[v1,49/63] Input: Atmel: Improve error handling in mxt_initialize_input_device()
diff mbox series

Message ID 20190816083724.19341-5-jiada_wang@mentor.com
State Superseded
Headers show
Series
  • atmel_mxt_ts misc
Related show

Commit Message

Jiada Wang Aug. 16, 2019, 8:37 a.m. UTC
From: Deepak Das <deepak_das@mentor.com>

Currently Driver probe continues with a warning message when it fails to
get the proper multitouch object configurations like TouchScreen resolution.
But Driver probe should fail in case of above scneario because it will not behave
as expected without the proper touchscreen configurations.

This commit modifies mxt_initialize_input_device() to return error when it fails
to get the proper touch screen configurations.

Signed-off-by: Deepak Das <deepak_das@mentor.com>
Signed-off-by: Dean Jenkins <Dean_Jenkins@mentor.com>
Signed-off-by: George G. Davis <george_davis@mentor.com>
Signed-off-by: Jiada Wang <jiada_wang@mentor.com>
---
 drivers/input/touchscreen/atmel_mxt_ts.c | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)

Patch
diff mbox series

diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index 27b908a50b66..b17af89a4711 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -2749,15 +2749,19 @@  static int mxt_initialize_input_device(struct mxt_data *data)
 	case MXT_TOUCH_MULTI_T9:
 		num_mt_slots = data->T9_reportid_max - data->T9_reportid_min + 1;
 		error = mxt_read_t9_resolution(data);
-		if (error)
-			dev_warn(dev, "Failed to initialize T9 resolution\n");
+		if (error) {
+			dev_err(dev, "Failed to initialize T9 resolution\n");
+			return error;
+		}
 		break;
 
 	case MXT_TOUCH_MULTITOUCHSCREEN_T100:
 		num_mt_slots = data->num_touchids;
 		error = mxt_read_t100_config(data);
-		if (error)
-			dev_warn(dev, "Failed to read T100 config\n");
+		if (error) {
+			dev_err(dev, "Failed to read T100 config\n");
+			return error;
+		}
 		break;
 
 	default: