From: Jiada Wang <jiada_wang@mentor.com>
To: <nick@shmanahar.org>, <dmitry.torokhov@gmail.com>
Cc: <linux-input@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<jiada_wang@mentor.com>, <george_davis@mentor.com>
Subject: [PATCH v1 23/63] Input: atmel_mxt_ts - improve bootloader state machine handling
Date: Fri, 16 Aug 2019 17:32:58 +0900 [thread overview]
Message-ID: <20190816083338.18685-4-jiada_wang@mentor.com> (raw)
In-Reply-To: <20190816083338.18685-1-jiada_wang@mentor.com>
From: Nick Dyer <nick.dyer@itdev.co.uk>
The code is much clearer if we switch on the actual state the bootloader
is in, rather than the state we want it to be in, and allows the removal
of a goto retry tangle.
Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk>
(cherry picked from ndyer/linux/for-upstream commit 463e15ee95ee6e6274017ff645839dbe34d75c99)
[gdavis: Squash fix from George G. Davis:
- input: atmel_mxt_ts - Fix 'mxt_send_bootloader_cmd' was not
declared warning]
Signed-off-by: George G. Davis <george_davis@mentor.com>
---
Notes:
- Squash fix from George G. Davis:
+ input: atmel_mxt_ts - Fix 'mxt_send_bootloader_cmd' was not declared warning
The following sparse warning was introduced by ndyer/linux/for-upstream
commit 463e15ee95ee ("Input: atmel_mxt_ts - improve bootloader state
machine handling"):
drivers/input/touchscreen/atmel_mxt_ts.c:888:5: warning: symbol 'mxt_send_bootloader_cmd' was not declared. Should it be static?
Fix the above sparse warning by restoring the 'mxt_send_bootloader_cmd'
static declaration which was errantly removed by
ndyer/linux/for-upstream commit 463e15ee95ee ("Input: atmel_mxt_ts -
improve bootloader state machine handling").
Signed-off-by: Jiada Wang <jiada_wang@mentor.com>
---
drivers/input/touchscreen/atmel_mxt_ts.c | 183 ++++++++++++-----------
1 file changed, 98 insertions(+), 85 deletions(-)
diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index 2a5f2157c322..ca882231ab41 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -305,6 +305,8 @@ struct mxt_flash {
size_t frame_size;
unsigned int count;
unsigned int retry;
+ u8 previous;
+ bool complete;
};
/* Each client has this additional data */
@@ -583,64 +585,121 @@ static int mxt_probe_bootloader(struct mxt_data *data, bool alt_address)
return 0;
}
-static int mxt_check_bootloader(struct mxt_data *data, unsigned int state,
- bool wait)
+static int mxt_send_bootloader_cmd(struct mxt_data *data, bool unlock);
+
+static int mxt_write_firmware_frame(struct mxt_data *data, struct mxt_flash *f)
+{
+ f->frame = (struct mxt_fw_frame *)(f->fw->data + f->pos);
+
+ /* Take account of CRC bytes */
+ f->frame_size = __be16_to_cpu(f->frame->size) + 2U;
+
+ /* Write one frame to device */
+ return mxt_bootloader_write(data, f->fw->data + f->pos,
+ f->frame_size);
+}
+
+static int mxt_check_bootloader(struct mxt_data *data, struct mxt_flash *f)
{
struct device *dev = &data->client->dev;
- u8 val;
+ u8 state;
int ret;
-recheck:
- if (wait) {
+ /*
+ * In application update mode, the interrupt
+ * line signals state transitions. We must wait for the
+ * CHG assertion before reading the status byte.
+ * Once the status byte has been read, the line is deasserted.
+ */
+ ret = mxt_wait_for_completion(data, &data->bl_completion,
+ MXT_FW_CHG_TIMEOUT);
+ if (ret) {
/*
- * In application update mode, the interrupt
- * line signals state transitions. We must wait for the
- * CHG assertion before reading the status byte.
- * Once the status byte has been read, the line is deasserted.
+ * TODO: handle -ERESTARTSYS better by terminating
+ * fw update process before returning to userspace
+ * by writing length 0x000 to device (iff we are in
+ * WAITING_FRAME_DATA state).
*/
- ret = mxt_wait_for_completion(data, &data->bl_completion,
- MXT_FW_CHG_TIMEOUT);
- if (ret) {
- /*
- * TODO: handle -ERESTARTSYS better by terminating
- * fw update process before returning to userspace
- * by writing length 0x000 to device (iff we are in
- * WAITING_FRAME_DATA state).
