -319,6 +368,36 @@ static int sun8i_ths_resource_init(struct ths_device *tmdev)
 	return ret;
 }
 
+static int sun8i_h3_thermal_init(struct ths_device *tmdev)
+{
+	int val;
+
+	/* average over 4 samples */
+	regmap_write(tmdev->regmap, SUN8I_THS_MFC,
+		     SUN50I_THS_FILTER_EN |
+		     SUN50I_THS_FILTER_TYPE(1));
+	/*
+	 * period = (x + 1) * 4096 / clkin; ~10ms
+	 * enable data interrupt
+	 */
+	val = GENMASK(7 + tmdev->chip->sensor_num, 8);
+	regmap_write(tmdev->regmap, SUN8I_THS_IC,
+		     SUN50I_H6_THS_PC_TEMP_PERIOD(58) | val);
+	/*
+	 * clkin = 24MHz
+	 * T acquire = clkin / (x + 1)
+	 *           = 20us
+	 * enable sensor
+	 */
+	regmap_write(tmdev->regmap, SUN8I_THS_CTRL0,
+		     SUN8I_THS_CTRL0_T_ACQ0(479));
+	val = GENMASK(tmdev->chip->sensor_num - 1, 0);
+	regmap_write(tmdev->regmap, SUN8I_THS_CTRL2,
+		     SUN8I_THS_CTRL2_T_ACQ1(479) | val);
+
+	return 0;
+}
+
 static int sun50i_h6_thermal_init(struct ths_device *tmdev)
 {
 	int val;
@@ -425,6 +504,17 @@ static int sun8i_ths_remove(struct platform_device *pdev)
 	return 0;
 }
 
+static const struct ths_thermal_chip sun8i_h3_ths = {
+	.sensor_num = 1,
+	.offset = -1794,
+	.scale = -121,
+	.has_mod_clk = true,
+	.temp_data_base = SUN8I_THS_TEMP_DATA,
+	.calibrate = sun8i_h3_ths_calibrate,
+	.init = sun8i_h3_thermal_init,
+	.irq_ack = sun8i_h3_irq_ack,
+};
+
 static const struct ths_thermal_chip sun50i_h6_ths = {
 	.sensor_num = 2,
 	.offset = -2794,
@@ -437,6 +527,7 @@ static const struct ths_thermal_chip sun50i_h6_ths = {
 };
 
 static const struct of_device_id of_ths_match[] = {
+	{ .compatible = "allwinner,sun8i-h3-ths", .data = &sun8i_h3_ths },
 	{ .compatible = "allwinner,sun50i-h6-ths", .data = &sun50i_h6_ths },
 	{ /* sentinel */ },
 };
-- 
2.17.1


  parent reply	other threads:[~2019-08-10  5:30 UTC|newest]

Thread overview: 44+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-08-10  5:28 [PATCH v5 00/18] add thermal driver for h6 Yangtao Li
2019-08-10  5:28 ` [PATCH v5 01/18] thermal: sun8i: " Yangtao Li
2019-09-01  2:06   ` Ondřej Jirman
2019-09-01 21:04   ` Ondřej Jirman
2019-08-10  5:28 ` [PATCH v5 02/18] dt-bindings: thermal: add binding document for h6 thermal controller Yangtao Li
2019-08-12  8:56   ` Maxime Ripard
2019-08-12 23:40     ` Frank Lee
2019-08-16  9:47       ` Maxime Ripard
2019-08-10  5:28 ` [PATCH v5 03/18] thermal: fix indentation in makefile Yangtao Li
2019-08-28 12:40   ` Zhang Rui
2019-08-10  5:28 ` [PATCH v5 04/18] thermal: sun8i: get ths sensor number from device compatible Yangtao Li
2019-08-10  5:28 ` [PATCH v5 05/18] thermal: sun8i: rework for sun8i_ths_get_temp() Yangtao Li
2019-08-10  5:28 ` [PATCH v5 06/18] thermal: sun8i: get ths init func from device compatible Yangtao Li
2019-08-10  5:28 ` [PATCH v5 07/18] thermal: sun8i: rework for ths irq handler func Yangtao Li
2019-08-10  5:28 ` [PATCH v5 08/18] thermal: sun8i: support mod clocks Yangtao Li
2019-08-10  6:16   ` Vasily Khoruzhick
2019-08-12 23:46     ` Frank Lee
2019-08-12 23:54       ` Vasily Khoruzhick
2019-08-13 20:06         ` Ondřej Jirman
2019-08-14  3:01           ` Vasily Khoruzhick
2019-08-25 16:14             ` Frank Lee
2019-10-21  3:41               ` Vasily Khoruzhick
2019-08-10  5:28 ` [PATCH v5 09/18] thermal: sun8i: rework for ths calibrate func Yangtao Li
2019-08-28 12:45   ` Zhang Rui
2019-08-10  5:28 ` [PATCH v5 10/18] dt-bindings: thermal: add binding document for h3 thermal controller Yangtao Li
2019-08-27 15:26   ` Rob Herring
2019-08-10  5:28 ` Yangtao Li [this message]
2019-08-10  5:28 ` [PATCH v5 12/18] dt-bindings: thermal: add binding document for a64 " Yangtao Li
2019-08-27 15:26   ` Rob Herring
2019-08-10  5:28 ` [PATCH v5 13/18] thermal: sun8i: add thermal driver for A64 Yangtao Li
2019-08-10  5:28 ` [PATCH v5 14/18] dt-bindings: thermal: add binding document for h5 thermal controller Yangtao Li
2019-08-27 15:27   ` Rob Herring
2019-08-10  5:28 ` [PATCH v5 15/18] thermal: sun8i: allow to use custom temperature calculation function Yangtao Li
2019-08-12  8:49   ` Maxime Ripard
2019-08-10  5:28 ` [PATCH v5 16/18] thermal: sun8i: add support for Allwinner H5 thermal sensor Yangtao Li
2019-08-10  5:28 ` [PATCH v5 17/18] dt-bindings: thermal: add binding document for r40 thermal controller Yangtao Li
2019-08-27 15:27   ` Rob Herring
2019-08-10  5:28 ` [PATCH v5 18/18] thermal: sun8i: add support for Allwinner R40 thermal sensor Yangtao Li
2019-08-11 21:14 ` [PATCH v5 00/18] add thermal driver for h6 Clément Péron
2019-08-12 23:36   ` Frank Lee
2019-09-01 21:52 ` Ondřej Jirman
2019-09-02  7:27   ` Maxime Ripard
2019-09-02 10:58     ` Ondřej Jirman
2019-11-26 19:36       ` Vasily Khoruzhick

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190810052829.6032-12-tiny.windzz@gmail.com \
    --to=tiny.windzz@gmail.com \
    --cc=Jonathan.Cameron@huawei.com \
    --cc=daniel.lezcano@linaro.org \
    --cc=davem@davemloft.net \
    --cc=devicetree@vger.kernel.org \
    --cc=edubezval@gmail.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=maxime.ripard@bootlin.com \
    --cc=mchehab+samsung@kernel.org \
    --cc=nicolas.ferre@microchip.com \
    --cc=robh+dt@kernel.org \
    --cc=rui.zhang@intel.com \
    --cc=wens@csie.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).