- */
- dev_err(dev, "Update wait error %d\n", ret);
- return ret;
- }
+ dev_warn(dev, "Update wait error %d\n", ret);
}
- ret = mxt_bootloader_read(data, &val, 1);
+ ret = mxt_bootloader_read(data, &state, 1);
if (ret)
return ret;
+ /* Remove don't care bits */
+ if (state & ~MXT_BOOT_STATUS_MASK)
+ state &= ~MXT_BOOT_STATUS_MASK;
+
switch (state) {
case MXT_WAITING_BOOTLOAD_CMD:
+ dev_info(dev, "Unlocking bootloader\n");
+ ret = mxt_send_bootloader_cmd(data, true);
+ if (ret)
+ return ret;
+
+ break;
+
case MXT_WAITING_FRAME_DATA:
- case MXT_APP_CRC_FAIL:
- val &= ~MXT_BOOT_STATUS_MASK;
+ if ((f->previous != MXT_WAITING_BOOTLOAD_CMD)
+ && (f->previous != MXT_FRAME_CRC_PASS)
+ && (f->previous != MXT_FRAME_CRC_FAIL))
+ goto unexpected;
+
+ ret = mxt_write_firmware_frame(data, f);
+ if (ret)
+ return ret;
+
+ break;
+
+ case MXT_FRAME_CRC_CHECK:
+ if (f->previous != MXT_WAITING_FRAME_DATA)
+ goto unexpected;
break;
+
case MXT_FRAME_CRC_PASS:
- if (val == MXT_FRAME_CRC_CHECK) {
- goto recheck;
- } else if (val == MXT_FRAME_CRC_FAIL) {
- dev_err(dev, "Bootloader CRC fail\n");
- return -EINVAL;
+ if (f->previous != MXT_FRAME_CRC_CHECK)
+ goto unexpected;
+
+ /* Next frame */
+ f->retry = 0;
+ f->pos += f->frame_size;
+ f->count++;
+
+ if (f->pos >= f->fw->size) {
+ f->complete = true;
+ dev_info(dev, "Sent %u frames, %zu bytes\n",
+ f->count, f->fw->size);
+ } else if (f->count % 50 == 0) {
+ dev_dbg(dev, "Sent %u frames, %lld/%zu bytes\n",
+ f->count, f->pos, f->fw->size);
}
+
+ break;
+
+ case MXT_FRAME_CRC_FAIL:
+ if (f->retry > 20) {
+ dev_err(dev, "Retry count exceeded\n");
+ return -EIO;
+ }
+
+ /* Back off by 20ms per retry */
+ dev_dbg(dev, "Bootloader frame CRC failure\n");
+ f->retry++;
+ msleep(f->retry * 20);
break;
+
default:
return -EINVAL;
}
- if (val != state) {
- dev_err(dev, "Invalid bootloader state %02X != %02X\n",
- val, state);
- return -EINVAL;
- }
+ f->previous = state;
return 0;
+
+unexpected:
+ dev_err(dev, "Unexpected state transition\n");
+ return -EINVAL;
}
static int mxt_send_bootloader_cmd(struct mxt_data *data, bool unlock)
@@ -3297,57 +3356,13 @@ static int mxt_load_fw(struct device *dev)
if (ret)
goto release_firmware;
- ret = mxt_check_bootloader(data, MXT_WAITING_BOOTLOAD_CMD, false);
- if (ret) {
- /* Bootloader may still be unlocked from previous attempt */
- ret = mxt_check_bootloader(data, MXT_WAITING_FRAME_DATA, false);
- if (ret)
- goto disable_irq;
- } else {
- dev_info(dev, "Unlocking bootloader\n");
-
- /* Unlock bootloader */
- ret = mxt_send_bootloader_cmd(data, true);
+ while (true) {
+ ret = mxt_check_bootloader(data, &f);
if (ret)
- goto disable_irq;
- }
-
- while (f.pos < f.fw->size) {
- f.frame = (struct mxt_fw_frame *)(f.fw->data + f.pos);
-
- ret = mxt_check_bootloader(data, MXT_WAITING_FRAME_DATA, true);
- if (ret)
- goto disable_irq;
-
- /* Take account of CRC bytes */
- f.frame_size = __be16_to_cpu(f.frame->size) + 2U;
-
- /* Write one frame to device */
- ret = mxt_bootloader_write(data, f.fw->data + f.pos,
- f.frame_size);
- if (ret)
- goto disable_irq;
-
- ret = mxt_check_bootloader(data, MXT_FRAME_CRC_PASS, true);
- if (ret) {
- f.retry++;
-
- /* Back off by 20ms per retry */
- msleep(f.retry * 20);
-
- if (f.retry > 20) {
- dev_err(dev, "Retry count exceeded\n");
- goto disable_irq;
- }
- } else {
- f.retry = 0;
- f.pos += f.frame_size;
- f.count++;
- }
+ return ret;
- if (f.count % 50 == 0)
- dev_dbg(dev, "Sent %u frames, %lld/%zu bytes\n",
- f.count, f.pos, f.fw->size);
+ if (f.complete)
+ break;
}
/* Wait for flash. */
@@ -3356,7 +3371,6 @@ static int mxt_load_fw(struct device *dev)
if (ret)
goto disable_irq;
- dev_dbg(dev, "Sent %u frames, %lld bytes\n", f.count, f.pos);
/*
* Wait for device to reset. Some bootloader versions do not assert
@@ -3366,7 +3380,6 @@ static int mxt_load_fw(struct device *dev)
mxt_wait_for_completion(data, &data->bl_completion, MXT_FW_RESET_TIME);
data->in_bootloader = false;
-
disable_irq:
disable_irq(data->irq);
release_firmware:
--
2.19.2
next prev parent reply other threads:[~2019-08-16 8:33 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-16 8:32 [PATCH v1 20/63] Input: atmel_mxt_ts - refactor firmware flash to extract context into struct Jiada Wang
2019-08-16 8:32 ` [PATCH v1 21/63] Input: atmel_mxt_ts - refactor code to enter bootloader into separate func Jiada Wang
2019-08-16 8:32 ` [PATCH v1 22/63] Input: atmel_mxt_ts - combine bootloader version query with probe Jiada Wang
2019-08-16 8:32 ` Jiada Wang [this message]
2019-08-16 8:32 ` [PATCH v1 24/63] Input: atmel_mxt_ts - check firmware format before entering bootloader Jiada Wang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190816083338.18685-4-jiada_wang@mentor.com \
--to=jiada_wang@mentor.com \
--cc=dmitry.torokhov@gmail.com \
--cc=george_davis@mentor.com \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nick@shmanahar.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).